Cleanroom Gloves
Cleanroom gloves are intended for use in cleanrooms and controlled environments, including, but not limited to, microelectronic, semiconductor, biotechnology, pharmaceutical, medical device, laboratory, research, chemical, life sciences, and healthcare. Designed to prevent particulate contamination, cleanroom gloves are manufactured, washed, and packaged in a cleanroom environment and meet stringent industry standards and requirements.
Cleanroom gloves are intended for a single use and are constructed of nitrile, latex, neoprene, polychloroprene, vinyl, or polyisoprene material. They are assigned a class and ISO rating and can be sterile or non-sterile, depending on working conditions. Cleanroom gloves are available in pair-packed, hand-specific, or ambidextrous variations and range from 9 inches to 24 inches in length with 12 inches being the standard length. Sizes range from X-small through 2X-large and are sometimes displayed in numeric form (sizes 5 through 11).
The following criteria must be considered when selecting the appropriate cleanroom gloves:
- Particle count: Refers to the number of particle contaminants that come off the gloves
- Extractable count: Number of elements extracted from the gloves in an immersion test
- Clean class: Gloves are carefully laundered, dried, tested and packaged to ensure the particle count is compatible with the cleanroom environment where they will be used
Regulatory compliance details can be obtained at the individual product level.
- (28)
- (6)
- (46)
- (1)
- (10)
- (40)
- (39)
- (49)
- (40)
- (50)
- (42)
- (46)
- (108)
- (4)
- (105)
- (108)
- (103)
- (64)
- (79)
- (28)
- (24)
- (20)
- (60)
- (270)
- (16)
- (6)
- (5)
- (362)
- (12)
- (586)
- (296)
- (4)
- (229)
- (44)
- (494)
- (39)
- (25)
- (1)
- (33)
- (25)
- (43)
- (298)
- (122)
- (362)
- (26)
Filtered Search Results
Hourglass International™ HandPRO™ 6100 Series Clean Class 100 Nitrile Gloves
SureTRACE
Supports traceability with guaranteed access to certificates and proactive change notifications.
Learn More
Supports traceability with guaranteed access to certificates and proactive change notifications.
Learn More
HandPRO™ 6100 Clean Class 100/ISO 5 gloves are made from accelerator-free nitrile for reduced risk of type IV chemical allergies. The textured, 16 in. elbow-length gloves don easily and fit securely and comfortably over cleanroom garments without undue binding at the cuff.
| Tensile Strength | 14 MPa min. |
|---|---|
| Disposable | Single-use |
| Length (Metric) | 40 cm |
| Packaging Type | Double-Bagged |
| Color | White |
| Length (English) | 16 in. |
| Material | Nitrile |
| Powdered | Powder Free |
| Sterility | Non-sterile |
| Hand | Ambidextrous |
| Finger Thickness (Metric) | 0.21 mm |
| Thickness (Metric) | 0.21 mm |
| Accelerator Free | Yes |
| Series | HandPRO™ 6100 |
| Certifications/Compliance (Europe) | EN 420 |
| Cleanroom Class | Class 100 (ISO 5) |
| Latex Free | Yes |
| Exterior Finish | Fully Textured |
| AQL | 1.5 |
| Palm Thickness (Metric) | 0.18 mm |
Kimtech™ Pure G5 Sterile Latex Gloves
Sterile, hand-specific latex gloves provide sensitive and dextrous protection in Class 100/ISO 5 or higher cleanroom environments.
| Disposable | Single-use |
|---|---|
| Length (Metric) | 30.5 cm |
| Color | Natural |
| Length (English) | 12 in. |
| Material | Latex |
| Powdered | Powder Free |
| Sterility | Sterile |
| Hand | Specific |
| Thickness (Metric) | 0.20 mm |
| Series | Kimtech™ Pure G5 |
| Certifications/Compliance (Europe) | PPE Cat III, EN ISO 374-1:2016, EN 374-4:2003, EN ISO 374-5:2016 |
| Cleanroom Class | Class 100 (ISO 5) |
| Exterior Finish | Fully Textured |
| Certifications/Compliance | ASTM D3577,IEST-RP-CC005 |
| AQL | 1.5 |
Ansell AccuTech™ 91-300 Latex Gloves
Hand-specific, low particle glove offer a combination of cleanliness and safe handling for controlled environments.
