Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
HARVARD BIOSCIENCE INC PE 90/10
Total order minimum requirement of $500. If only item on order, must order QTY of 9.PE 90/10
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Norprene, 3/8"" ID x 1/2"" OD; 50 ft
This tubing is ideal for chemical, heat, ozone, and ultraviolet (UV) light resistance applications. Characteristics include nonconductive, heat-sealable, nonaging, nonoxidizing, with superior acid and alkali resistance. They are manufactured according to GMP. Temperature range is -75 to 275¿F (-60 to 135¿C). Can be sterilized with autoclave.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Tygon ND-100-65, Non-DEHP, 1/16"" ID x 1/8"" OD; 50 ft
Formulation: ND-100-65 Applications: Pharmaceutical and biotech research applications. Characteristics:Non-DEHP, phthalate free. Non-wetted surface permits complete drainage. Bondable, weldable. Clear. Certification: USP Class VI, REACH, ISO 10993 Temperature range: -44 to 165¿F (-42 to 74¿C) Sterilize: Autoclave, ethylene oxide, or irradiation.
AVANTOR MASTERFLEX (VWR LLC) Ismatec Pump Tubing, Similar to SC0451, Peroxide-Cured Silicone, 1.02 mm ID; 50 ft
NC1597444 MASTERFLEX SC0451 TUB 50/PK
Glass Expansion Peristaltic Pump Tubing, PVC, 2-tag, for large pump white/white, 1.02 mm with flared ends. Inexpensive all-around tubing for general applications. Pack of 6 (1360400227, 842312051521)
Contour Flared End PVC Pump Tube 2tag 1.02mm ID White/White (PKT 6).Tag Colors: White/WhiteID mm: 1.02Wall Thickness mm: 0.86OD mm: 2.74Overall Length: 455mm (152mm spacing between tags)Number of Tubes Per Pack: 6Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon R3603/R3607 or equivalent.Special Properties: Inexpensive all-around tubing for general laboratory applicationsChemical Compatibility: Excellent for aqueous solutions of the following acids and concentrations, up to 35% Nitric Acid, up to 37% Hydrochloric Acid, up to 25% Hydrofluoric Acid, up to 30% Hydrogen Peroxide.Limitations: Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Polyimide, 0.0710"" ID x 0.0750"" OD, 12""L; 5/PK
The tubing is ideal for use as an electrical and thermal insulator, for fluid and gas delivery, or as a tough sheath for glass fibers. It offers excellent chemical, heat, radiation, and abrasion resistance and high dielectric strength. Resin meets USP Class VI requirements and NEMA standards. The tube has a temperature range of -418 to 896¿F (¿250 to 480¿C). Can be sterilized with autoclave, ethylene oxide or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) Ismatec Pump Tubing, 3-Stop, Tygon LMT-55, 3.17 mm ID; 12/PK
The overall length of LMT-55 97619-series stop tubing is 16" (406 mm). The legacy Ismatec stop tubing was 400 mm long.
Order extension tubing under "Accessories". For technical assistance selecting tubing formulations and sizes, contact our Application Specialists.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Tygon E-3603, Non-DEHP, 5/16"" ID x 7/16"" OD; 50 ft
This tubing is ideal for general laboratory use. They offer long life, won't age or oxidize, fits tightly to glass and metal, bends to small radius curves, are nontoxic. FDA compliant and made according to GMP. Temperature range is -51 to 165¿F (-46 to 73¿C). Can be sterilized with ethylene oxide or autoclave.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Polyimide, 0.0320"" ID x 0.0340"" OD, 12""L; 5/PK
The tubing is ideal for use as an electrical and thermal insulator, for fluid and gas delivery, or as a tough sheath for glass fibers. It offers excellent chemical, heat, radiation, and abrasion resistance and high dielectric strength. Resin meets USP Class VI requirements and NEMA standards. The tube has a temperature range of -418 to 896¿F (¿250 to 480¿C). Can be sterilized with autoclave, ethylene oxide or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) Vacuum Tubing, 3/8""ID x 7/8""OD, 10 ft/pack
Transparent Vacuum Tubing, 3/8"ID x 7/8"OD, 10 ft/pack. Formulation: Tygon E-3603 vacuumApplications: General lab, food and beverage, and biopharm. Vacuum service of 29.9¿ Hg (760 mm Hg) at 73¿F (23¿C).Characteristics: Non-DEHP, phthalate-free plasticizer. Flexible, biodegradable, crack-resistant, nontoxic, and nonoxidizing. Clear.Certifications: USP Class VI and NSF 51Temperature range: Brittle temperature is ¿51F (¿46¿C).Sterilize: Ethylene oxide or autoclave for 30 min at 250¿F (121¿C), 15 psi (1 bar).
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Tygon ND-100-80 Microbore, 0.010"" ID x 0.030"" OD; 100 ft
Formulation: Tygon ND-100-80 Applications: General laboratory and pharmaceutical use, especially with precision injection or dispensing applications. Also excellent with low-flow peristaltic pump applications. Characteristics: Extremely flexible. Non-toxic; nonpyrogenic; biocompatible. Crystal clear. Certifications: Resin meets USP Class VI requirements. Temperature range: -25 to 185¿F (-31 to 85¿C) Sterilize: Autoclave, ethylene oxide, or gamma irradiation.