Thermo Scientific™ PEEK Fingertight Fittings
Ensure HPLC quality and robustness with Thermo Scientific™ PEEK Fingertight Fittings.
Thermo Scientific™ 11mm Autosampler Vial Snap Caps
11mm Wide Opening Snap-It Caps and Septa are easy to apply and easy to remove and fully compatible with all Snap-It vials.
Thermo Scientific™ 8mm Assembled Amber Autosampler Vial Kits
Save time and reduce the risk of contamination using this convenience kit. It includes 100 amber vials pre-assembled with 100 screw thread caps and septa.
Thermo Scientific™ ProSwift™ WCX-1S LC Columns
For fast, high-resolution separation and purification of proteins by ion-exchange using the carboxylic acid stationary phase, use Thermo Scientific™ ProSwift™ SCX-1S LC Columns.
Thermo Scientific™ Pre-cut PEEK Tubing in a 5-foot Coil
Thermo Scientific™ Pre-cut PEEK Tubing in a 5-foot Coil is easily cut to the desired length.
Thermo Scientific™ ProPac™ SAX-10 LC Columns
Use ProPac™ SAX-10 LC Columns for exceptionally high resolution and efficiency when separating protein variants.
Thermo Scientific™ ProPac™ WCX-10 LC Columns
Separate proteins and their variants using these weak cation-exchange columns with exceptionally high resolution.
Thermo Scientific™ BioBasic™ SEC 300 LC Columns
Outstanding size separation of water soluble compounds.
Water with 0.1% Trifluoroacetic Acid (v/v), Optima™ LC/MSGrade, Fisher Chemical
Aluminum (Al): 20 ppb max. Assay Percent Range: 99.0 to 103.0 % Calcium (Ca): 50 ppb max. CAS: 76-05-1 CAS: 76-05-1 Chemical Name or Material: 0.1% Trifluoroacetic Acid in Water (v/v) Copper (Cu): 10 ppb max. Assay: 0.095 to 0.105% (v/v) Trifluoroacetic Acid Color: Clear Physical Form: Liquid Purity Grade: Optima™ LC/MS Health Hazard 2: CAUTION! Health Hazard 3: Emergency Overview
May cause eye, skin, and respiratory tract irritation. Use personal protective equipment. Ensure adequate ventilation. Wash off immediately with plenty of water for at least 15 minutes. Get medical attention immediately if symptoms occur. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Obtain medical attention. Move to fresh air. If breathing is difficult, give oxygen. Get medical attention immediately if symptoms occur. Do not induce vomiting. Obtain medical attention. Obtain medical attention. .
Instability:0 Identification: Pass Test Impurities: ≤20ppb (Ionic, Potassium) Iron (Fe): 10 ppb max. LCMS Gradient Suitability: Pass Test Lead (Pb): 10 ppb max. Magnesium (Mg): 10 ppb max. Manganese (Mn): 10 ppb max. Merck Index: 15, 9847 MDL Number: 4169 Molecular Formula: C2HF3O2 Name Note: Solvent Blends Nickel (Ni): 10 ppb max. Packaging: Glass Bottle Potassium (K): 20 ppb max. Protease: Protease free Residue after Evaporation: ≤1ppm Silver (Ag): 10 ppb max. Sodium (Na): 50 ppb max. Trifluoroacetic Acid: Inclusive between 0.095% Zinc (Zn): 20 ppb max.
Thermo Scientific™ MAbPac™ SCX-10 LC Columns
Use these strong cation-exchange columns for high-resolution, high efficiency analysis of monoclonal antibodies (mAbs) and associated variants.
Thermo Scientific™ Hypersil™ ODS C18 Columns
Choose Thermo Scientific™ Hypersil™ ODS C18 HPLC Columns for a general purpose C18 phase to use in a broad range of applications.
Thermo Scientific™ 10mm Autosampler Vial Screw Thread Caps
10mm Wide Opening Screw Caps and Septa feature a 10-425 thread finish and are available in an assortment of styles to match your application needs.
Thermo Scientific™ Pierce™ Trifluoracetic Acid (TFA)
Bottles of 99.5%-pure TFA (MW 114.02, CAS 76-05-01) liquid (sold by weight); for HPLC use as an ion-pairing agent in reverse-phase peptide separations.
Thermo Scientific™ ProSwift™ RP-1S LC Columns
Run protein separations at high flow rates with Thermo Scientific™ ProSwift™ RP-1S LC Columns.
Water (HPLC), Fisher Chemical
Chemical Name or Material: Water CAS: 7732-18-5 Purity Grade: HPLC Grade Purity Grade Notes: Mobile phase for HPLC applications Physical Form: Liquid Molecular Formula: H2O Formula Weight: 18.02 MDL Number: MFCD00011332
Thermo Scientific™ Pierce™ Formic Acid
A high-purity solvent supplied in glass ampules as a convenient, contamination-free alternative for preparing elution solvents for HPLC separations of protein and peptides.
