Animal Surgical Equipment Accessories
Instech Stainless steel catheter / tubing coupler, 22ga x 8mm. Nonsterile. Package of 100.
The Instech SC22/8 is a stainless steel catheter coupler used to join implanted catheters to external infusion tubing. Sized at 22ga and 8mm in length, it provides a compact, low‑dead‑volume connection suitable for small‑animal infusion setups. The rounded edges help prevent tubing damage, and it is supplied non‑sterile in packages of 100 for laboratory use.
Features
- 22ga stainless steel straight catheter coupler
- 8mm length for compact catheter‑to‑tubing connections
- Rounded edges to minimize tubing wear
- Non‑sterile; packaged in sets of 100
- Used to connect implanted catheters to external infusion lines
Instech Two channel tether kit for rats. 12in spring tether, SIP22/4 injection port on striped line, 375/22PS swivel on clear line, 24in COEX tubing and luer stub. Sterile. Connects to VAHD115AB rat harnesses.
The Instech KVAHD115T is a complete tether kit designed for two-channel Vascular Access Harness™ (VAH™) systems in rats. It enables continuous access to one fluid channel through a swivel while providing a side port for intermittent manual access to a second channel. This sterile kit maintains a closed system to ensure catheter patency and animal safety during specialized research like bile sampling or simultaneous infusion and sampling.
Features
- Application: Continuous infusion and intermittent sampling for two-channel rat VAH™
- Compatibility: Specifically for use with the VAHD115AB two-channel rat harness
- Dimensions: 12in (30cm) spring tether with 24in (60cm) CoEx™ extension tubing
- Components: VAHD115T tether, SIP22/4 injection port, 375/22P swivel, and LS22 luer stub
Tube sets for Instech P720 peristaltic pumps, .031in ID silicone with .062in ID barb inlet and outlet (mates with 062 tubing). Package of 5, nonsterile.
The Instech P720/TS‑BS031SBS is a barb‑to‑barb tube set for P720 peristaltic pumps, built with .031in ID silicone tubing and .062in ID barb connectors to integrate easily with standard research tubing. Supplied non‑sterile in packs of five, these tube sets provide smooth, accurate fluid delivery for mid‑range low‑flow infusion and perfusion applications.
Features
- .031in ID silicone tubing for mid‑range P720 flow rates
- .062in ID barb inlet and outlet connectors
- Packaged in sets of five, non‑sterile
- Compatible with all P720 peristaltic pump models
- Ideal for controlled infusion and perfusion tasks
Instech Tether kit for rat infusion using Vascular Access Button™. 12 inch (30 cm) tether, 375/22PS 22ga swivel, 24in COEX tubing, luer stub. Sterile.
The Instech KVAB95T is a comprehensive tether kit designed for use with the VAB95BS-MRI one-channel rat Vascular Access Button™ (VAB™). This kit provides all the necessary components for continuous infusion outside of an MRI environment, maintaining a sterile and closed fluid path. By utilizing a twist-in connection rather than magnets, it ensures compatibility with the MRI-specific button design while providing the security needed for freely moving animal research.
Features
- Application: Continuous infusion kit for MRI-compatible rat buttons
- Compatibility: Specifically for use with the VAB95BS-MRI button system
- Dimensions: Includes a 12in (30cm) spring tether and 24in (60cm) CoEx tubing
- Components: Includes a VAB95T tether, 375/22P swivel, and a 22ga luer stub
- Design: Twist-in tether connection for secure, non-magnetic attachment
- Sterility: Provided sterile and ready for immediate laboratory use
Euthanex Rabbit/ Guinea Pig Nosecone
The Rabbit/Guinea Pig Nosecone is custom-designed for small animals, ensuring a tight fit and minimal dead space. This is a component part of the E-Z Anesthesia breathing devices. Nosecone includes rubber plug to close off gas supply when not in use.
Grainger Wheel Hub Kit 26 in
The Grainger Approved Wheel Hub Kit is a replacement hub assembly for the front wheels of a 2007-2013 Chevrolet Silverado 1500 2WD. It features a pre-assembled hub with wheel studs, wheel bearings, races, seals, and ABS sensor rings. This OE replacement kit allows for a direct bolt-on installation and restores proper wheel alignment and ABS sensor function. The components are designed to match the fit and performance of the original hub on the vehicle. This kit provides an economical repair solution when replacing worn or damaged wheel hub components on the specified Chevrolet model.
Braintree Scientific 9mm EZ Clip Sleeve, 200/Pack non-sterile
The EZ Clip™ Ideal for use with lab animals or in veterinary surgery. Racks of 9mm clips are individually packaged in heat sealed, peel-away sleeves for cleanliness, ease of handling and storage. EZ Clips™ are packaged 20 clips on a rack, with 5 racks per strip (100 clips total). They can be purchased by the strip, 2 strips (200 clips) or by the case (1000 clips). Clips are pyrogen free and non-sterile. However, the autoclavable plastic packaging allows for sterilization of the clips without removing them from the packaging. The EZ Clip Applier is a stainless steel applying forcep that holds one rack of 20 clips. Works like a staple gun to apply clips to wound. The clips are fed by rustless beryllium-copper springs. The EZ Clip Remover™ is also stainless steel and can be used to remove all sizes of wound clips. **Sold for research purposes only and not for human use**
Essendant FIRST AIDCOTTON TIP APP
Convenient refills contain individual items for restocking first aid kits For general use around office or home For SmartCompliance System Number of Pieces- 100 For Use With- SmartCompliance First Aid Cabinets Material(s)- Wood/Cotton
Med Vet International Carprofen Injection, 50mg/mL, 20mL
VET LICENSE NEEDS TO BE PROVIDED IN 3-4 BUSINESS DAYS OR ORDER WILL BE CANCELLED
Carprofen Sterile Injectable Solution is indicated for the relief of pain and inflammation associated with osteoarthritis and for the control of postoperative pain associated with soft tissue and orthopedic surgeries in dogs. Carprofen Sterile Injectable Solution provides 50mg/mL of carprofen.Shipping charges for refrigerated items are a flat charge based on your location or zone. Cold items are packed on ice and shipped separately in a cooler with expedited shipping. Med-Vet ships cold items Monday-Wednesday only. Next day air available for an additional charge.
Revvity Health Sciences Inc SRM-5 Small Rodent Manifold
SRM-5 small rodent manifold seamlessly delivers aneshesia to either 5 mice or 2 rats when used in conjunction with the Magnetic Quick Connect (sold separately). A robust new design requires no nose cones and offers superior scavenging for reduced anesthesia gas exposure. This system provides the ultimate in flexibility and ease of use as multiple accessories can be easily removed or changed with the quick connect functionality. For use with the IVIS Lumina S5 and IVIS Lumina X5 in vivo imaging systems.
World Precision Instrument Rodent Facemask Kit for Anesthesia-OC-SFM-KIT
These rodent gas masks fits mice and rats of all sizes, and they are versatile for a wide variety of applications. The OC gas masks allow you access to the eyes and head of the rodent while sealing the nose and mouth. The gas masks provides stability of the animal for examinations and surgery, and they can be easily incorporated in existing examination procedures. The waste-line connects to gravity or vacuum filters, and swiveling ports allow for greater flexibility in positions. The are easily adapted for stereotaxic applications.