Pump Plunger Assemblies
AVANTOR MASTERFLEX (VWR LLC) Masterflex L/S Easy-Load 3 Pump Head Mounting Hardware, Mounts One Pump Head, Stainless Steel
Designed to make the Masterflex L/S series pump head flexible for a wide range of applications. Choose from different material or increase the number of pump heads on your L/S drive with mounting hardware. Compatible with the Masterflex L/S series peristaltic drives.
Perkin Elmer US LLC Magazine for Liquid Sample Sealer
The Liquid Sample Sealer is used to seal volatile, non-viscous, non-corrosive samples in either the 4 µL aluminum capsules (02400642) or 30 µL aluminum capsules (00090709).
AVANTOR MASTERFLEX (VWR LLC) Masterflex 230 VAC power cord with NEMA 6-15P plug, 6-ft long
Choose an interchangeable cord/plug assembly for 115 or 230 VAC operation. Each 6-ft (1.8 m) cord and moded plug assembly features an IEC 320 appliance connector and rated for 10 A at 250 VAC.
Precision Plus Vacuum Parts Inc Edwards, E2M18, Maintenance kit
Edwards, E2M 18, Maintenance kits includes vanes, springs and pins (as required) seals, coupling element, o-rings, and gaskets.
Precision Plus Vacuum Parts Inc Edwards, RV12, Major Repair Kit
Edwards, RV12, Major Repair Kit with blades, springs, pins and coupling elements, o-rings,gaskets, airbleed assembly, ducting sheet, shaft seals.
AVANTOR MASTERFLEX (VWR LLC) Stainless steel mounting hardware; for one L/S Easy-Load II pump head.
Masterflex Stainless steel mounting hardware; for one L/S Easy-Load II pump head. Designed to make the Masterflex L/S series pump head flexible for a wide range of applicationsChoose from different material or increase the number of pump heads on your L/S drive with mounting hardwareCompatible with the Masterflex L/S series peristaltic drives
Precision Plus Vacuum Parts Inc PRECISION PLUS VACUUM PARTS INC
NC4029399 VPL M68 MINERAL VACUUM PUMP OI
GARDNER DENVER WELCH VACUUM TECH INC REBUILD KIT WELCH 2522 PUMP
NC1526419 REBUILD KIT WELCH 2522 PUMP
AVANTOR MASTERFLEX (VWR LLC) Masterflex Doppler Ultrasonic Transducer for 1"" and Larger Pipe
Use these doppler flowmeters measure the flow of liquids in pipes from 1/4" and larger. Each flowmeter requires a transducer (32615-66 or -68) and a monitor (32615-60, -62, or -64).|The transducers send flow data via RG59 coax cable to the monitor, and the monitor¿s software automatically adjusts filtering parameters and gain settings to ensure reliable readings are ensured over a wide range of liquid and reflector conditions. Easily configure the monitor using the front panel keypad. A two-line backlit LCD displays rate and accumulated flow values in user selected measuring units. Models 32615-62 and -64 have a 4 to 20 mA input and output for datalogging or recording. A 4 to 20 mA input must be supplied for a 4 to 20 mA output. The monitor is housed in a NEMA 4X (IP-66) enclosure. The NEMA 6 (IP67) rating has the ability to work with temperatures up to 400¿F (200¿C).