| Tensile Strength | 20 MPa |
|---|---|
| Disposable | Single-use |
| Length (Metric) | 30.5 cm |
| Color | Natural |
| Length (English) | 12 in. |
| Material | Latex |
| Powdered | Powder Free |
| Sterility | Non-sterile |
| Hand | Specific |
| Finger Thickness (Metric) | 0.24 mm |
| Thickness (Metric) | 0.24 mm |
| Series | AccuTech™ 91-300 |
| Certifications/Compliance (Europe) | CE 0493, EN 420:2003 + A1:2009, EN ISO 374-1:2016, EN ISO 374-5:2016 |
| Exterior Finish | Partially Textured |
| Certifications/Compliance | ASTM D5712-95 |
| Manufacturing/QMS Audit Standards | ISO 9001:2015 |
| AQL | 1.5 |
| Palm Thickness (Metric) | 0.21 mm |
Ansell Microflex™ HSCE4 Sterile Nitrile Gloves
Provide exceptional dexterity, tactile sense, fit, feel and comfort
| Length (Metric) | 30.5 cm |
|---|---|
| Color | White |
| Cleanroom Class | Class 10 (ISO 4) |
| Length (English) | 12 in. |
| Material | Nitrile |
| Powdered | Powder Free |
| Certifications/Compliance | AAMI, ASTM, IEST, ISO9001, AQL 1.5 |
| Sterility | Sterile |
| Hand | Specific |
Ansell BioClean™ Prelude BPSL Sterile Latex Cleanroom Gloves
Powder free, sterile latex gloves offer comfort for prolonged use. Recommended for Class 10/ISO 4 cleanroom environments.
| Length (Metric) | 30 cm |
|---|---|
| Color | Natural |
| Length (English) | 12 in. |
| Material | Latex |
| Sterility | Sterile |
| Finger Thickness (Metric) | 0.20 mm |
| Thickness (Metric) | 0.20 mm |
| Series | BioClean™ Prelude BPSL |
| Certifications/Compliance (Europe) | CE 0598, EN 420:2003 + A1:2009, EN 421:2010, EN ISO 374-1:2016, EN ISO 374-5:2016, EN 455 Part 2, Food Contact, Category III |
| Cleanroom Class | Class 10 (ISO 4) |
| Exterior Finish | Fully Textured |
| Certifications/Compliance | CE 0598, Food Contact, ISO 9001:2015, ISO 9001:2008, Category III, 1.5 AQL |
| Manufacturing/QMS Audit Standards | ISO 9001:2015, ISO 9001:2008 |
| AQL | 1.5 |
| Palm Thickness (Metric) | 0.17 mm |
Ansell Kimtech™ Pure G3 EvT Nitrile Gloves
Non-sterile, nitrile gloves designed to have low particles and extractables and are cleaned to meet the needs of a ISO Class 3 or higher critical environment.
| Length (Metric) | 30.5 cm |
|---|---|
| Color | White |
| Length (English) | 12 in. |
| Material | Nitrile |
| Sterility | Non-sterile |
| Hand | Ambidextrous |
| Finger Thickness (Metric) | 0.12 mm |
| Thickness (Metric) | 0.12 mm |
| Series | Kimtech™ Pure G3 EvT |
| Cleanroom Class | Class 1 (ISO 3) |
| Latex Free | Yes |
| Exterior Finish | Fully Textured |
| Certifications/Compliance | ASTM D5151 |
| AQL | 1.5 |
Kimtech™ Pure G5 Latex 12 in. Cleanroom Gloves
G5 non-sterile 12 in. latex gloves provide enhanced tactile sensitivity and performance. Recommended for Class 100/ISO 5 or higher critical environments.
