Labconco™ RXPert™ Double Filtered Balance Systems

The patented RXPert Filtered Balance System is Class I Enclosure that meets USP <800> requirements for non-sterile compounding when ducted. Models feature 2 HEPA filters to provide redundant HEPA filtration in series and therefore require NO ductwork.

Catalog Number	Mfr. No.	Dimensions (D x W x H)	Includes	Weight (English)
10-305-023	Labconco™ 3971280	23.4 x 21.6 x 22.7 in. (59.4 x 54.8 x 57.6 cm)	–	269 lb.
10-305-024	Labconco™ 3971281	23.4 x 21.6 x 22.7 in. (59.4 x 54.8 x 57.6 cm)		344 lb.
10-305-025	Labconco™ 3971282	23.4 x 21.6 x 22.7 in. (59.4 x 54.8 x 57.6 cm)		364 lb.
10-305-026	Labconco™ 3971380	23.4 x 33.6 x 22.7 in. (59.4 x 85.3 x 57.6 cm)	–	327 lb.
10-305-027	Labconco™ 3971381	23.4 x 33.6 x 22.7 in. (59.4 x 85.3 x 57.6 cm)		401 lb.
10-305-028	Labconco™ 3971382	23.4 x 33.6 x 22.7 in. (59.4 x 85.3 x 57.6 cm)	Epoxy resin work surface	452 lb.
10-305-029	Labconco™ 3971480	23.4 x 45.6 x 22.7 in. (59.4 x 115.8 x 57.6 cm)	–	104 lb.
10-305-030	Labconco™ 3971481	23.4 x 45.6 x 22.7 in. (59.4 x 115.8 x 57.6 cm)		501 lb.
10-305-031	Labconco™ 3971482	23.4 x 45.6 x 22.7 in. (59.4 x 115.8 x 57.6 cm)		541 lb.
10-305-032	Labconco™ 3971485	23.4 x 45.6 x 32 in. (59.4 x 115.8 x 81.2 cm)	–	420 lb.
10-305-033	Labconco™ 3971486	23.4 x 45.6 x 32 in. (59.4 x 115.8 x 81.2 cm)		520 lb.
10-305-034	Labconco™ 3971487	23.4 x 45.6 x 32 in. (59.4 x 115.8 x 81.2 cm)		560 lb.
10-305-035	Labconco™ 3971490	30 x 45.6 x 32 in. (76.2 x 115.8 x 81.2 cm)	–	450 lb.
10-305-036	Labconco™ 3971491	30 x 45.6 x 32 in. (76.2 x 115.8 x 81.2 cm)		550 lb.
10-305-037	Labconco™ 3971492	30 x 45.6 x 32 in. (76.2 x 115.8 x 81.2 cm)		590 lb.
10-305-038	Labconco™ 3971585	23.4 x 57.6 x 32 in. (59.4 x 146.3 x 81.2 cm)	–	698 lb.
10-305-039	Labconco™ 3971586	23.4 x 57.6 x 32 in. (59.4 x 146.3 x 81.2 cm)		798 lb.
10-305-040	Labconco™ 3971587	23.4 x 57.6 x 32 in. (59.4 x 146.3 x 81.2 cm)		838 lb.
10-305-041	Labconco™ 3971590	30 x 57.6 x 32 in. (76.2 x 146.3 x 81.2 cm)	–	745 lb.
10-305-042	Labconco™ 3971591	30 x 57.6 x 32 in. (76.2 x 146.3 x 81.2 cm)		845 lb.
10-305-043	Labconco™ 3971592	30 x 57.6 x 32 in. (76.2 x 146.3 x 81.2 cm)		885 lb.
10-305-044	Labconco™ 3971685	23.4 x 69.6 x 32 in. (59.4 x 176.7 x 81.2 cm)	–	840 lb.
10-305-045	Labconco™ 3971686	23.4 x 69.6 x 32 in. (59.4 x 176.7 x 81.2 cm)		940 lb.
10-305-046	Labconco™ 3971687	23.4 x 69.6 x 32 in. (59.4 x 176.7 x 81.2 cm)		890 lb.
10-305-047	Labconco™ 3971690	30 x 69.6 x 32 in. (76.2 x 176.7 x 81.2 cm)	–	892 lb.
10-305-048	Labconco™ 3971691	30 x 69.6 x 32 in. (76.2 x 176.7 x 81.2 cm)		992 lb.
10-305-049	Labconco™ 3971692	30 x 69.6 x 32 in. (76.2 x 176.7 x 81.2 cm)		1032 lb.

Description

• Quiet operation
• HEPA Filtered Enclosure for powder weighing
• Two redundant filters
• Each HEPA filter 100% independently leak-detection scannable without removing impellers or filters
• Bag-in/bag-out HEPA filter for protection during filter changes
• Glass and steel construction
• Ergonomic air foil with aerodynamic patented Clean-Sweep airflow openings
• Guardian airflow monitor that continuously monitors airflow with visable and audible alarms when airflow is outside set point range
• Upper dilution air supply and upper containment sash foil
• Zone-perforated, pivoting rear baffle
• Side-entry air foils
• Intrinsically safe, negative pressure design
• Built-in blower with dynamically-balanced, vibration-isolated motorized impeller and speed control
• Blower has a 40% reserve so that speed may be adjusted as needed by certified technician as filter loads
• Two exhaust HEPA filters, 99.99% efficient on particles 0.3 micron in size
• Pressure gauge
• Two utility ports with iris openings
• Tempered safety glass 6.35mm (0.25 in.) thick front sash and sides
• Ergonomic angled and hinged, pivoting sash with wiping seal

Specifications

• Product Type: Balance Enclosure
• Certifications/Compliance: Certifications: ANSI Z9.5, CAN/CSA C22.2, Modified ASHRAE 110, SEFA 1, UL 61010
• Voltage: 115 V

• Lighting Type: Fluorescent
• Hertz: 60 Hz