Thermo Scientific™ Acclaim™ Polar Advantage II LC Columns
Resolve polar and nonpolar compounds in a single run with these enhanced hydrolytic stabile (pH 1.5–10) Thermo Scientific™ Acclaim™ PolarAdvantage II reversed-phase columns.
Thermo Scientific™ TraceGOLD TG-1301MS GC Columns
Provides low bleed, excellent reproducibility and column-to-column consistency even with sensitive detectors like ECDs and MS.
Thermo Scientific™ 10mm Plastic Screw Thread Autosampler Vials
Choose from these chemically inert 10mm polypropylene vials that are suitable for most chromatography applications.
Thermo Scientific™ ProPac™ SCX-10 LC Columns
Separate protein variants in difficult matrices using ProPac SCX-10 LC Columns, which provide exceptionally high resolution.
Thermo Scientific™ 9mm Autosampler Vial Screw Thread Caps
Prevent septa push through and over- and under-tightening. With AVCS built into these 9mm screw caps you will get an optimal, consistent seal every time.
Thermo Scientific™ Pierce™ Acetonitrile (ACN), LC/MS Grade
Perform HPLC and mass spectrometry applications with this LC/MS-grade acetonitrile preparation with high purity and low UV-absorptivity.
Thermo Scientific™ Acclaim™ Guard Kits
Thermo Scientific™ Acclaim™ Guard Kits each include a holder and a coupler.
Thermo Scientific™ DNAPac™ PA100 Oligonucleotide Columns
Features strong anion-exchange resin for high-resolution analysis and purification of synthetic and modified oligonucleotides.
Thermo Scientific™ Storage Vials & Closures
Store your samples in these vials to eliminate leaching of ions while maintaining a consistent pH for the life of your sample. Storage vials range from 2mL to 40mL.
Thermo Scientific™ Silylation Grade Solvents
Use specially manufactured and packaged Thermo Scientific™ Silylation Grade Solvents to meet the exacting needs of silylation and other sensitive derivatization reactions.
Thermo Scientific™ HyperSep™ C18 Cartridges
Get improved retention for most nonpolar compounds and organic analytes in aqueous matrices with these hydrophobic reversed phase C18 cartridges.
Water, Optima™ LC/MSGrade, Fisher Chemical
Aluminum (Al): 10 ppb max. Barium (Ba): 10 ppb max. Cadmium (Cd): 10 ppb max. Calcium (Ca): 20 ppb max. CAS: 7732-18-5 Certificate of Analysis: Actual Lot Analysis reported on label; Certificate of Actual Lot Analysis available on request Chemical Name or Material: Water Chromium (Cr): 10 ppb max. Cobalt (Co): 10 ppb max. Copper (Cu): 10 ppb max. Density: 1.000g/cm³ Boiling Point: 100°C Color: Colorless Formula Weight: 18.02 Melting Point: 0°C pH: 7 Physical Form: Liquid Purity Grade: Optima™ LC/MS Filtered Through: 0.03 micron filtered. Halogens: Not Detected Health Hazard 2: Low hazard for usual industrial or commercial handling. Health Hazard 3: Emergency Overview
Handle in accordance with good industrial hygiene and safety practice. Flush eyes with water as a precaution. Move to fresh air. If breathing is difficult, give oxygen. Do not induce vomiting. Obtain medical attention.
Instability: 0 Impurities: ≤10ppb (Ionic, Potassium) Iron (Fe): 10 ppb max. LCMS at Negative Mode as Aldicarb: 50 ppb max. LCMS at Positive Mode as Reserpine: 50 ppb max. LCMS Gradient Suitability: ≤2 mAU - PDA (200-400nm) LCMS Negative Mode as Mecoprop: ≤300ppb LCMS Positive Mode as Propazine: ≤50ppb Lead (Pb): 10 ppb max. Magnesium (Mg): 10 ppb max. Manganese (Mn): 10 ppb max. Merck Index: 15, 10237 MDL Number: 11332 Molecular Formula: H2O Nickel (Ni): 10 ppb max. Packaging: Glass Bottle Physical State: Liquid Potassium (K): 10 ppb max. Protease: Protease free Purity Grade Notes: Formulated for UHPLC-UV Residue after Evaporation: ≤1ppm Silver (Ag): 10 ppb max. Sodium (Na): 20 ppb max. Tin (Sn): 10 ppb max. Vapor Pressure: 17.5mmHg at 20°C Zinc (Zn): 10 ppb max.
Thermo Scientific™ PEEK Capillary Tubing
Use these sample loops for your Thermo Scientific™ Rheodyne™ HPLC sample injectors.
Thermo Scientific™ 9mm Autosampler Inserts
Clear glass or polypropylene inserts for 9mm HPLC and GC autosampler vials are available in a variety of configurations with usable volumes from 160μL to 3.5mL.