Temperature Controllers
Essendant Headline Sign Double-Sided Open/Closed Sign w/Plastic Push Characters 14 38x12 38
Headline Sign Double-Sided Open/Closed Sign w/Plastic Push Characters 14 38x12 38
Essendant Ampad Double Sheet Pads Pitman Rule Variation (Offset Dividing Line - 3 Left) 100 White 8 5x11 75 Sheets
Ampad Double Sheet Pads Pitman Rule Variation (Offset Dividing Line - 3 Left) 100 White 8 5x11 75 Sheets
Essendant DEODORANTODOR CONTROL
Odor counteractant concentrate is specially formulated with a high fragrance load for maximum odor control Its versatility allows it to be used on hard surfaces carpet in foggers in mop water trigger sprayers and much more Can be used full strength for stubborn problem areas or diluted for lighter jobs Use it by itself or mixed with your favorite cleaner for a boost of fragrance Scent- Green Apple Physical Form- Liquid Application- Odor Control Volume Capacity- 32 oz
Genscript Corporation AmMag Quatro System Controlle
The AmMag Quatro is an automated solution for purification of large-scale high quality transfection-grade plasmids from i Escherichia coli /i cultures
Chemglass Life Sciences Dual Temperature Controller Only, J-Kem, Gemini, Type ""RTD"" (-400C to 200C)
Dual Temperature Controller Only, J-Kem, Gemini, Type "RTD" (-400C to 200C). J-Kem Scientific Gemini-2 dual temperature controller permits control of two independent reactions with digital displays for both channels. Each channel is 1200 Watts MAX (1800 Watts total), 15 Amps @ 120VAC, and features advanced microprocessor PID control algorithm. Channel one also has a 100 hour digital timer. Safety features include 100% solid state, double fused, audible error alarm, and over temperature circuitry that disconnects power if an over temperature condition occurs.PLEASE NOTE: THE TYPE T, J AND K CONTROLLERS ARE SUPPLIED COMPLETE WITH: (2) 1/8 DIAMETER X 12 LONG PTFE COATED THERMOCOUPLES, (2) 10FT COILED EXTENSION CORDS, AND (2) 14/20 PTFE THERMOCOUPLE ADAPTERS. THE RTD UNIT IS THE CONTROLLER ONLY.Specifications:Dimensions: 3.5" H x 7.75" W x 8.75" DPower: 15 Amps @ 120VAC, 1200 Watts MAX/Channel, 1800 Watts (Total)
Cole-Parmer Digi-Sense Variable-Voltage Output Controller; 5-100%, 120V/10A
This control is designed to regulate the input voltage through the selector knob on the unit. To operate plug a resistive load into the receptacle on the back of the unit, and adjust the control dial to the desired level. The higher the selected number on the dial, the higher the voltage and hotter the load will get. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.
Cole-Parmer Digi-Sense 2-Zone Temperature Controller; Type K, 120V/15A
These controllers are designed for controlling two independent temperature processes. and features modern control technology that produces greater temperature stability. The space saving design combines two controllers into one unit to maximize bench space. Each unit displays both the setpoint and process temperature. Auto-tune minimizes setpoint overshoot and feature the ability to learns your process producing greater stability. The controller also features an audible alarm function, and two panel mounted receptacles that accept three-prong plugs. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.
