Thermo Scientific™ Lindberg/Blue M™ Vacuum Ovens

Benefit from a digital control, built-in over-temperature protection and a flexible vacuum/purge/release system for a range of applications with these ovens.

Manufacturer: Thermo Scientific™ VO 914A1

 View more versions of this product

Catalog No. 13-258-13

  Check Availability
Add to Cart


Ovens are not suitable for use with hazardous vapor. For use with nonflammable, noncorrosive inert gases only.


    Vacuum Range 1 x 10-2 torr (10 microns)
    Capacity 0.65 cu.ft., 18.6L
    Certifications/Compliance UL listed
    Dimensions (L x W x H) Exterior 23 x 18 x 26 in. (58 x 46 x 66cm)
    Capacity (English) 0.65 cu.ft.
    Chamber Material Corrosion-resistant stainless steel
    Depth (English) Interior 14 in.
    Display LED
    Height (English) Exterior 26 in.
    Height (English) Interior 9 in.
    Hertz 50/60Hz
    Ports Inert gas port, vacuum port and vent port
    Shelves 3
    Shipping Weight (Metric) 68kg
    Temperature Control Digital Microprocessor Control
    Temperature Resolution ±1°C
    Width (English) Exterior 18 in.
    Width (English) Interior 9 in.
    Width (Metric) Exterior 46cm
    Width (Metric) Interior 23cm
    Description 18.6L; 120V; 750w; Painted cabinet; 1 door, 3 shelves
    Dimensions (D x W x H) Interior 14 x 9 x 9 in. (36 x 23 x 23cm)
    Electrical Requirements 120V 50/60Hz
    Finish Painted Steel
    Item Description 18.6L; 120V; 750w; Painted cabinet; 1 door, 3 shelves
    Capacity (Metric) 18.6L
    Depth (Metric) Interior 36cm
    Height (Metric) Exterior 66cm
    Height (Metric) Interior 23cm
    Length (English) Exterior 23 in.,23 in.
    Length (Metric) Exterior 58cm,58cm
    Safety Features Overtemperature Safety System
    Shipping Weight (English) 150 lb.
    Temperature Range (Metric) 6° to 260°C
    Temperature Uniformity ±3.5°C
    Voltage 120V
    Wattage 750w

    Benefit from a digital control, built-in over-temperature protection and a flexible vacuum/purge/release system with Thermo Scientific™ Lindberg/Blue M™ Vacuum Ovens. These ovens work well with a range of applications including drying, curing, outgassing, aging, process control and other applications requiring elevated temperature in reduced atmospheres or vacuum/purge with nonflammable and inert atmospheres.

    Single-Setpoint Digital Microprocessor Control

    • Maximum temperature: 260°C (500°F) with nominal uniformity of ±3.5% of setpoint
    • Simultaneous LED display of setpoint and actual temperature with push-button view; resolution to within 1°C
    • Keypad data entry and pull-out control module for easy service
    • Independent overtemperature safety system factory set with reset pushbutton

    Vacuum System

    • 1in.(2.54cm) manifold, chamber rear, exterior, connects to pump or in-house vacuum source
    • With inert gas injection valve, fresh air inlet, vacuum exhaust port, controllable vacuum release vent port
    • 1000 microns (1 torr) capacity
    • Vacuum gauge, vacuum, gas and inlet valves located on front


    • Corrosion-resistant stainless-steel cabinet includes three aluminum shelves with painted or stainless-steel finish
    • Rear-mounted vacuum manifold connects to pump (not included) or in-house vacuum source
    • Low-watt heating element extends oven life
    • Heavy-gauge steel, dual-wall construction with fiberglass insulation for minimum heat loss in walls and door
    • High-temperature silicone gasket is specially molded for a positive seal
    • Magnetic latch for positive door seal (4.5 cu. ft. capacity models include mechanical latches)
    • Viewing windows: 0.5in.(1.3cm) thick in two smaller capacity models or 0.75in.(1.9cm) thick in 4.5 cu. ft. model; permit observation of work in progress without loss of heat
    • Stainless-steel exterior models come with double door—a solid outer door over inner window door


    Power cord and aluminum shelves (number of shelves based on model; see ordering table)

  • Description & Specifications

Related Products

Product Content Feedback

We continue to work to improve your shopping experience and your feedback regarding this content is very important to us. Please use the form below to provide feedback related to the content on this product.

Product Title

By clicking Submit, you acknowledge that you may be contacted by Fisher Scientific in regards to the feedback you have provided in this form. We will not share your information for any other purposes. All contact information provided shall also be maintained in accordance with our Privacy Policy.

Cancel Submit