| Length (Metric) | 30.5 cm |
|---|---|
| Color | Natural |
| Length (English) | 12 in. |
| Material | Latex |
| Powdered | Powder Free |
| Sterility | Non-sterile |
| Hand | Ambidextrous |
| Thickness (Metric) | 0.20 mm |
| Series | Kimtech™ Pure G5 |
| Certifications/Compliance (Europe) | Cat III according to (EU) 2016/425, EN ISO 374-1:2016, EN 374-4:2014, EN ISO 374-5:2016 |
| Cleanroom Class | Class 100 (ISO 5) |
| Latex Free | No |
| Exterior Finish | No Texture |
| Certifications/Compliance | ASTM D3578 |
| AQL | 1.5 |
Ansell Kimtech™ Pure G5 Latex 10 in. Cleanroom Gloves
G5 non-sterile latex gloves measure 10 in. in length and feature textured palms and fingertips for a secure grip. Recommended for Class 100/ISO 5 or higher critical environments.
| Length (Metric) | 25.5 cm |
|---|---|
| Color | Natural |
| Length (English) | 10 in. |
| Material | Latex |
| Powdered | Powder Free |
| Sterility | Non-sterile |
| Hand | Ambidextrous |
| Thickness (Metric) | 0.20 mm |
| Series | Kimtech™ Pure G5 |
| Certifications/Compliance (Europe) | Cat III according to (EU) 2016/425, EN ISO 374-1:2016, EN 374-4:2014, EN ISO 374-5:2016 |
| Cleanroom Class | Class 100 (ISO 5) |
| Latex Free | No |
| Exterior Finish | No Texture |
| Certifications/Compliance | ASTM D3578 |
| AQL | 1.5 |
Ansell MICROFLEX™ HSCE4-879 Sterile Latex Gloves
Powder free latex gloves are hand-specific ro reduce stress and strain. Recommended for Class 10 /ISO 4 cleanrooms.
| Disposable | Single-use |
|---|---|
| Length (Metric) | 30.5 cm |
| Color | Natural |
| Length (English) | 12 in. |
| Material | Latex |
| Powdered | Powder Free |
| Sterility | Sterile |
| Hand | Specific |
| Finger Thickness (Metric) | 0.20 mm |
| Thickness (Metric) | 0.20 mm |
| Series | MICROFLEX™ HSCE4-879 |
| Certifications/Compliance (Europe) | EN 455 1-4 |
| Cleanroom Class | Class 10 (ISO 4) |
| Exterior Finish | No Texture |
| Certifications/Compliance | AAMI,ASTM D6319-10,IEST-RP-CC005.3,FTMS 101-C, 4046 |
| Manufacturing/QMS Audit Standards | ISO2004, ISO9001 |
| AQL | 1.5 |
| Palm Thickness (Metric) | 0.15 mm |
Ansell BioClean™ Sterile Polychloroprene Cleanroom Gloves
Ansell™ BioClean™ Sterile Polychloroprene Cleanroom Gloves are powder and latex-free
Ansell Kimtech™ Pure G3 Latex Cleanroom Gloves Hand-Specific Pairs
G3 non-sterile 12 in. latex gloves are packaged in hand-specific pairs. Recommended for Class 10/ISO 4 or higher cleanroom environments.
| Thickness (Metric) | 0.20 mm |
|---|---|
| Series | Kimtech™ Pure G3 |
| Length (Metric) | 30.5 cm |
| Color | Natural |
| Cleanroom Class | Class 10 (ISO 4) |
| Length (English) | 12 in. |
| Latex Free | No |
| Material | Latex |
| Exterior Finish | Fully Textured |
| Certifications/Compliance | ASTM D3578,IEST-RP-CC005.2 |
| AQL | 1.5 |
| Sterility | Non-sterile |
| Hand | Ambidextrous |
Ansell BioClean™ Biotac BIOTAC Nitrile Gloves
Latex-free, powder free cleanroom gloves are flexible and resistant to a wide range of chemicals.
