Bath Accessories
Across International 350C 2000RPM 1-Gallon PID Magnetic Stirrer with 7" Heated Plate
A magnetic stirrer or magnetic mixer is a laboratory device that employs a rotating magnetic field to cause a stir bar (also called "flea") immersed in a liquid to spin very quickly, thus stirring it. The rotating field may be created either by a rotating magnet or a set of stationary electromagnets, placed beneath the vessel with the liquid. Since glass does not affect a magnetic field appreciably (it is transparent to magnetism), and most chemical reactions take place in glass vessels (i.e. see beaker (glassware) or laboratory flasks), magnetic stir bars work well in glass vessels. On the other hand, the limited size of the bar means that magnetic stirrers can only be used for relatively small experiments. They also have difficulty dealing with viscous liquids or thick suspensions. For larger volumes or more viscous liquids, some sort of mechanical stirring is typically needed.
Ace Glass, Inc. 1/2gal high temperature silicone based bath oil
An extremely stable, medium viscosity, silicone oil. Temperature range High Temp. maximum 230 degree C. Oil shows no discoloration after 40 hours at maximum temperature. Qty 0.5 Gallon
Ace Glass, Inc. 1qt high temperature silicone based bath oil
An extremely stable, medium viscosity, silicone oil. Temperature range: High Temp. maximum 230 degree C. Oil shows no discoloration after 40 hours at maximum temperature.
Alkali Scientific 8 Liter Lab Armor Metal Beads for Bead Bath
8 Liter Lab Armor Metal Beads have a metal composition, are moisture and gas impermeable. They have high thermal conductivity, and a smooth, rounded surface. The working temperature range is -80°C to 180°C. They improve energy efficiency of standard water baths by over 50%.
Julabo USA Inc Pt100 sensor, 36" x 1/4", stainless steel, 12' cable with Lemosa connector
Pt100 temperature sensor, stainless steel; 36" long x 1/4" OD with 12' cable and 4-pin Lemosa connector. For use with any JULABO circulator having external Pt100 sensor capability. Shielded cable.
Cole-Parmer Metallic Bath Beads for Dry Baths; 4-Liters
Hold containers in place at any angle without any float-away or ruined samples. High thermal conductivity 180C. Versatile enough for freezers, ovens and incubators. Smooth, rounded surfaces measure 5 to 8 mm diameter and 1 to 2 mm high. Beads are moisture and gas impermeable and are easy to keep clean without harmful germicides. These versatile beads can also be used in a container for freezer, ovens and incubators.
Research Products International Corp Armor Beads, Heat Block Upgrade, 0.75L
Lab Armor Beads are a revolutionary modern day concept for replacing water in baths, ice in ice buckets and aluminum blocks in dry block incubators. These unique thermal technology beads have a broad temperature range of -80°C to 180°C. Lab Armor Beads can also be used to replace aluminum blocks in dry block heaters. Help to maintain a clean and green environment in the laboratory. Improves energy efficiency of standard water baths by over 50%.
Stays Clean - Protected from water-borne contamination
Stays Organized - No more water accidents
Saves Time - Always on and ready to use
Eco-Friendly - Highly recyclable beads, fewer harmful biocides and more energy efficient.
Ideal size (0.75 L Beads)
Replaces 2 standard heating blocks.
Sigma Aldrich Fine Chemicals Biosciences Micro particles based on p
MICRO Micro particles based on p
Thomas Scientific Staticmaster Ionizing Cartridge
Static Eliminator Duostat For neutralization of static charge on balances, optics, films, etc. Strength 500 µCi; effective range approximately 40 mm No state or USNRC-specific license is required to purchase or possess this unit. Effective life span is one year. Spent unit may be mailed to the manufacturer for proper disposal. Unit can be placed in or near the item to be neutralized or can be mounted on 3620A50 (1 each of 3620A30 must be purchased to use 3620A50 Single Unit Positioner, A30 Ionizing Units may be used without positioner). Stand of stainless steel with flexible gooseneck arm and maximum height of 15”. Stainless steel housing 3” x 1” x 1/4” high, with mounting tabs. Instantly solves the problem created by static when weighing filters; increases accuracy and repeatability Just one passage through the unit offers reliable, repeatable weighings Portable and easy positioning, requires a minimum amount of bench space. Staticmaster Ionizing Car