Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Accuflow Systems Saint-Gobain Versilon FEP Tubing, 1/8 in ID, 3/16 in OD, 0.031 in Wall
High-purity FEP tubing designed for chemical transfer and laboratory fluid handling. The transparent, flexible tube offers excellent chemical resistance, stable physical and electrical properties, and a wide operating temperature range for demanding applications.
- Inner diameter: 1/8 in (3.18 mm)
- Outer diameter: 3/16 in (4.76 mm)
- Wall thickness: 0.031 in (0.79 mm)
- Package length: 50 ft
- Material: FEP (fluorinated ethylene propylene)
- Maximum operating temperature: up to 206°C (402°F)
- Properties: chemically inert, noncorroding, UV resistant, excellent physical and electrical characteristics
- Applications: chemical transfer, laboratory use, food and beverage dispensing, and general-purpose fluid handling
Accuflow Systems Saint-Gobain FEP Tubing, 5/32 ID x 1/4 OD, 50 ft
FEP tubing with 5/32 in inner diameter and 1/4 in outer diameter, 0.047 in wall thickness, supplied in a 50 ft coil. The tubing offers broad chemical compatibility and a wide operating temperature range suitable for laboratory, pharmaceutical, bioprocessing, and semiconductor fluid-transfer applications.
- FEP fluoropolymer construction provides chemical inertness and low extractables.
- 5/32 in inner diameter, 1/4 in outer diameter, 0.047 in wall thickness.
- Supplied as a 50 ft length coil for continuous runs or dispensing.
- Wide temperature range: -328°F to 402°F (-200°C to 206°C).
- Resistant to most solvents, acids, and fuels.
- UV resistant for extended outdoor or light-exposed use.
Helix Medical Inc TUBING SIL .250 X .450 25FT
Platinum-cured 60 duro peristaltic tubing that provides superior strength, performance and longer life. Meets strength and durability requirements associated with peroxide-cured tubing. Fits Sz 24TW.
Helix Medical Inc TUBING SIL .125 X .251 25FT
Platinum-cured 60 duro peristaltic tubing that provides superior strength, performance and longer life. Meets strength and durability requirements associated with peroxide-cured tubing.
Astoria Pacific International YELLOW/BLU TUBING
This item has a minimum qty of 4 per supplier requirements.
Accuflow Systems TuFlux TPE 1/8"x1/4" (1/8 x 1/4 inch, 3,2 x 6,4 mm)
Manufactured by Sartorius, TuFlux TPE ⅛” x ¼” (3.2 x 6.4 mm x wall thickness 1.6 mm) 1 coil = 200 m
Foxx Life Sciences Imaweld Heat Sealable and Weldable TPE Tube 9.5mm (3/8") ID X 15.87mm (5/8") OD, 50 FT
Imaweld is thermoplastic elastomer opaque tubing designed for fluid transfer in pharmaceutical and biotech applications. Imaweld is specially formulated which meets requirement of pharmaceutical industries with superiority compare to PVC and Silicone.• Free of any toxic ingredients. successfully meets toxicity free requirements.• Manufactured and Packaged in Clean Room Class of ISO 9001, ISO 14001 and OHSAS 18001 certified facility• Heat sealable and weldable to facilitate sterile connection• Working Temperature Range -40°C to +135°C• USP Class VI Certification• TSE/BSE CertificationAll standard dimensions are in mm and Inch dimensions are for reference only.