| Length (Metric) | 30.5 cm |
|---|---|
| Color | White |
| Length (English) | 12 in. |
| Material | Nitrile |
| Powdered | Powder Free |
| Sterility | Non-sterile |
| Hand | Ambidextrous |
| Finger Thickness (Metric) | 0.17 mm |
| Thickness (Metric) | 0.17 mm |
| Series | BioClean™ Biotac BIOTAC |
| Certifications/Compliance (Europe) | CE 0598, EN 420:2003 + A1:2009, EN 421:2010, EN ISO 374-1:2016, EN ISO 374-5:2016, EN 455 Part 2, Food Contact, Category III |
| Cleanroom Class | Class 100 (ISO 5) |
| Latex Free | Yes |
| Exterior Finish | Partially Textured |
| Manufacturing/QMS Audit Standards | ISO 9001, PPE Regulation 2016 425 Module D |
| Palm Thickness (Metric) | 0.11 mm |
Ansell BioClean™ Nitrimax BNMS 24 in. Sterile Nitrile Cleanroom Gloves
Extended length gloves offer full arm protection, provide comfort and are resistant to a range of chemicals. Recommended for Class 10/ISO 4 critical environments.
| Length (Metric) | 60 cm |
|---|---|
| Color | White |
| Length (English) | 24 in. |
| Material | Nitrile |
| Sterility | Sterile |
| Finger Thickness (Metric) | 0.18 mm |
| Thickness (Metric) | 0.18 mm |
| Series | BioClean™ Nitramax BNMS |
| Certifications/Compliance (Europe) | CE 0598, EN 420:2003 + A1:2009, EN 421:2010, EN ISO 374-1:2016, EN ISO 374-5:2016, EN 455 Part 2, Food Contact, Category III |
| Cleanroom Class | Class 10 (ISO 4) |
| Exterior Finish | Fully Textured |
| Certifications/Compliance | CE 0598, Food Contact, ISO 9001:2015, Category III |
| Manufacturing/QMS Audit Standards | ISO 9001, PPE Regulation 2016 425 Module D |
| AQL | 1.5 |
| Palm Thickness (Metric) | 0.15 mm |
| Length (Metric) | 30.3 cm |
|---|---|
| Color | White |
| Length (English) | 11.8 in. |
| Powdered | Powder Free |
| Sterility | Non-sterile |
Ansell Kimtech™ G3 NxT Nitrile Cleanroom Gloves
Latex and silicone-free non-sterile cleanroom gloves for delicate applications. The slick finishing, with textured fingertips and static dissipative material, ensures dextrous contamination control.
| Disposable | Single-use |
|---|---|
| Length (Metric) | 30.5 cm |
| Color | White |
| Length (English) | 12 in. |
| Material | Nitrile |
| Powdered | Powder Free |
| Sterility | Non-sterile |
| Hand | Ambidextrous |
| Finger Thickness (Metric) | 0.18 mm |
| Thickness (Metric) | 0.18 mm |
| Accelerator Free | Yes |
| Certifications/Compliance (Europe) | PPE Cat III according to Regulation (EU) 2016/425, EN ISO 374-1 Type C Chemical Splash Protection, EN 374-4 Resistance to degradation by chemicals, EN ISO 374-5 Micro Organism and Virus Protection |
| Cleanroom Class | Class 1 (ISO 3) |
| Latex Free | Yes |
| Exterior Finish | Partially Textured |
| Certifications/Compliance | ISO 3 |
| Manufacturing/QMS Audit Standards | EN ISO 21420:2020 |
| AQL | 1.5 |
| Palm Thickness (Metric) | 0.14 mm |