EMD Millipore* Direct-Q* 3 Tap to Pure and Ultrapure Water Purification System
Provide Type I and Type III water from potable tap water Ideal for laboratories that do not have easy access to pretreated water and need between 1 and 10 L of ultrapure water per day. · Produce Type 1 ultrapure water (18.2 Mwcm resistivity at 25°C and >10 ppb Total
Millipore* Vent Filters S.D.S Systems (purchased after 12/30/03)
Protect high-resistivity water product from ingress of possible airborne contaminants from the environment into S.D.S tank during storage · Filter incorporates activated carbon to absorb volatile organics, soda lime bed to remove carbon dioxide, and an absolute membrane to remove
5
Millipore* RiOs* 30/50/100/200 Water Purification Systems
Can serve a single lab, suite of labs, or an entire laboratory building, depending on model Combine water purification, storage, distribution and control in a single unit. Provide hundreds to thousands of L/day of Type III laboratory grade water from tap. Key Features · Utilize
6
Millipore* Milli-Q* Integral Systems
Produce pressurized Type II pure and Type I ultrapure water in a single unit—directly from tap water Combine proven Elix* and Milli-Q technologies to allow complete control over the quality and volume of water required in the lab. Separate points of delivery (PODs) offer convenience and
Millipore* RiOs* 5/8/16 Reverse Osmosis Systems
Ideal for general laboratory use Produce up to 16L/hr. of Type III water from tap water by reverse osmosis (RO). Key Features · Two purification steps in one compact unit · Plug-in Progard* pretreatment pack
Millipore* Milli-Q* Ultrapure Water Systems
Five systems support HPLC, IC, GC/MS, ICP-MS, PCR, 2-D electrophoresis, tissue culture, molecular biology, and more Polish pretreated water to produce up to 11/2 qt./min. (1.5L/min.) ultrapure reagent-grade Type I water with 18.2 megohm·cm resistivity and <10ppb TOC. Accept water pretreated
11
Millipore* Super-Q* Plus High-Volume Water Purification Systems
Produce up to 12L/min. of Type I ultrapure water High-flow water systems provide final polish to water which has been pretreated by reverse osmosis, deionization or distillation. Eliminates need for water storage systems. Consistenlty produce ultrapure quality water that exceeds Type I ASTM*/CAP/CLSi
12
EMD Millipore* Wall Mounting Bracket for Washer Distribution Kit
Reversible R/L mounting for use with PE reservoir · For mounting Washer Distribution Kit to a wall, adjacent to 30/60/100L pure water storage reservoir · For use with Elix* Advantage and RiOs* 3 · Wall mounting bracket
13
Millipore* Water Detector for Water Purification Systems
Feedwater is automatically shut off if water is detected in case of leak. For use with all Millipore* Water Purification Systems. Up to four sensors can be connected to controller. Includes one water sensor with cable solenoid valve, and controller. 120V
14
EMD Millipore* Direct-Q* 8 Tap to Pure and Ultrapure Water Purification System
Provide Type I and Type III water from potable tap water Ideal for laboratories that do not have easy access to pretreated water and need between 1 and 10L of ultrapure water per day. · Produce Type 1 ultrapure water (18.2 Mwcm resistivity at 25°C and >10 ppb Total
EMD Millipore* Milli-Q* Reference A+ System
Provides an indication if the TOC (total oxidizable carbon) value of the product water is less than the 5ppb Milli-Q Reference specification limit. Ideal for organic-contamination–sensitive applications like HPLC. Adds to the Milli-Q Reference system · Provides
EMD Millipore* Direct-Q* 5 Tap to Pure and Ultrapure Water Purification System
Provide Type I and Type III water from potable tap water Ideal for laboratories that do not have easy access to pretreated water and need between 1 and 10 L of ultrapure water per day. · Produce Type 1 ultrapure water (18.2 Mwcm resistivity at 25°C and >10 ppb Total
19
Millipore* Inlet Pressure Regulator for Millipore Water Purification Systems
Required when feedwater pressure exceeds 4.35psi (0.3 bar) · Installs upstream of Milli-Q* Ultrapure, all Synergy*, all Direct-Q*, low-volume Elix* 3/5/10, and RiOs* 3/5/8/16 water purification systems to control feedwater line pressure ·
20
Millipore* Milli-Q* Academic Bench-integrated Water Purification System (non-TOC)
Utilizes the standard three-steps purification process - pretreatment, application specific polishing and final filtration to produce Type 1, reagent-grade water A three-step purification process and periodic recirculation of water ensure delivery of high-purity water immediately upon demand. · Components
21
Millipore* Pure Water Storage Reservoir Distribution Pump
Magnetically coupled centrifugal pump delivers pressurized water to water purification systems or laboratory equipment such as glassware washers · Fits into base of Millipore* Pure Water Storage Reservoirs · Provides quiet, maintenance-free operation for
22
Millipore LC-Pak* Point-of-Use Polisher
Ultrapure water assurance The LC-Pak* is designed to provide scientists with the certitude that the ultrapure water that they are using in critical organic molecules analysis at trace and ultra-trace levels will be adequate. · Can be connected to the outlet of existing
Millipore* RiOs*-DI 3 Water Purification Systems
Ideal for low-volume, routine laboratory applications Produce 10L/day of high-quality analytical grade (Type II) water from tap water. Combine reverse osmosis technology with deionization resins to produce pure water of high resistivity and low TOC (>10 megohm·cm and <50ppb). Product water
Please wait...
Millipore* Wall Bracket for RiOs II, RO-DI, Simplicity II and Direct-Q II Water Purification Systems