HPLC Solvent Handling Component Accessories
Bellco Glass, Inc. 3-Port Sparger Assembly W/Frit,36L For Vertical Side Arm Vessels
316-l stainless steel ra32 or better finish10 micron porosity stainless steel frit for low profile vertical side arm vessels. MADE IN THE USA. Frit is removable for cleaning. Comes with 45mm blue polypropylene open top cap and silicone gasketTriple tube configuration With Vent, Fill/Sample And Sparge.
Bellco Glass, Inc. Low Profile 2-P Stainless Steel Sparger Assembly , 6L
Sparger assembly for 6l low profile Over Head Drive vessel. This fits through a 45mm sidearm. Designed for vertical side arm vessels. MADE IN THE USA Sparger tube: 10 1/8" long 316 l SST 20 ra material. 12mm od coarse glass frit (40-60µ) Gently introduces bubbles into vessel.
Bellco Glass, Inc. L-Shape Sparger W/Stainless Steel Frit ,7L
Stainless steal sparger has stainless steal frit with 10 micron porosity for introduction of gentle stream of air bubbles into bioreactor vessel beneath the impeller of mammalian cell culture. Fits into 10mm port on 3L metric headplate. Overall Length: 14.7/16". Insertion Length: 13". Supply complete: O-Ring, SST Washer & Nut.. MADE IN THE USA
Analytical Sales & Services Canary-Safe Cap 4, GL45, 4 Standard Tubing Ports
Canary-SafeIDX Cap 4 (GL45), 4 Standard Tubing Ports
Analytical Sales & Services Canary-Safe Cap 3, GL45, 3 Standard Tubing Ports
Canary-SafeIDX Cap 3 (GL45), 3 Standard Tubing Ports
Bellco Glass, Inc. L-Shape Sparger W/Stainless Steel Frit ,3L For 10mm Port
Stainless steal sparger has stainless steal frit with 10 micron porosity for introduction of gentle stream of air bubbles into bioreactor vessel beneath the impeller of mammalian cell culture. Fits into 10mm port on 3L metric headplate. L-Shaped Hose Barb Sparger W/SST Filter,3L. Material: 316L with electropolish finish. Overall Length: 11 3/16". Insertion Length: 9 3/4". Supply complete: O-Ring, SST Washer & Nut. SST Filter: 10µm. . MADE IN THE USA
Analytical Sales & Services Canary-Safe Cap GL38, Mobile Phase Bottle Safety Cap, Prevents Solvent Evaporation, 3 Standard Ports, Unit: each
The Canary-Safe Cap GL38 with 3 Standard Tubing Ports is designed for secure solvent management, enhancing laboratory safety by preventing evaporation. With its GL38 thread compatibility and no need for adapters, it provides seamless integration with 4L amber bottles. This cap features a polypropylene shell and PTFE core, along with essential fittings and an air check valve, making it a reliable choice for scientific environments.
Waters Corp Tubing Assembly, Mixer Manifold to i2V
ACQUITY H-Class QSM Mixer Manifold to I2V Tube assembly
Waters Corporation Transducer Assembly, Head Mounted, 15KPSI, UPLC System
This pressure transducer assembly is designed as a replacement component for UPLC systems. It mounts directly onto the pump head and is compatible with ACQUITY and nanoACQUITY solvent managers.
- Designed for head-mounted installation on pump heads.
- Provides 15KPSI pressure capability.
- Suitable for UPLC systems.
- Utilized on compatible solvent managers.
Waters Corp Waters Bottle Cap, 1.00 in Neck, Polyethylene, 1 L, 4/pk
This polyethylene cap is designed for 1 L solvent bottles to prevent the free exchange of atmospheric gases, while accommodating various lines for fluid transfer.
- Designed for 1 L solvent bottles.
- Prevents free exchange of atmospheric gases with helium.
- Does not sustain internal pressure build-up.
- Features three holes for tubing.
- Accommodates a helium inlet line.
- Accommodates a helium exhaust line.
- Accommodates a solvent inlet line.
- Constructed from polyethylene.
- Compatible with 1.00 in neck bottles.
- Supplied in packs of four.
- Suitable for HPLC systems.
- Designed for tubing with 1/8 in OD.