Dataloggers and Recorders
Dataloggers and Recorders
Fisherbrand™ TraceableLIVE™ Ultra-Low Temperature WiFi Datalogging Thermometer with Remote Notification
Now with FREE TraceableLIVE subscription plan (for one user)! A simple, efficient, and reliable way to stay connected to your critical environments with smartphone, tablet or personal computer.
|Product Type||WiFi Datalogging Refrigerator/Freezer Thermometer|
|For Use With (Application)||Remotely monitor temperature|
|Temperature Range (Metric)||-90.00 to 105.00°C or -130.00 to 221.00°F|
Fisherbrand™ Traceable™ 100-Hr Four-Channel Timer is a lab workhorse provides 100 hour timing on four channels.
Fisherbrand™ TraceableLIVE™ Wi-Fi Datalogging Refrigerator/Freezer Thermometers with Remote Notification
Now with FREE TraceableLIVE subscription plan (for one user)! The simple, efficient, and reliable way to stay connected to critical environments through a smart phone, tablet, or personal computer.
|Temperature Range (Metric)||-50 to 60°C|
|Accuracy (Temperature)||±0.25°C between -40 to 60°C, otherwise ±0.50°C|
Monitor temperatures in refrigerators, freezers, water baths, heating blocks and incubators with this datalogging thermometer. Traceable™ Excursion-Trac™ Datalogging Thermometers have a temperature range of -50 to 70°C and resolution of 0.01 and maintain an accuracy of ±0.25°C across the entire temperature range.
|Product Type||Datalogging Thermometer|
|Length (English)||Cable: 10 ft.|
|Certifications/Compliance||ISO 17025, A2LA, NIST|
|Temperature Range (Metric)||-50.00° to 70.00°C (-58.00° to 158.00°F)|
Allows data to be streamed directly to laptops, tablets, smart phones.
Accurately measures voltage of electronic circuits using two banana plugs, included with sensor.
Inexpensive data collection direct to any TI-Nspire handheld or TI-84 Plus graphing calculator.
The Oxidation-Reduction Potential (ORP) Sensor measures the ability of a solution to act as an oxidizing or reducing agent. Use the ORP Sensor to measure the oxidizing ability of chlorine in swimming pools or to determine when the equivalence point has been reached in an oxidation-reduction reaction.
Most of our sensors have cables that are 1.5 m long. There are times, however, that you may wish to have a longer cable. The Digital Sensor Extension Cable can be used with any Vernier sensor that connects to a digital channel of LabPro, CBL 2, or CBL, such as Motion Detectors and Photogates. Each cable is 2 meters in length.
A plastic cuvette rack for holding up to 10 cuvettes during experiments.
The PAR (Photosynthetically Active Radiation) Sensor reports the Photosynthetic Photon Flux Density (PPFD), which corresponds to micromoles of photons per meter squared per second (μmol m-2 s-1).
The Projectile Stop has one job–to keep the projectiles from the Vernier Projectile Launcher from rolling out of sight. Place the Projectile Stop in the launch line, beyond the landing site, and the projectile will be caught. The Projectile Stop is heavy foam-coated steel that stays where you put it.
This 35 ppt standard is used to calibrate the Salinity Sensor. (500 mL)
The Pyranometer measures the power of electromagnetic radiation in watts per square meter. It is sensitive to near infrared, visible, and UV radiation, where 90% of solar energy is concentrated.
Use the Power Amplifier as a power supply for DC and ACcircuit investigations or to drive devices such as speakers, lamps, and small DC motors.
Replacement power supply for the LabQuest, LabQuest 2, and LabQuest Mini.
The Eisco™ NeuLog™ Geiger Counter Logger Sensor measures all three types of radiation: Alpha, Beta, and Gamma. The radioactivity of a sample can be measured by counting how many ionizing events occurred in a period of time or as rate (counts per second, for example).
The Eisco™ NeuLog™ Panda WIFI module enables the PANDA to connect to PC/ Mac without the use of a USB Cable.
Allows students to easily measure pH of pure chemicals and dynamic chemical reactions.
Helps explore properties of gas and incorporate hands-on digital data collection.
Allows students to collect, analyze data directly onto Eisco Sensors Base Unit while on move.
The Eisco™ NeuLog™ Panda is a multi-sensor module with 9 built-in sensors. It is ideal for younger scientists and students that wish to seamlessly and easily collect data.
Expand the NeuLog Sense bot to the world of DIY Arduino using this adaptor which allows integration of Arduino sets and boards with the Sense bot. It is recommended that this module be used with the Sense Bot as well as the CARM202 module so that you can program in the C language.
Allow SENSE to monitor and change its environment with the Servo Gripper Module featuring 2 servomotors, one to move the gripper up and down, the other to open and close. With block programming it is easy to operate the gripper with commands within the block code. Can be used with NeuLog sensors.
A new extended capacity battery to support NeuLog products that is more powerful than the last. It has a power rating of 2,300 mAh. The battery comes with a micro to USB cable to recharge and can be used to power all NeuLog sensors and devices including the NeuLog Sense bot.
NeuLog SENSE infrared tracking unit is used to locate the SENSE infrared transmitter's signals to determine its direction relative to the sensor. Great for coding robots to follow IR signals or build follow-chase scenarios with multiple SENSE bots.
The NeuLog Sense Wireless Communication Module allows the SENSE bot to connect to any tablet or smart device without the need for an application. The user connects to the hotspot created by WIFI203 and then runs the device using a browser.
Connect up to 5 Neulog™ sensors to an iPhone, Droid, PC, Mac, or Chromebook device using Bluetooth or USB connectivity