Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Accuflow Systems Saint-Gobain Silicone Tubing, Ultra-Pure Platinum-Cured, 0.38 in ID, 50 ft
Saint-Gobain Sani-Tech Ultra-C silicone tubing is an ultra-pure, platinum-cured silicone tube engineered for biopharmaceutical and laboratory fluid transfer applications. It provides low extractables, extended pump life, and compatibility with repeated autoclaving for sterile processing, media handling, and fill/finish operations.
- Ultra-pure platinum-cured silicone construction.
- 0.38 in (9.53 mm) inner diameter.
- 0.63 in (15.88 mm) outer diameter.
- 0.13 in (3.18 mm) wall thickness.
- 50 ft (15.24 m) coil length.
- 50 Shore A hardness.
- Temperature range -80 °F (-62 °C) to 500 °F (260 °C).
- Meets USP <88> Class VI, USP <87>, ISO 10993-5, and European Pharmacopoeia 3.1.9.
- Typical applications: sterile fill and transfers, media/buffer processing, pumping, cell culture, chromatography, filtration, and fermentation.
Grainger Tubing: Tygon B-44-5X IB, Tygon, 1/2 in Inside Dia, 3/4 in Outside Dia, 50 ft Lg, Clear
Tubing: Tygon B-44-5X IB, Tygon, 1/2 in Inside Dia, 3/4 in Outside Dia, 50 ft Lg, Clear
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Peroxide-Cured Silicone, 1/4"" ID x 7/16"" OD; 25 ft
Applications: Pharmaceutical, biotechnology, food and beverage, aerospace, and general lab applications. Characteristics: Peroxide-cured, excellent heat resistance, low compression set, odorless, nontoxic, translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and meets USP Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -60 to 460¿F (-51 to 238¿C) Sterilize: Autoclave or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Platinum-Cured Silicone, 1/2"" ID x 3/4"" OD; 25 ft
Applications: Pharmaceutical, biotechnology, aerospace, food and beverage, and general lab applications. Characteristics: Platinum-cured, excellent heat resistance, low compression set, odorless, nontoxic, translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and meets USP Class VI; exceeds 3A Sanitary Standards. Tubing is manufactured according to GMP. Temperature range: -58 to 446¿F (-50 to 230¿C) Sterilize: Autoclave or gamma irradiation.
McKesson General Medical IV EXT SET 7 IN TUBING 48/CS
IV Extension Set 7 Inch Tubing 1.9 mL Priming Volume DEHP