Gas Cylinder Supports
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger 16N054 is a 1/2 HP, 115V, 1725 RPM, 56C Frame, Open Drip Proof, Single Phase, Ball Bearing, Electric Motor. It has a NEMA standard 56C frame with a 1/2" diameter shaft and 1-1/4" long. The motor is totally enclosed, fan cooled (TEFC) with a cast iron frame and end bells. It operates on 115V, 60Hz single phase power with a full load current of 7.2 Amps. The motor is rated for continuous duty applications.
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger 16N021 is a 3M Novec 1230 Clean Agent Fire Extinguisher that provides fast fire suppression for Class A, B, and C fires. This UL rated, 2.5 lb extinguisher uses Novec 1230 fluid which leaves no residue and is ideal for protecting sensitive electronics. It features a steel cylinder with red powder coat finish, discharge range of 9-15 ft, and discharge time of 9 seconds. The extinguisher comes with wall mounting bracket and has a gross weight of 3.75 lbs.
Grainger Calibration Gas 116L 3-Gas Mix
The GASCO Calibration Gas - Nitrogen is a high purity nitrogen gas used for calibration and testing of gas detection equipment. It comes in a 103L cylinder with 99.998% nitrogen. The cylinder has a CGA 580 outlet connection and is rated for pressures up to 3000 psig. This calibration gas meets standards set by the National Institute of Standards and Technology for use in calibration and bump testing gas detectors. The cylinder should be stored and used in accordance with safety regulations for compressed gas cylinders. This is a high quality nitrogen gas for reliable calibration of gas detection systems.
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger 16N066 is a 16 oz. dead blow plastic hammer with a 2-1/2 inch diameter striking face. It has a hollow head filled with steel and lead shot to prevent rebound and absorb shock. The handle is made of fiberglass reinforced nylon for durability. This hammer allows you to strike delicate surfaces like aluminum, plastic or glass without damage. It is well-suited for automotive, industrial and construction applications. The hammer measures 14 inches long overall and weighs 1.4 lbs.
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger 16N051 is a 1/2 HP, 115V, 1725 RPM, 56C Frame, Open Drip Proof, Single Phase, Ball Bearing, Electric Motor. It has a NEMA standard 56C frame with a 1.15 service factor. The motor is thermally protected and rated for continuous duty applications. It features a cast iron frame, end brackets and conduit box. The 16N051 has a Class B insulation and standard starting torque. This general purpose motor can be used for various industrial, commercial and residential applications.
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger Approved Calibration Gas is a calibration gas cylinder that contains a 34L, 99.995% pure nitrogen gas blend. It comes equipped with a CGA 580 valve connection and is designed for instrument calibration and other analytical, industrial, and laboratory applications. This disposable cylinder has a capacity of 103 ft3 and a maximum allowable working pressure of 2265 psig at 70°F. The cylinder meets DOT 39 specifications and comes with a hydrostatic test date stamped on the shoulder.
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger Portable Gas Detector Calibration Kit is designed for calibrating and bump testing portable gas detectors. The kit includes calibration gas cylinders, regulators, hoses, adapters, and carrying case. Calibration gases offered include combustible gas, O2, CO, H2S, SO2, NO2, Cl2, NH3, and more. Cylinders contain 34L of gas mixture at standard pressure. Compatible with most brands including BW, Draeger, GMI, Industrial Scientific, MSA, RKI, and Scott Safety. Allows calibration of LEL, O2, toxic and other sensors. Provides an organized and efficient way to calibrate and bump test gas detectors per manufacturer recommendations.
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger 16N060 is a 16 oz. dead blow plastic hammer with a 2-1/2 inch diameter striking face. It has a hollow head filled with steel and lead shot to prevent rebound and absorb shock. The hammer has a fiberglass handle that provides durability. This hammer allows the user to deliver heavy blows without marring the surface and is well-suited for assembling delicate materials or working in tight spaces. The hammer weighs approximately 1.1 lbs.
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger 16N061 is a 1/4 HP, 115V, 60Hz, single phase, open drip proof motor with a 48 frame size. It has a 1.15 service factor, 1075 RPM at full load speed, and manual overload protection. The motor is thermally protected and has a NEMA standard C face with a 5/8" diameter shaft. It can be used for various light industrial applications.
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger 16N031 is a 3/4 HP, 115V, 1725 RPM, 56C Frame, Open Drip Proof, Single Phase, Ball Bearing, Electric Motor. It has a NEMA standard 56C frame with a 1.15 service factor. The motor is thermally protected and rated for continuous duty applications.
Grainger Calibration Gas 116L 3-Gas Mix
The GASCO Calibration Gas - Nitrogen is a high purity nitrogen gas used for calibration and testing of gas detection equipment. It comes in a 103L cylinder with 99.998% nitrogen. The cylinder has a CGA 580 outlet connection and pressure of 2000 psig. The gas meets ISO 6141 standards and has a 2 year shelf life. Nitrogen is non-flammable, non-toxic and inert. This calibration gas is useful for checking nitrogen levels or calibrating nitrogen sensors.