Chemglass Life Sciences J-Kem 150-K Temperature Controller Only, "K" Type
J-Kem 150-K Temperature Controller Only, "K" Type. THERMOCOUPLE TYPE (TEMPERATURE RANGE):T (-200 to 250°C), J (0 to 800°C), K (-50 to 1200°C)
Chemglass Life Sciences J-Kem Temperature Controller, Model 210, Type ""T"" (-200C to 250C), Complete
J-Kem Temperature Controller, Model 210, Type "T" (-200C to 250C), Complete. The Model 210 has 1200 Watts of power which is sufficient for heating mantles up to 5L in size along with most laboratory ovens and hot plates. Controller has the ability to display temperature without heating. The Model 210 controls temperature to within 0.1C of liquids from 1ul to 5L.PLEASE NOTE: THE TYPE T, J AND K CONTROLLERS ARE SUPPLIED COMPLETE WITH: 1/8 DIAMETER X 12 LONG PTFE COATED THERMOCOUPLE, 10FT COILED EXTENSION CORD, AND A 14/20 PTFE THERMOCOUPLE ADAPTER. THE RTD UNIT IS THE CONTROLLER ONLY.Specifications:Dimensions: 3.25" H x 5.25" W x 7.25" DPower: 10 Amps @ 120VAC, 1200 Watts
Chemglass Life Sciences J-Kem Temperature Controller, Model 260/T, Type ""T"" (-200C to 250C), Complete
J-Kem Temperature Controller, Model 260/T, Type "T" (-200C to 250C), Complete. The Model 260/T disconnects all output power it the process temperature exceeds the entered temperature by a user-specified amount, or following recovery from a power failure. The outputs remain disconnected until manually reset. Over temperature condition is signalled by an indicator lamp and audible alarm. The Model 260/T has 1800 Watts of power which is sufficient for heating mantles up to 22L. Controller has the ability to display temperature without heating. The Model 260/T is also equipped with a100 hour digital timer to turn heating ON or OFF when time has expired.PLEASE NOTE: THE TYPE T, J AND K CONTROLLERS ARE SUPPLIED COMPLETE WITH: 1/8 DIAMETER X 12 LONG PTFE COATED THERMOCOUPLE, 10FT COILED EXTENSION CORD, AND A 14/20 PTFE THERMOCOUPLE ADAPTER. Specifications:Dimensions: 3.25" H x 7.5" W x 9" DPower: 15 Amps @ 120VAC, 1800 Watts
Chemglass Life Sciences J-Kem Temperature Controller, Model 260/T, Type ""K"" (-50C to 1200C), Complete
J-Kem Temperature Controller, Model 260/T, Type "K" (-50C to 1200C), Complete. The Model 260/T disconnects all output power it the process temperature exceeds the entered temperature by a user-specified amount, or following recovery from a power failure. The outputs remain disconnected until manually reset. Over temperature condition is signalled by an indicator lamp and audible alarm. The Model 260/T has 1800 Watts of power which is sufficient for heating mantles up to 22L. Controller has the ability to display temperature without heating. The Model 260/T is also equipped with a100 hour digital timer to turn heating ON or OFF when time has expired.PLEASE NOTE: THE TYPE T, J AND K CONTROLLERS ARE SUPPLIED COMPLETE WITH: 1/8 DIAMETER X 12 LONG PTFE COATED THERMOCOUPLE, 10FT COILED EXTENSION CORD, AND A 14/20 PTFE THERMOCOUPLE ADAPTER. Specifications:Dimensions: 3.25" H x 7.5" W x 9" DPower: 15 Amps @ 120VAC, 1800 Watts
Chemglass Life Sciences 1/2" OD S.S. Support Rod, Bent 90°
1/2" OD S.S. Support Rod, Bent 90°. For use with the CG-3498 series of Temperature Monitors. CG-3498-03 1/2” OD rod, bent 90° is necessary when supporting a temperature monitor or controller to a reactor stand or laboratory hood lattice.
Chemglass Life Sciences Temperature Controller, J-Kem, Model 270, Type ""K"" (-50C to 1200C), Complete
Temperature Controller, J-Kem, Model 270, Type "K" (-50C to 1200C), Complete. J-Kem Scientific microprocessor temperature controller. Comes with a completely INDEPENDENT BACK UP controller to guard against accidents from equipment failure.The desired temperature is entered into the digital display of the setpoint controller which regulates heating. A high temperature limit is then entered into the second digital back-up. If the reaction reaches the setpoint of the second controller, power is shut off from the output circuit until the unit is manually reset. Both controllers independently monior the reaction temperature and in the event that one controller fails, the other takes over to prevent a accident.PLEASE NOTE: CONTROLLER IS SUPPLIED COMPLETE W/A DUAL ELEMENT 1/4 DIAMETER X 12 LONG PTFE COATED THERMOCOUPLE, A DUAL ELEMENT THERMOCOUPLE EXTENSION CORD AND A 14/20 PTFE THERMOCOUPLE ADAPTERSpecifications:Dimensions: 3.25" H x 7.5" W x 9" DPower: 15 Amps @ 120VAC, 1800 Watts
