Flash Chromatography Cartridges
Ace Glass, Inc. 10mm ID 18" 24/40 epoxy coated flash chromatography column with porosity B filter disc.
10mm I.D., 36mL epoxy coated chromatography column with a 24/40 standard taper joint at the top, and a 2mm bore 1:5 taper solid PTFE stopcock plug at the bottom of the column. Column has an effective length of 460mm, and is supplied with a porosity B (70-100 micron) fritted disc sealed near the bottom of the tube.
Ace Glass, Inc. 50mm ID 10" 50/30 epoxy coated flash chromatography column.
50mm I.D., 10 simple absorption flash chromatography column for rapid preparative separations with moderate resolution. Allows separations of samples from 0.01 to 10.0g in 10-15 minutes. Column is epoxy coated and has 50/30 joints.
Sorbent Technologies Inc Flash Cartridges, Granular Silica Gel, Premium Rf, 60A, 20-45um, 40g, 12/pk
Purity™ Flash Cartridges are superior because they are packed with Premium Rf™ Silica Gel. The porosity is 60A, particle distribution is 20-45um, bed mass is 40g, and quantity is 12/pk. Sorbtech's packing technique & Premium Rf's narrow particle distribution results in a uniform packed bed. The benefits are no channeling, higher resolution, decrease in backpressure, faster flow, and faster run time. Additionally, the small pore volume allows for more silica gel per column volume leading to greater loadability and less solvent use. Finally, the high purity silica gel (minimal surface metals) reduces mixed-mode interactions (no peak tailing or resolution loss). The polypropylene cartridge has standard luer-lock end fittings and is spin-welded (leak-free) allowing higher pressures up to 400 psi. The cartridges are compatible with all flash chromatography systems.
Sorbent Technologies Inc Flash Cartridges, Granular Silica Gel, Premium Rf, 60A, 40-75um, 25g, 12/pk
Purity™ Flash Cartridges are superior because they are packed with Premium Rf™ Silica Gel. The porosity is 60A, particle distribution is 40-75um, bed mass is 25g, and quantity is 12 per pack. Sorbtech's packing technique and Premium Rf's narrow particle distribution results in a uniform packed bed. The benefits are no channeling, higher resolution, decrease in backpressure, faster flow, and faster run time. Additionally, the small pore volume allows for more silica gel per column volume leading to greater loadability and less solvent use. Finally, the high purity silica gel (minimal surface metals) reduces mixed-mode interactions (no peak tailing or resolution loss). The polypropylene cartridge has standard luer-lock end fittings and is spin-welded (leak-free) allowing higher pressures up to 400 psi. The cartridges are compatible with all flash chromatography systems.
Teledyne ISCO, Inc REDISEP GOLD SILICA GEL DISPOSABLE FLASH COLUMNS, 120 GRAM (PACKAGE OF 6)
RediSep Rf Gold Normal-Phase Silica
Ace Glass, Inc. 41mm flash chromatography column only, epoxy coated, porosity B, #25 Ace-Thred™;
41mm flash chromatography column only, epoxy coated, porosity B, #25 Ace-Thred™;
Biotage Sfär HMN-R Samplet 200 to 400g Column - 6/pacl
Creating dried, adsorbed samples will improve the separation performance on any cartridge. Biotage Samplet are designed for quick and convenient loading of concentrated samples.After the sample has been applied to the Samplet, the solvent is allowed to evaporate. The Samplet is then inserted into the Biotage Sfär Duo columns and you are ready to go.Samplets also are used as guard columns for Biotage Sfar C18, Biotage Sfar Bio C18 and Biotage Sfar Bio C4 columns.These Samplets are compatible with 200 to 400 gram columns and contain approximately 30 grams of Biotage ISOLUTE HM-N (diatomaceous earth) sorbent material. Shipped in packs of 6.
Biotage Sfär HMN-R Samplet 50 to 120g Column - 20/pack
Creating dried, adsorbed samples will improve the separation performance on any cartridge. Biotage Samplet are designed for quick and convenient loading of concentrated samples.After the sample has been applied to the Samplet, the solvent is allowed to evaporate. The Samplet is then inserted into the Biotage Sfär Duo columns and you are ready to go.Samplets also are used as guard columns for Biotage Sfar C18, Biotage Sfar Bio C18 and Biotage Sfar Bio C4 columns.These Samplets are compatible with 50 to 120 gram columns and contain approximately 10 grams of Biotage ISOLUTE HM-N (diatomaceous earth) sorbent material. Shipped in packs of 20.
Ace Glass, Inc. 25mm ID 18" 35/20 epoxy coated flash chromatography column with porosity B filter disc.
25mm I.D., 18 simple absorption flash chromatography column for rapid preparative separations with moderate resolution. Allows separations of samples from 0.01 to 10.0g in 10-15 minutes. Column is epoxy coated and has 35/20 joints. Includes porosity B filter disc.