Dry Block Incubators
Cole-Parmer Techne Dri-Block Digital Block Heater, Triple Insert, RS-232 output; 230 VAC
Use these heaters as a dry, constant temperature source for various lab and research applications. All models have independent indicator lights to show main power, heater action, and over-temperature cut out. The "number of blocks accepted" on the ordering table indicate the number of single-width blocks accepted by each block heater. A heater that accepts two single-width blocks will accept one double-width block. Use three- and four-block models for high-throughput applications such as chemical oxygen demand (COD).
Cole-Parmer Techne Dri-Block Aluminum Heating Block Insert, 6 X 26 mm diameter
Interchangeable aluminum heating blocks provide excellent thermal conductivity and accommodate various test tubes, cups, and plates. Depending on the combination of blocks selected, plastic spacers (36620-67) can be used to fill a half-width recess, ensuring optimal thermal performance. Most blocks come with a separate hole to accept a thermometer. Order a flexi-block to accommodate multiple size tubes, vials, or cuvettes at once. Unskirted PCR plates can be heated in either size flexi-block. Skirted microtiter plates, deep-well plates, and PCR plates can only be incubated in the triple-width version.
Cole-Parmer Techne Dri-Block Aluminum Heating Block Insert, 20 x 12 mm diameter, conical
Interchangeable aluminum heating blocks provide excellent thermal conductivity and accommodate various test tubes, cups, and plates. Depending on the combination of blocks selected, plastic spacers (36620-67) can be used to fill a half-width recess, ensuring optimal thermal performance. Most blocks come with a separate hole to accept a thermometer. Order a flexi-block to accommodate multiple size tubes, vials, or cuvettes at once. Unskirted PCR plates can be heated in either size flexi-block. Skirted microtiter plates, deep-well plates, and PCR plates can only be incubated in the triple-width version.
MSC SPI V-Block, 1-5/16 inch Capacity, 90 Degree V-Angle, Steel, With Clamp
This precision V-block with clamp set is designed for holding round stock securely during various machining, inspection, and layout tasks. Constructed from hardened steel, it features a 90-degree V-angle and a maximum capacity of 1-5/16 inches, making it suitable for a range of applications. Its multi-surface design and mounting capabilities enhance versatility in a workshop environment.
- Precision ground on all surfaces, ensuring high accuracy.
- Permits any of its ground surfaces to be used as a datum.
- Includes four tapped holes (3/8-16) for easy mounting on other workholders.
- Features a through-hole in the largest V for convenient removal of dowel pins.
- Forged clamp is recessed, preventing interference during use.
- Constructed from durable steel for long-lasting performance.
GENESEE SCIENTIFIC CORPORATION CUSTOM BLOCK FOR THE 4ML VIALS
NC3584858 CUSTOM BLOCK FOR THE 4ML VIALS
Cole-Parmer Fluke Calibration 3102-3 Insert for low-temperature calibrator, 3/16" diameter
One of various parts and accessories to change capacity, testing type, accuracy or portability for your Fluke Calibration calibrator.
Braintree Scientific MyBlock Mini Digital Dry Bath w/heated lid, blocks sold sep.
The MyBlock™ HL is the first and only mini heat block featuring a heated lid for protecting samples against unwanted condensation and evaporation. Both the block and lid temperature can be selected independently in increments of .1C, making this MyBlock the ideal choice for the most temperature sensitive applications, including immunoassays, LAMP assays, enzyme reactions and other temperature hyper-sensitive procedures. Heated lid prevents evaporation and condensation. Compact, fits in the palm of user's hand. Independant temperature control of lid and block. Exchangeable blocks for 0.2 to 0.5ml tubes. Room temperature to 37C in just 2 minutes. Specifications: Temperature range: Ambient +5 to 100C; Temperature accuracy: .3C; Temperature increments: .1C; Temperature uniformity: .2C; Dimensions: 4" x 6" x 4.5"/10.5cm x 15cm x 11.5cm. **Sold for research purposes only and not for human use**
Cole-Parmer Techne 3028950 Portable Dry Block Calibrator, 240VAC
- Wide temperature range
Independent over temperature cutout - Maximum temperature of 430C/806F
- Built rugged for portable field use
- Fast heat up and cool down
- 10 insert formats available
- Temperature sensor burnout protection
- Lightweight, only 9 lbs
- Low cost
Sigma Aldrich Fine Chemicals Biosciences FLAT COLD BLOCK FOR PLATE
NC3761382 FLAT COLD BLOCK FOR PLATE