Bath Accessories
Cole-Parmer Polystat Chiller w/ Immersion Probe, -35 to 40 C, 115V/60Hz
All models are designed to run at maximum cooling rate.
Accuflow Systems Saint-Gobain Sani-Tech Silicone Hose, 0.75 in ID, Braid Reinforced
Saint-Gobain Sani-Tech STHT-R braid-reinforced, platinum-cured silicone hose designed for higher-pressure bioprocess and fluid-transfer applications.
- Platinum-cured silicone construction.
- Braid-reinforced for higher working pressure.
- Inner diameter 0.750 in (19.05 mm).
- Outer diameter 1.125 in (28.58 mm).
- Wall thickness 0.187 in (4.75 mm).
- Recommended working pressure 105 psi at 68°F (20°C).
- Temperature range -80°F to 500°F (-62°C to 260°C).
- Available in 25 ft or 50 ft lengths; commonly supplied in 50 ft.
- Meets USP Class VI, European Pharmacopeia 3.1.9, and FDA criteria.
- Resists autoclaving, ozone, radiation, moisture, and chemical attack.
Cole-Parmer Polystat low-temperature immersion chiller; flex probe; 120V
Quickly cool the contents of your bath with these immersion chillers. Digital display of bath temperature with 0.1°C resolution, and a 100Ω platinum RTD sensor for increased temperature stability. RTD temperature sensor includes a 6"L x 1/8" diameter stainless steel sheath and a 5-ft (1.5-m) cable. Probe can be inserted into your bath at ambient temperature—there’s no need to wait until your bath reaches subzero temperatures. A generous 60" of insulated tubing (11/2" OD) is between the probe and the cabinet.
Clearco Products Co Inc High Temperature Silicone Bath Fluid, 1 Gallon
DPDM-400 HIGH TEMPERATURE BATH FLUID is a clear, colorless and odorless Diphenyl-Dimethylsiloxane (CAS# 68083-14-7) with a viscosity of 400cSt. It remains stable at 250°C (open system) for 1,500 to 2,000 hours without gelling or breaking down. In closed system baths*, DPDM-400 HIGH TEMPERATURE BATH FLUID remains stable at 300°C.
Chemglass Life Sciences 16L Lab Armor Beads, Shipped in (4) 4L Containers
These dry metallic beads replace water in water baths, aluminum blocks in dry baths, ice in ice buckets, and give old equipment a cool, shiny, state-of-the-art look while maintaining temperatures of -20 ° C to 8 ° C for 4 or more hours. Open sources of water in the lab can put the lab at risk if incubating and spreading biological or chemical contamination between samples, equipment and people. Unknown biological and chemical contamination in water can readily enter your incubating samples resulting in distorted data and non-reproducible results. Lab Armor bead technology will save you countless hours of reworking ruined experiments and eliminate cleaning. Lab Armor Beads extend the life of your bath by eliminating corrosion and reducing burn-out risk. For best performance, use product at an operating temperature of -80 to 180 ° C. However, product may be used up to 300 ° C without loss in thermal performance, but product fluidity may be reduced. Please contact technical services for s
Thomas Scientific Staticmaster Ionizing Cartridge
Static Eliminator Duostat For neutralization of static charge on balances, optics, films, etc. Strength 500 µCi; effective range approximately 40 mm No state or USNRC-specific license is required to purchase or possess this unit. Effective life span is one year. Spent unit may be mailed to the manufacturer for proper disposal. Unit can be placed in or near the item to be neutralized or can be mounted on 3620A50 (1 each of 3620A30 must be purchased to use 3620A50 Single Unit Positioner, A30 Ionizing Units may be used without positioner). Stand of stainless steel with flexible gooseneck arm and maximum height of 15”. Stainless steel housing 3” x 1” x 1/4” high, with mounting tabs. Instantly solves the problem created by static when weighing filters; increases accuracy and repeatability Just one passage through the unit offers reliable, repeatable weighings Portable and easy positioning, requires a minimum amount of bench space. Staticmaster Ionizing Car
Chemglass Life Sciences 0.75L Lab Armor Beads
0.75L Lab Armor Beads. These dry metallic beads replace water in water baths, aluminum blocks in dry baths, ice in ice buckets, and give old equipment a cool, shiny, state-of-the-art look while maintaining temperatures of -20C to 8C for 4 or more hours. Open sources of water in the lab can put the lab at risk if incubating and spreading biological or chemical contamination between samples, equipment and people. Unknown biological and chemical contamination in water can readily enter your incubating samples resulting in distorted data and non-reproducible results. Lab Armor bead technology will save you countless hours of reworking ruined experiments and eliminate cleaning. Lab Armor Beads extend the life of your bath by eliminating corrosion and reducing burn-out risk. For best performance, use product at an operating temperature of -80 to 180C. Product may be used up to 300C without loss in thermal performance, but product fluidity may be reduced.
Julabo USA Inc 1.5m M24 x 1.5 vacuum tubing
JULABO vacuum-insulated metal tubing is the ideal accessory for high and low-temperature applications including those powered by our PRESTO systems and Ultralow Chillers Temperature range of -100C to 400C Tubing from 0 5m to 5m lengths with M-threaded female fittings The insulated tubing prevents frost build-up and maintains optimal cooling capacity This tubing also increases energy efficiency decreases heat loss and provides better temperature accuracy for faster processing The flexible tubing makes connecting the application to the temperature control unit easy and hassle-free Cleanroom-compatible materials (316L SS) with low spring back that reduces stress on connections and joints Maintains a safer external surface temperature minimizing heat loss Includes one year warranty from ship date