Beakers
Glass beakers can be heated to much higher temperatures than the plastic counterparts, while offering higher clarity for content visibility and measuring. Glass beakers feature uniform sidewalls and bottom thicknesses with a flat bottom and a beak, or small spout, for easier pouring. Glass beakers may have graduated markings on their side that are accurate within 10 percent, though a graduated cylinder or volumetric flask is recommended for precise volume measurements.
Laboratory are available in a range of materials and in sizes from 10 mL to 6 L. Although glass beakers are common, beakers are also made from a variety of plastic resins (PMP, polystyrene, polypropylene, PFA, polymethylpentene, HDPE, ETFE, PTFE, and more). You may also find beakers made from stainless steel, quartz, and carbon.
A variety of beaker types are available:
- Griffin or Low Form: Shorter versions, with or without pouring lips and made of standard weight or heavy-duty borosilicate glass or polypropylene plastic
- Berzelius or Tall Form: Taller and narrower than Griffin beakers, but with similar characteristics
- Pharmaceutical: Taller and more narrow, these beakers are usually graduated in both milliliters and ounces and may have double pouring spouts
- Tri-Cornered: Plastic, disposable, and stackable, these beakers feature a triangular top opening that offers three dripless pouring spouts
- Handled: Glass beakers can have attachable handles and plastic beakers may have molded-in handles; larger handled beakers with spouts may be called pitchers
- Colored Markings: Most beakers have areas on the side suitable for writing; these marking spots are also available in white or your choice of colors
Ace Glass, Inc. 3000mL, two-piece jacketed pressure reactor, complete with28/15 ball joint inlet/outlets, 150mm head with #15 center, (4)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and stirring assembly
3000mL, two-piece jacketed pressure reactor, complete with28/15 ball joint inlet/outlets, 150mm head with #15 center, (4)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and stirring assembly
Ace Glass, Inc. 3000mL pressure vessel body, jacketed, 150mm flange, round bottom, #15 Ace-Thred inlet/outlet, use with 1/2in ID tubing
3000mL pressure vessel body, jacketed, 150mm flange, round bottom, #15 Ace-Thred inlet/outlet, use with 1/2in ID tubing
Perkin Elmer US LLC Single Lip Seal Forming Tool for Standard 75 mL, 40 Bar Digestion Vessel Pressure Seals
The Single Lip Seal Forming Tool is used to expand one 75 mL vessel seal at a time. This is shipped with all 75 mL vessel systems.
Sklar Instruments Steelware Sklar Microscopy Surgical 12/PK
Steelware Sklar Microscopy Surgical 12/PK
Ace Glass, Inc. 1000mL, two-piece jacketed pressure reactor, complete with28/15 ball joint inlet/outlets, 100mm head with #15 center, (3)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and stirring assembly
1000mL, two-piece jacketed pressure reactor, complete with28/15 ball joint inlet/outlets, 100mm head with #15 center, (3)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and stirring assembly
Perkin Elmer US LLC 8-Position Lip Seal Forming Tool for Standard 75 mL, 40 Bar Digestion Vessel Pressure Seals
Forming tool for pressure seals used with Standard 75 mL (40 Bar) Digestion Vessels for Titan MPS 16-Position Microwave Sample Preparation Systems.
Ace Glass, Inc. Beaker, 3L, jacketed, glass hose connections for 7/16 or 1/2intubing, 225mm inside height, 133mm inside diameter
Beaker,3L,jacketed,glass hose connections for 7/16 or 1/2in tubing,225mm inside height,133mm inside diameter
Ace Glass, Inc. 2000mL pressure vessel body, jacketed, 100mm flange, round bottom, #11 Ace-Thred inlet/outlet, use with 3/8in ID tubing
2000mL pressure vessel body, jacketed, 100mm flange, round bottom, #11 Ace-Thred inlet/outlet, use with 3/8in ID tubing
Ace Glass, Inc. 2000mL, two-piece jacketed pressure reactor, complete with28/15 ball joint inlet/outlets, 100mm head with #15 center, (3)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and stirring assembly
2000mL, two-piece jacketed pressure reactor, complete with28/15 ball joint inlet/outlets, 100mm head with #15 center, (3)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and stirring assembly
Ace Glass, Inc. Funnel, addition, jacketed, 1000mL, 29/32 joints, 4mm
1000mL graduated addition funnel with outside jacket for cooling and/or heating. Jacket extends from just below shoulder of vessel down to the bottom tube just below the stopcock. Stopcock is a 4mm bore PTFE plug. Bottom drip tube extends to the edge of the lower, 29/32 inner standard taper joint. Top outer reinforced joint is also 29/32. Side hose barbs are size D for 3/8 I.D. tubing.
Grainger G2375 Webbing Polypropylene 2 W Orange
The Grainger Approved 2" Wide Orange Polypropylene Webbing is a strong, lightweight webbing made of polypropylene and measuring 2" wide. It features excellent resistance to rot, mildew and abrasion. This orange webbing has a breaking strength of 1,200 lbs and meets military specification MIL-W-4088 Type VIII for quality assurance. It can be used for a variety of applications including tie downs, tow straps, slings, harnesses and more. This polypropylene webbing comes in a 100 ft roll and is an ideal choice for industrial, commercial and DIY projects where high visibility orange webbing is needed.
Grainger G2371 Webbing Polypropylene 1 W Orange
The Bulk Strap Bulk Webbing Webbing is a 1-inch wide polypropylene webbing strap sold in a 500 foot roll. It is lightweight and economical, with a breaking strength of 750 pounds. The strap is UV treated for outdoor use and has a temperature range of -20F to 160F. It can be used for a variety of purposes including bundling, securing cargo, and craft projects. The strap meets military specification MIL-W-4088 Type III and is made in the USA.