Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Pacer Global LLC Saint Gobain SaniTech-C Tubing, 0.5" ID, 0.875" OD, 0.1875" Wall, 50 Foot Coil, 1/EA
Saint Gobain SaniTech-C Tubing, 0.5" ID, 0.875" OD, 0.1875" Wall, 50 Foot Coil, 1/EA
Grainger InsulMultitapCon PVC 14 AWG 1/0 AWG
The Polaris Insulated Multitap Connector is an electrical connector that allows multiple wires to be connected to a single point. It is rated for 600 volts and can accommodate wire sizes from 14-10 AWG. The connector has 4 ports and is made from thermoplastic polyester with nickel-plated brass terminals. It is UL listed and CSA certified. The multitap is insulated to help prevent shorts and is ideal for splicing and extending circuits. This connector can be installed by stripping the wires, inserting them into the ports, and tightening the screws to secure the wires. It is manufactured by Polaris in the United States.
AVANTOR MASTERFLEX (VWR LLC) TBNG LMT-55 0.57MM ID 33FT/PK
Masterflex Ismatec Pump Tubing, Tygon LMT-55, 0.57 mm ID; 33 ft, Avantor
Sani Tech West Inc PVC TUBING WITH A MALE FITTING
This item has a minimum qty of 9 per supplier requirements.
AVANTOR MASTERFLEX (VWR LLC) TBNG TYGN E-LFL 0.25MMID 100FT
Masterflex Ismatec Pump Tubing, Tygon S3™ E-LFL, 0.25 mm ID; 100 ft, Avantor
Hach Company PFA TUBING 1/4 OD X 1/8 ID 1M
PFA tubing, 1/4 OD x 1/8 ID (6.35mm OD x 3.18mm ID)- 1 Meter
Accuflow Systems Saint-Gobain Tygon Tubing, 1/8 in ID, 1/4 in OD, Clear
Saint-Gobain Tygon B-44-4X tubing is a clear, food-contact flexible tubing engineered for dairy, beverage, and dispensing applications. It features a smooth, non-porous bore that resists particulate entrapment and is compatible with common sanitary cleaners, providing reliable fluid transfer in food-processing systems.
- Clear, smooth, non-porous bore that resists particulate entrapment.
- Phthalate- and BPA-free formulation suitable for food contact.
- Inner diameter 1/8 in (3.18 mm), outer diameter 1/4 in (6.35 mm).
- Maximum working pressure 60 psi (4.1 bar) at 73°F (23°C).
- Maximum recommended operating temperature 165°F (74°C).
- Minimum bend radius 3/8 in (9.53 mm).
- Complies with FDA food additive regulations, NSF-51, NSF-61, 3-A, REACH, and EU food-contact regulations.
- Resistant to harsh alkaline cleaners and sanitizers.
McMaster-Carr PTFE SEMI-CLEAR TUBING 50FT
McMaster-Carr sells semi-clear plastic tubing in materials like PVC and nylon, with diameters from 1/16 to 2 inches. Available in various thicknesses and hardness, the tubing endures -60 to 200°F and suits airlines, water lines, and beverage dispensing. It's flexible, kink-resistant, and meets FDA and NSF food contact standards. Technical specs such as chemical resistance and tensile strength are provided. Buy by the foot or in custom lengths.
Accuflow Systems TUBING VINYL 3/16 x 1/16 50FT/PK
Saint Gobain Clear PVC Tubing Diameter Inner 0.188 in. 4.8 mm Diameter Outer 5/16 in. 7.9 mm Thickness 1.6 mm 0.0625 in. Overall Length 50 ft. 15.2 m
Accuflow Systems TUBING VINYL 3/8 x 1/16 50FT/PK
Saint Gobain Clear PVC Tubing Diameter Inner 3/8 in. 9.5 mm Diameter Outer 1/2 in. 12.7 mm Thickness 1.6 mm 0.0625 in. Overall Length 50 ft. 15.2 m
Accuflow Systems TUBING VINYL 1/4 x 3/32 50FT/PK
Saint Gobain Clear PVC Tubing Diameter Inner 1/4 in. 6.4 mm Diameter Outer 7/16 in. 11 mm Thickness 2.4 mm 0.093 in. Overall Length 50 ft. 15.2 m
Accuflow Systems TUBING VINYL 1/2 x 1/8 50FT/PK
Saint Gobain Clear PVC Tubing Diameter Inner 1/2 in. 12.7 mm Diameter Outer 3/4 in. 19 mm Thickness 3.2 mm 0.125 in. Overall Length 50 ft. 15.2 m