Drills and Drill Bits
Grainger Sq. End Mill Single End Carb 11/64
The Grainger Approved Square End Mill Single End Carbide is a milling cutter with a square end for machining slots, keyways, pockets, and right angle shoulders. It has a 1/2" shank diameter, 1-1/2" overall length, 1/2" cutting diameter, and 2 flute count. The end mill is made of solid carbide for wear resistance and has a TiAIN coating to reduce friction and heat. It can machine steels, cast iron, stainless steel, aluminum, copper, brass, bronze, plastics, and other non-ferrous materials. This durable and precise carbide end mill is well-suited for high production milling applications.
Grainger Sq. End Mill Single End Carb 3/16
The Grainger 14M402 is a 14-inch diameter, two-blade, right-hand rotation, aluminum propeller for small aircraft. It has a pitch of 40 inches and is designed for engines up to 65 horsepower. The propeller is constructed from heat treated aluminum alloy for strength and durability. It comes with the propeller hub installed and is balanced for vibration-free operation. The propeller weighs approximately 5 lbs and has a glossy silver finish. With its aerodynamic design, the 14M402 provides efficient thrust while minimizing noise. This fixed-pitch propeller requires no maintenance and is easy to install on compatible aircraft.
Grainger Ball End Mill Single End 0.60mm Carbide
The Micro 100 Ball End Mill Carbide is a 2-flute ball end mill made of solid carbide with a TiAlN coating. It has a 1/4" shank diameter, 1/2" cutting diameter, and 2" overall length. The ball end geometry allows milling of 3D contoured surfaces. This end mill is designed for general purpose milling in most material groups like steel, stainless steel, cast iron, aluminum, and plastics. It provides good chip evacuation and can mill up to 50% radial engagement and 25% axial engagement. The TiAlN coating reduces heat and friction for faster cutting. The end mill has center cutting geometry for plunge cuts into material. It is manufactured in the USA by Micro 100 Tooling.
Grainger Micro Drill 1/8 Carbide
The Micro 100 Micro Drill Bit is a 1/8 inch diameter high speed steel drill bit with a straight shank. It has a 135 degree split point tip for faster penetration and cleaner holes. The bit is made in the USA and has an overall length of 2-1/2 inches. It can drill through materials like steel, cast iron, aluminum, copper, brass, plastic and wood. The bit features a bright finish for increased workpiece visibility.
Grainger End Mill Kyocera MEC 0500S50011 0.5000
The Kyocera 61NV71 is a 4 flute end mill made of micrograin carbide with a TiAIN coating. It has a 1/2" shank diameter, 1-1/2" overall length, and 3/4" cutting diameter. The end mill features variable helix flutes for reduced harmonics and chatter and high positive radial and axial rake angles for easy chip evacuation. Recommended cutting parameters are 12,000-18,000 RPM with feed rates from 0.004-0.012 IPR depending on material. It is well-suited for slotting, profiling, and facing in steels, stainless steels, cast iron, aluminum, and other non-ferrous metals.
Grainger End Mill Kyocera MEC 16S1211T 16mm
The Kyocera 170HL6 is a 1/2" diameter, 4 flute, high speed steel end mill with a 1-1/2" overall length. It has a TiAlN coating for increased hardness and heat resistance. The end mill has a 30 degree helix angle and is center cutting for plunge cuts. It is designed for slotting, profiling, and contouring in steels, cast iron, aluminum, and other non-ferrous metals at speeds up to 325 SFM. The end mill has a tolerance of +/- .0005" and comes with a 30 day warranty from the manufacturer.
Grainger Threaded Shank Drill #30 Cobalt
The Grainger 13/16" Threaded Shank Drill Bit is made of high speed steel and has a black oxide finish for durability. It features a 135 degree split point tip for faster penetration and reduced walking. The bit has a 1/2" hex shank to fit power drills. It can drill through metal, wood, and plastic. Overall length is 5-1/2". Made in the USA.
Grainger Threaded Shank Drill #13 Cobalt
The Grainger 13/16" Threaded Shank Drill Bit is made of high-speed steel and has a black oxide finish for durability. It features a 135 degree split point tip for faster penetration and reduced walking. The bit has a 1/2" hex shank to fit power drills. It can drill through metal, wood, and plastic. Overall length is 5-1/2". Made in the USA.
Grainger Threaded Shank Drill #40 Cobalt
The Grainger 16W805 Threaded Shank Drill Bit is a high-speed steel bit with a 1/4" hex shank and #7 screw machine length. It has a 118 degree point angle and is uncoated with an overall length of 1-1/2". The bit diameter is 5/16" and it can drill through metal, wood, and plastic. The threaded shank allows it to be used in drill presses. This is a general purpose bit good for commercial and industrial applications.
Grainger Threaded Shank Drill #30 Cobalt
The Grainger 30-16W808 Threaded Shank Drill Bit is a high-speed steel bit with a 1/4" hex shank and a #7 screw point tip. It has a length of 2-1/2" and is designed for use in metal, wood, and plastic. The bit features a bright finish and a 135 degree split point for faster penetration and cleaner holes. Made in the USA, this threaded shank drill bit is ideal for power drills and drill presses.
Grainger Drill Mill 3/16 Carbide Bright
The WIDIA HANITA 2NHF7 is a carbide drill mill with a diameter of 0.3937 inches (10mm) and an overall length of 2.559 inches (65mm). It has a TiAlN coating and can be used for a variety of materials including steel, cast iron, stainless steel, hardened steel, titanium alloys, nickel alloys, and non-ferrous metals. The drill mill features a 135 degree split point tip geometry for reduced thrust and chatter-free cutting. It has internal coolant capability and is balanced to 25,000 RPM. The 2NHF7 is manufactured in Israel by WIDIA HANITA Cutting Tools Ltd.