Labconco™ RXPert™ Single Filtered Balance Systems

The patented RXPert Filtered Balance System is Class I Enclosure that meets USP <800> requirements for non-sterile compounding when ducted. Models feature an all-in-one factory-installed canopy and damper for thimble ducting to the outside.

Catalog Number	Mfr. No.	Width (Metric)	Height (Metric)	Includes	Weight
10-304-172	Labconco™ 3971202	60.9cm	94.2cm	Epoxy resin work surface	116kg (225 lb.)
10-304-171	Labconco™ 3971201	60.9cm	94.2cm	Stainless steel work surface	111kg (245 lb.)
10-304-170	Labconco™ 3971200	60.9cm	94.2cm	N/A	93kg (205 lb.)
10-304-175	Labconco™ 3971302	91.4cm	94.2cm	Epoxy resin work surface	151kg (333 lb.)
10-304-174	Labconco™ 3971301	91.4cm	94.2cm	Stainless steel work surface	144kg (318 lb.)
10-304-173	Labconco™ 3971300	91.4cm	94.2cm	N/A	117kg (258 lb.)
10-304-178	Labconco™ 3971402	121.9cm	94.2cm	Epoxy resin work surface	186kg (411 lb.)f
10-304-177	Labconco™ 3971401	121.9cm	94.2cm	Stainless steel work surface	177kg (391 lb.)
10-304-176	Labconco™ 3971400	121.9cm	94.2cm	N/A	141kg (311 lb.)
10-305-005	Labconco™ 3971475	121.9cm	128cm	N/A	129kg (285 lb.)
10-305-006	Labconco™ 3971476	121.9cm	128cm	Stainless steel work surface	175kg (385 lb.)
10-305-007	Labconco™ 3971477	121.9cm	128cm	Epoxy resin work surface	193kg (425 lb.)
10-305-008	Labconco™ 3971495	121.9cm	128cm	N/A	143kg (315 lb.)
10-305-009	Labconco™ 3971496	121.9cm	128cm	Stainless steel work surface	188kg (415 lb.)
10-305-010	Labconco™ 3971497	121.9cm	128cm	Epoxy resin work surface	206kg (455 lb.)
10-305-011	Labconco™ 3971575	152.4cm	128cm	N/A	227kg (500 lb.)
10-305-012	Labconco™ 3971576	152.4cm	128cm	Stainless steel work surface	256kg (565 lb.)
10-305-013	Labconco™ 3971577	152.4cm	128cm	Epoxy resin work surface	274kg (605 lb.)
10-305-014	Labconco™ 3971595	152.4cm	128cm	N/A	256kg (565 lb.)
10-305-015	Labconco™ 3971596	152.4cm	128cm	Stainless steel work surface	286kg (630 lb.)
10-305-016	Labconco™ 3971597	152.4cm	128cm	Epoxy resin work surface	304kg (670 lb.)
10-305-017	Labconco™ 3971675	182.8cm	128cm	N/A	272kg (600 lb.)
10-305-018	Labconco™ 3971676	182.8cm	128cm	Stainless steel work surface	302kg (665 lb.)
10-305-019	Labconco™ 3971677	182.8cm	128cm	Epoxy resin work surface	320kg (705 lb.)
10-305-020	Labconco™ 3971695	182.8cm	128cm	N/A	290kg (640 lb.)
10-305-021	Labconco™ 3971696	182.8cm	128cm	Stainless steel work surface	320kg (705 lb.)
10-305-022	Labconco™ 3971697	182.8cm	128cm	Epoxy resin work surface	338kg (745 lb.)

Description

• Quiet operation
• HEPA filtered enclosure for powder weighing
• Fully scannable filter
• Bag-in/bag-out HEPA filter for protection during filter changes
• Glass and steel construction
• Ergonomic air foil with aerodynamic patented Clean-Sweep airflow openings
• Guardian airflow monitor that continuously monitors airflow with visable and audible alarms when airflow is outside set point range
• Upper dilution air supply and upper containment sash foil
• Zone-perforated, pivoting rear baffle
• Side-entry air foils
• Intrinsically safe, negative pressure design
• Exhaust HEPA filter, 99.99% efficient on particles 0.3 micron in size
• Pressure gauge
• Space-saving design and no separate filtered exhauster is required
• Two utility ports with iris openings
• Tempered safety glass 6.35mm (0.25 in.) thick front sash and sides
• Ergonomic angled and hinged, pivoting sash with wiping seal
• Canopy Connection, factory-installed, powder-coated steel
• Manual Duct Damper, powder-coated steel

Specifications

• Type: Balance Enclosure
• Electrical Requirements: 115V, 60Hz
• Lighting: Fluorescent lamp
• Item Description: Certifications: ANSI Z9.5, CAN/CSA C22.2, Modified ASHRAE 110, SEFA 1, UL 61010