Labconco™ XPert™ Weigh Box

Protects operator when weighing hazardous samples

Manufacturer:  Labconco™ 5220300

Catalog No. 10-358-106

Includes:

• Integral neoprene gloves (size 9.75, 30 in. (76cm) long, 15mil gauge)
• 22w fluorescent lamp
• Interior ceiling-mounted electrical duplex receptacle with 5A (115V model) or 2A (230V model) circuit load
• Built-in blower with speed control capable of airflow from 13 to 100cfm
• Antistatic ionizer fan mounted on interior ceiling
• Switches for light, blower, and innermost interior receptacle wired for ionizer fan
• Balance vibration isolator, consisting of marble slab with isolator pads and Type 304 stainless-steel cover
• Inlet and outlet HEPA filters and test port for challenging HEPA filter
• Main chamber static pressure gauge to monitor HEPA filter loading integrity

Description

In addition to HEPA inlet and outlet filters, box includes an anti-static ionizer fan to reduce static charge and a balance vibration isolator.

Design Features

• One-piece molded, medium-density polyethylene shell
• Dry powder-coated steel superstructure and interior shelf of transfer chamber
• Approx. 13 cu. ft. main chamber
• 0.26 in. thick (0.64cm) laminated safety glass viewing window with powder-coated steel frame and neoprene gasket; cut-out is 26.38 x 12.5 in. (67.1 x 31.8cm)
• Upward-pivoting inner and outer transfer chamber doors counterbalanced and equipped with quick-latches
• Black, chemical-resistant phenolic core work surface sealed to glove box floor

Performance

• Dual HEPA filters boast 99.99% efficiency against particulates down to 0.3 microns
• 0.05ppm or lower average tracer gas levels detected during perimeter scan testing surpasses ASHRAE™ 110 standards
• Factory testing with mass spectrometer reveals no detectable leaks greater than 1 x 10^-3mL/sec. when tested while glove box is pressurized with helium at 1 in. water gauge
• Vibration is less than 1.5 x 10^-5 inches displacement when measured at work surface at both minimum and maximum airflow volumes

Order Info

• Overall dimensions: 31.62L x 52.75W x 40 in.H (80 x 134 x 102cm)
• Main chamber interior measures 27.5D x 33.5W x 25 in.H (69.9 x 85.1 x 63.5cm)
• Transfer chamber is 11 in. nominal I.D. x 12 in.L (28 x 30cm)
• Vibration isolator slab measures 20.38D x 13.38W x 2.85 in. thick
• Shipping weight: 350 lb. (159kg)

Certifications

ETL listed

Specifications

• Amperage: 8A
• Depth (English) Exterior: 31.6 in.
• Depth (Metric) Exterior: 80cm
• Electrical Requirements: 115V 60Hz
• For Use With (Application): Protects operator when working with hazardous samples
• Height (English) Interior: 25 in.
• Hertz: 60Hz
• Ports: 2
• Voltage: 115V
• Weight (Metric): 159kg
• Width (English) Interior: 33.5 in.
• Width (Metric) Interior: 85.09cm

• Certifications/Compliance: UL, ETL, CAN/CSA
• Depth (English) Interior: 27.5 in.
• Depth (Metric) Interior: 70cm
• Filter Type: HEPA
• Height (English) Exterior: 40 in.
• Height (Metric) Exterior: 102cm
• Liner Material: Polyethylene
• Type: Glove Box
• Weight (English): 350 lb.
• Width (English) Exterior: 52.7 in.
• Width (Metric) Exterior: 134cm