CO2 Incubators
Thermo Scientific™ Vios™ iDx 255 L CO2 Incubators
Proven protection for your sensitive cell culture, with in-chamber sensors, HEPA filtration, Steri-Run™ high temperature sterilization, THRIVE active airflow, and an integrated, protected humidity reservoir. Available with 100% Copper or Electropolished SS interiors, and TC or IR Sensors.
Thermo Scientific™ VIOS 160i Adaptor
Adaptor for stacking VIOS 160i
Thermo Scientific™ Forma™ Steri-Cult™ CO2 Incubator, 232L & 323L, CTS™ Series
Carry out high-volume culturing with a high-level of contamination control with these stackable Thermo Scientific Forma Steri-Cult CO2 Incubators - CTS Series, complete with documentation and validation to support GMP production needs
Binder Inc CO2 incubator CBF170UL-120V
BINDER CO2 incubator CBF170UL-120V, with active humidification, Series CBF - CO2 incubators with hot air sterilization and humidity regulation, 6 cu.ft, 120 V 1~ 50/60 Hz
Important characteristics:
- Contamination-safe humidification system without water pan
- Tried-and-tested anti-contamination concept with 180 °C hot air sterilization
- Hot-air sterilizable CO₂ sensor with single-beam infrared technology
- Seamless inner chamber made of stainless steel with flanges as shelf support system
- Fanless interior with Venturi CO₂ gas mixing nozzle
- Intuitive touchscreen controller
- Internal data logger, measured values can be read out in open format via USB
- Troubleshooting system with visual and acoustic alarms
- Interfaces: Ethernet, USB, zero-voltage alarm contact
- Fail-safe CO₂ system for protecting the pH of cell cultures
Eppendorf 3P CellXpert C170i, non-segmented inner door, handle right side, 100 – 127 V/50 – 60 Hz (US/JP/South America)
CellXpert C170i, non-segmented inner door, handle right side, 100 – 127 V/50 – 60 Hz (US/JP/South America)
Eppendorf 3P CellXpert C170i, non-segmented inner door, handle right side, water-level monitoring, 100 – 127 V/50 – 60 Hz (US/JP/South America)
CellXpert C170i, non-segmented inner door, handle right side, water-level monitoring, 100 – 127 V/50 – 60 Hz (US/JP/South America)
Thermo Scientific Stacking Adapter For two 165L models
Thermo Scientific Stacking Adapter For two 165L models
Binder Inc CO2 incubator CB170UL-120V
BINDER CO2 incubator CB170UL-120V, Standard, Series CB - CO2 incubators with hot air sterilization and heat sterilizable CO2 sensor, 6 cu.ft, 120 V 1~ 50/60 Hz
Important characteristics:
- Optimized double-pan humidification system with condensation protection
- Tried-and-tested anti-contamination concept with 180 °C hot air sterilization
- Hot-air sterilizable CO₂ sensor with single-beam infrared technology
- Seamless inner chamber made of stainless steel with flanges as shelf support system
- Fanless interior with Venturi CO₂ gas mixing nozzle
- Intuitive touchscreen controller
- Internal data recording, can be read out in open format via USB interface
- Fault diagnosis system with visual and acoustic alarm
- Interfaces: Ethernet, USB, zero-voltage alarm contact
- Fail-safe CO₂ system for protecting the pH of cell cultures
Binder Inc CO2 incubator CBF170UL-120V-O
BINDER CO2 incubator CBF170UL-120V-O, with O2 control 0.2–20% and active humidification, Series CBF - CO2 incubators with hot air sterilization and humidity regulation, 6 cu.ft, 120 V 1~ 50/60 Hz
Important characteristics:
- Contamination-safe humidification system without water pan
- Tried-and-tested anti-contamination concept with 180 °C hot air sterilization
- Hot-air sterilizable CO₂ sensor with single-beam infrared technology
- Seamless inner chamber made of stainless steel with flanges as shelf support system
- Fanless interior with Venturi CO₂ gas mixing nozzle
- Intuitive touchscreen controller
