Tubing Connectors and Fittings
Foxx Life Sciences EZBio Connector Assembly 3/4" x 3/4" Steam-Thru (STC2020900) with Aseptiquik S (AQS33012) Series Connector, Sterile, 5/CS
The AseptiQuik STC Connectors allow a quick sterile connection between biopharmaceutical processing equipment and single-use systems. The Union of the two connectors into a single unit through a Foxx sanitary Tri-clamp allows AseptiQuik sterile connection to be steamed onto the stainless steel equipment via SIP. After the SIP cycle, a wide range of Single-Use Systems can be connected with the AseptiQuik G or AseptiQuik S Sterile connector. The SIP process can be done in advance, allowing a quick and easy sterile connection to the AseptiQuik half without waiting 30-60 minutes for SIP before harvest.
The AseptiQuik STC Connector connects stainless steel processing equipment via 3/4"" or 1-1/2"" Sanitary Termination.
Steam Position
Temperature: 39°F to 104°F (4°C to 40°C)
Pressure: Up to 35 psi, 2.4 bar (Steam-Thru II)
Flow Position
Temperature: 39°F to 104°F (4°C to 40°C)
Pressure: Vacuum to 20 psi, 1.4 bar
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, Nylon, Elbow, Hose Barb Union, 1/2"" ID; 10/PK
Create 90¿ bends in flexible tubing¿without the kinks!
AVANTOR MASTERFLEX (VWR LLC) NIPPLE 1/8FTFT 10/PK
Masterflex Fitting, Natural Polypropylene, Straight, Male Thread Adapter, 1/8IN NPT(M)10/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) Y-CONNECTORS PP 3/4 5/PK
Masterflex Fitting, Polypropylene, Y-Connector, Hose Barb Union, 3/4IN ID; 5/PK, Avantor
McMaster-Carr Push-to-Connect Tube Fitting for Air
Push-to-Connect Tube Fitting for Air90 Degree Swivel Elbow, for 1/8" Tube OD x 1/8 NPT Male
AVANTOR MASTERFLEX (VWR LLC) FITTING TEE 5/16FTFT 10/PK
Masterflex Fitting, Polypropylene, Tee, Hose Barb Union, 5/16IN ID; 10/PK, Avantor
BURKLE INC Y-connector, PP, f. Ø 0.35-0.43 in. (9-11 mm), cylindrical nozzles
Cylindrical Y hose connector to connect hoses.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, HDPE, Tee, Hose Barb Union, 3/4"" ID; 100/PK
Barbed tee fittings are designed for quick and easy assembly. Combine these simple, economical fittings with our flexible tubing for use in your low-pressure applications (generally less than 30 psi).