Maintenance Lubricants and Penetrating Fluids
Electron Microscopy Sciences Carbon Adhesive Tabs, 9 mm
Two sides of thick conductive adhesive (45 micron on each side) with the center conductive core film (35 micron). Firm, smooth surface SEM including GSR. 125 um thick. No gas out-gassing. Traces of Si, Sb, S, Fe, Mg, Na.
Diameter: 9 mm
Electron Microscopy Sciences Conductive Adhesive Tabs, 2
An affordable double-sided conductive tab for all SEM samples, these 1/2" (12 mm) diameter conductive tabs work like carbon adhesive tabs. Just remove tab from the roll, press onto surface where you want the film, lift"tab" and peel it off. The tabs can be cut to desired size before being removed from its backing, for use on smaller samples.
They have a smoother background (over 99% transparent to EDS), high strength adhesive, a thickness of only 0.002", and better particle detection. Contains a trace of nickel (<0.6%) and copper (<0.3).
Grainger Multipurpose Grease Cartridge 14 oz
Sta-Lube Multi-Purpose Grease is a lithium complex, NLGI Grade 2 grease formulated for multi-purpose applications. It provides excellent resistance to water washout and spray-off, has a dropping point over 500°F, and protects against rust and corrosion. This 14 oz cartridge can be applied using a standard grease gun for lubricating bearings, bushings, universal joints and chassis. It's recommended for use in industrial, fleet, marine, farm and automotive applications.
Electron Microscopy Sciences Scotch™ Conductive Copper Tape, 1/4" wide 18 YD
The conductive tape is used in scanning electron microscopy specimen mounting. Copper foil tape (Scotch 1181), with conductive adhesive, 3" core and foil thickness: 1.4 mils. Total thickness: 3mils (.076mm), adhesion: 35oz/ln (3.81 N/10mm), electrical resistance: .005ohm/in(.032ohm/cm)
Width: 1/4"
Electron Microscopy Sciences Epo-Tek H20S Adhesive 1 OZ
Epo-Tek H20S is a modified version of Epo-TekH20E. Epo-Tek H20S is a highly reliable, two component, silver-filled epoxy with a smooth, thixotropic consistency (mixing ratio 1:1). This modified version offers high electrical conductivity, short curing cycles, proven reliability, and the convenient mix ratio, Epo-Tek H20S is extremely simple to use. Epo-Tek H20S pot life is 2.5 days and shelf life is one year when store at room temperature.
Electron Microscopy Sciences Apiezon High Vacuum Grease Type L 25 GR
Grease L is a petroleum hydrocarbon grease with a very low vapor pressure (@20 degree C of 8x10-11 torr) and high vacuum grade. It contains no additives. Type L is widely used in the stationary phase of gas liquid chromatography, and may be used on all ground joints in a vacuum system (not for stopcocks).
Solubility: in Ethanol at 20 degree C-0.003%; 60 degree C-0.005%; 100 degree C-0.011%; 150 degree C-0.011%.
Grease L softens and melts at about 47 degree C and it is not recommended for joints where temperatures exceed more than 30 degree C in use. Working temperatures range is between 10-30 degree .
Electron Microscopy Sciences Label & Adhesive Remover 4.5 OZ
The first label and adhesive remover to really work. To use, gently rub the label, wipe away the excess material from the surface, wait for 30 seconds then simply peel off the label, leaving a clean surface.
Cole-Parmer Fluke Calibration 5010-1L Silicone Oil 1 Liter for calibrations
Various parts and accessories to change capacity, testing type, accuracy, or portability for your Fluke Calibration calibrator.
