Wrenches
Perkin Elmer US LLC Series II Ion Lens Removal Tool for ELAN 6x00/9000/DRCs (Post-1998/Pre-2005)
Flexible shaft driver with removable 2 mm Hex Ball Bit for use with ELAN 6x00, 9000, DRC-e and DRC II ICP-MS series instruments manufactured between 1998 and 2005.
Grainger Hex Head Plug Forged Steel 2 in MNPT
The Anvil Hex Head Plug is a forged steel plug with a hex head drive for use in sealing pipe openings. It has a pressure rating of 150 psi and temperature rating of 650°F. The plug has a standard pipe thread and is available in sizes ranging from 1/8 inch to 2 inches. It is made from hot rolled and completely annealed steel for strength and machinability. The heavy hex head drive allows use with standard wrenches for installation and removal. This plug provides an economical way to temporarily or permanently seal openings in threaded pipe systems.
Grainger Hex Bushing Forged Steel 1 x 1/4 in
The Anvil Hex Bushing is a forged steel bushing with a hexagonal shape. It has a 1-1/4 inch nominal pipe size and is made from 1045 carbon steel. The bushing has a Rockwell hardness of B80-90. It is designed for use as a bushing in hexagonal holes and has a pressure rating of 2,000 PSI at 100 degrees Fahrenheit. The bushing measures 1.26 inches across the flats with an inside diameter of 1.25 inches and an outside diameter of 1.5 inches. It weighs approximately 0.2 pounds.
Grainger Hex Head Plug Forged Steel 1 1/2 in
The Anvil Hex Head Plug is a forged steel plug with a hex head drive for closing openings. It has a thread size of 3/4"-10, a plug diameter of 1", an overall length of 1-1/2", and is made from 1045 carbon steel. The hex head has a width of 1-1/8". This plug is designed for use in pipe fittings, valves, and other equipment to seal openings. It can withstand pressure up to 250 PSI and temperatures up to 650°F. The hex head allows the plug to be easily installed and removed using a wrench.