- Internal data logger, measured values can be read out in open format via USB
- Troubleshooting system with visual and acoustic alarms
- Interfaces: Ethernet, USB, zero-voltage alarm contact
- Fail-safe CO₂ system for protecting the pH of cell cultures
Binder Inc CO2 incubator CB260UL-120V
BINDER CO2 incubator CB260UL-120V, Standard, Series CB - CO2 incubators with hot air sterilization and heat sterilizable CO2 sensor, 10 cu.ft, 120 V 1~ 50/60 Hz
Important characteristics:
- Optimized double-pan humidification system with condensation protection
- Tried-and-tested anti-contamination concept with 180 °C hot air sterilization
- Hot-air sterilizable CO₂ sensor with single-beam infrared technology
- Seamless inner chamber made of stainless steel with flanges as shelf support system
- Fanless interior with Venturi CO₂ gas mixing nozzle
- Intuitive touchscreen controller
- Internal data recording, can be read out in open format via USB interface
- Fault diagnosis system with visual and acoustic alarm
- Interfaces: Ethernet, USB, zero-voltage alarm contact
- Fail-safe CO₂ system for protecting the pH of cell cultures
Binder Inc CO2 incubator CB056UL-120V
BINDER CO2 incubator CB056UL-120V, Standard, Series CB - CO2 incubators with hot air sterilization and heat sterilizable CO2 sensor, 2 cu.ft., 120 V 1~ 50/60 Hz
Important characteristics:
- Optimized humidification system with condensation protection
- Tried-and-tested anti-contamination concept with 180 °C hot air sterilization
- Hot-air sterilizable CO₂ sensor with single-beam infrared technology
- Seamless inner chamber made of stainless steel with flanges as shelf support system
- Fanless interior with Venturi CO₂ gas mixing nozzle
- Intuitive touchscreen controller
- Internal data recording, can be read out in open format via USB interface
- Fault diagnosis system with visual and acoustic alarm
- Interfaces: Ethernet, USB, zero-voltage alarm contact
- Fail-safe CO₂ system for protecting the pH of cell cultures
Binder Inc CO2 incubator CBS170UL-120V
BINDER CO2 incubator CBS170UL-120V, Series CB-S Solid.Line - CO2 incubators with hot air sterilization, 6 cu.ft, 120 V 1~ 50/60 Hz
Important characteristics:
- Tried-and-tested anti-contamination concept with 180 °C hot air sterilization
- Humidification system with condensation protection
- CO₂ gas mixing jet with Venturi effect
- CO₂ sensor with infrared technology
- LCD to display temperature and CO₂ along with additional information and alarms
- Internal data logger, measured values can be read out in open format via USB
- Tightly fitted inner door made of safety glass
- Seamless stainless steel inner chamber
- Perforated shelves, stainless steel
- Troubleshooting system with visual and acoustic alarms
- Interfaces: Ethernet, USB, zero-voltage alarm contact
Binder Inc CO2 incubator CB260UL-120V-O
BINDER CO2 incubator CB260UL-120V-O, with O2 control 0.2–20%, Series CB - CO2 incubators with hot air sterilization and heat sterilizable CO2 sensor, 10 cu.ft, 120 V 1~ 50/60 Hz
Important characteristics:
- Optimized double-pan humidification system with condensation protection
- Tried-and-tested anti-contamination concept with 180 °C hot air sterilization
- Hot-air sterilizable CO₂ sensor with single-beam infrared technology
- Seamless inner chamber made of stainless steel with flanges as shelf support system
- Fanless interior with Venturi CO₂ gas mixing nozzle
- Intuitive touchscreen controller
- Internal data recording, can be read out in open format via USB interface
- Fault diagnosis system with visual and acoustic alarm
- Interfaces: Ethernet, USB, zero-voltage alarm contact
- Fail-safe CO₂ system for protecting the pH of cell cultures
Binder Inc Quick sample access
Quick sample access - vewing window (13 x 25 cm) in the inner door for quick access