Plastic Tubing

Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.

How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.

Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation

Search Within Results

2,191 – 2,205 of 3,482 results

2,191

Grainger Corrugated Tubing Nylon 3/4 in 25 ft

The 3/4" Corrugated Loom Tubing by Electriduct is a flexible plastic tubing designed to protect and organize wires and cables. It has an inner diameter of 0.75 inches and is made of polyethylene material. The tubing features a corrugated design which allows it to easily flex and bend. It is offered in a 25 foot length and black color. The operating temperature range is -20°F to 176°F. Potential applications include bundling computer cables, extension cords, wiring harnesses and more. The tubing helps prevent abrasion and tangling of wires while providing a neat, managed appearance.

Pricing & Availability

2,192

AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LFL 2.62MMID 12PK

Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-LFL, 2.62 mm ID; 12/PK, Avantor

Pricing & Availability

2,193

MSC

5000532853 5-9/16X9-3/8 CLR/BLK WATERTIG

Pricing & Availability

2,194

Accuflow Systems STHT-C Tubing 25-foot, ID 0.125"" x OD 0.250"" x Wall 0.063"" is ultra-pure biopharmaceutical-grade silicone with unsurpassed surface smoothness. STHT-C is autoclavable and sterilizable, has a temperature range from 80F (-62C) to 500F (260C)

Sani-Tech STHT-C is an ultra-pure biopharmaceutical-grade tubing. This platinum-cured silicone tubing resists temperature extremes, ozone, radiation, moisture, compression sets, weathering and chemical attack, and imparts no odors to fluids transported within it. Sani-Tech STHT-C silicone tubing is suitable for sterilization by gamma irradiation and steam. Sani-Tech STHT-C, in 1/16'' ID and greater, comes with laser-marked part numbers and lot codes to provide total product traceability. Meets USP Class VI, European Pharmacopoeia 3.1.9 and FDA criteria.

Pricing & Availability

2,195

Med Vet International Suction Tubing 1/4" X 12'

Top Quality - Sterile Suction Tubing

Pricing & Availability

2,196

Med Vet International Dynarex Etco2 Nasal Sampling Cannula, 14' (4.2 M) Tubing w/Male Luer, Adult/Standard 02 Tubing Connector, 25/Case

Dynarex Resp-O2 EtCO2 Nasal Sampling Cannulas with Cushion Nasal Tips are designed to help monitor exhaled carbon dioxide during respiratory treatment. Each soft, cushioned cannula features a permanent barrier between the nasal prongs so that EtCO2 can be sampled from one nostril while oxygen continues to flow to the other nostril. Permanent barrier between nasal prongs allows for EtCO2 sampling with uninterrupted oxygen delivery Constructed from soft materials for added patient comfort Crush-resistant tubing helps prevent occlusion and kinking Features EtCO2 sampling line and O2 tubing of equal length Transparent design allows for clear visualization Not made with natural rubber latex or DEHP

Pricing & Availability

2,197

Waters Corp Tubing, FEP, 4.0 OD x 2.5 ID, 1 m

This spare part is a Waters Quality part

Pricing & Availability

2,198

Waters Corp Tubing, PTFE, .080 in OD x .058 in ID x 25 ft (2 mm OD x 1.5 mm ID x 7.6 m)

Tubing, PTFE, .080 in OD x .058 in ID x 25 ft (2 mm OD x 1.5 mm ID x 7.6 m)

Pricing & Availability

2,199

Cole-Parmer Thermoplastic (SEBS) Tubing, 1/2" ID x 3/4" OD; 50 Ft

Designed for the most demanding biopharmaceutical applications, the thermoplastic SEBS (styrene-ethylene-butylene-styrene) tubing exhibits superior gas barrier properties and excellent pressure performance. Use the tubing in peristaltic pumps, single-use assemblies, process filling, and sampling devices.

Thermoplastic (SEBS) tubing does not contain BPA, phthalates, PVC, or peroxides that can leach out into the fluid, making it ideal for pharmaceutical applications, buffer and media preparation, and cell media processing. For an added level of particle control, a liner is placed between the tubing package and the box.