Pump Plunger Assemblies
Cole-Parmer KNF UN726.3FTI EX Explosion Proof Motor Vacuum Pump, PTFE/PTFE; 0.6 cfm/29.5"Hg
Diaphragm pumps are fitted with Class I, Division 1, Groups C & D explosion-proof motors. Designed for continuous, heavy-duty use, ball bearings are used throughout to provide exceptional reliability. Models are fitted with a pre-wired connection box and are tested and ready to install into your system. Contact one of our Application Specialists for assistance with selecting the proper pump for your needs.
AVANTOR MASTERFLEX (VWR LLC) RPL MTR 600RPM FOR L/S 7730142
NC2745753 RPL MTR 600RPM FOR L/S 7730142
LONGER PUMP Pumps/ peristaltic pumps/ Longer Pump WT600-4F&YZ35-13, Flow Rate: 100-11000ml/min, Up to 2 Channels, High IP Rating, Ideal for Harsh Environments
Pumps/ peristaltic pumps/ Longer Pump WT600-4F&YZ35-13Specification- Speed: 10rpm-600rpm- Speed resolution: 1rpm- Control mode: Control panel, external signal control and communication control are available- Work mode: Flowrate mode and dispensing mode- Flowrate calibration: Improve flow rate accuracy- Dispensing volume: 100mL-999L- Copy number: 1 to 9999, 0 means unlimited cycle- Pause time: 0.1s to 99.9min, resolution is 0.1s- Back suction circle: 0 to 9.9 circle, resolution is 0.1 circle- External control: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)- Speed output: 125Hz-7.5kHz corresponding to 10-600rpm- Communication interface: RS485- Dimension (L × W × H): 360 × 215 × 243 (mm)- Power supply: AC110V±20%/300W or AC220V±20%/300W- Operating temperature: 0 to 40°C- Relative humidity: <100%- IP rating: IP65- Weight: 12kg
LONGER PUMP Pumps/ peristaltic pumps/ Longer Pump dPOFLEX PFU with pump head PFH02 Micro-volume Filling, Accuracy ±1%, CV <0.5%, filling volume 1uL-99.9L, Up to 32 Channels, FDA Compliant
Pumps/ peristaltic pumps/ Longer Pump dPOFLEX PFUSpecifications- Pump head: PFH02- Filling volume: 1uL-99.99L- Filling accuracy: Better than ±1%- Filling precision: CV<0.5%- Filling time: 0.1 seconds-999.9 hours- Filling cycle: 0-999999, 0 means unlimited- Interval time: 0.1s - 999.9s- Back suction parameter: 0-30- Work mode: Single channel filling, multi-channel filling with the same parameters or individual parameters- Parameter recipe: Up to 500 recipes can be stored and recalled easily on the PFC controller- Communication control: RS485 interface, Modbus RTU protocol- External control input: Start the pump, emergency stop, disable channel- IP rating: IP31- Power supply: AC 100V-240V, 50/60Hz, 60W- Dimension: 119mm x 203mm x 176mm- Weight of system: 3.5kg- Working condition: Temperature: 5-40°C, RH: ≤85%, no condensation- Storage and transportation condition: Temperature: -40-70°C, RH: ≤85%, no condensation
LONGER PUMP Pumps/ peristaltic pumps/ Longer Pump OEM PUMP T100-SV-10&YZ1515X-A, Multi-control Modes, Flow Rate: ≤430ml/min, Good EMC Performance, Low Vibration, CE Certified
Pumps/ peristaltic pumps/ Longer Pump OEM PUMP T100-SV-10&YZ1515X-ASpecificationSpeed: ≤100rpmSpeed resolution: 0.1rpm*Direction control: Direction is controlled by external switch signal. CW when switch is open, CCW when switch is closed.*Start/stop control: Start/stop is controlled by external switch signal. Pump runs when switch is open, stops when switch is closed.*BCD dial switch speed control: The speed is divided into 15 grades. BCD position 1-F corresponding to 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 60, 70, 80, 90, 100(rpm)*External speed control (optional): 4-20mA, 0-5V, 0-10V, 0-10kHzCommunication control: RS485 interface,compatible both with Longer OEM protocol or Modbus protocolCommunication Pump ID: Pump ID range is 1-30Bit rate: 1200bps or 9600bpsPower-off memory: Return to previous status when powered onPower supply: DC24V/50W
Med Vet International Jorvet Stomach Pump, Large, J0132L
400cc per up stroke and 220cc per down stroke. Excellent for large volume of fluids in a short time. Three times the volume per stroke versus standard pumps. Separate handle to help brace pump upright when using.
Grainger Black Pipe Nipple Threaded 1/2x1-1/8 In
The Beck Nipple is a black anodized steel nipple fitting with National Pipe Thread (NPT) connections. It has a standard weight wall and is made from ASTM A53 carbon steel. This nipple has 1/2 inch NPT straight thread connections and is 2 inches in length. It can be used to connect and extend threaded pipe. The maximum pressure rating is 6000 psi at 100°F. This nipple fitting is manufactured in the USA by Beck Manufacturing in accordance with ANSI standards. It weighs approximately 0.22 lbs.
Grainger Black Pipe Nipple Threaded 3/4x5 In
The Grainger Approved 1/2 in. Black Iron Pipe Nipple is made from malleable iron and has National Pipe Thread ends. It is 6 in. long and can be used to extend and connect black iron piping. This nipple meets ASME B16.3 specifications and is rated to 300 psi WOG at ambient temperatures. It features a black finish to resist rust and corrosion. The nipple's iron construction provides durability while its short length allows for convenient installations. This product enables users to make secure threaded black iron pipe connections.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Cable Assembly for Remote Control, 18-pin Round Connector; 25 ft (7.6 m) Cable Length
Cables include noted terminal connector and cable with stripped wire ends for connection to PLC or other control interface.