Bottletop Filters
MilliporeSigma™ SteriCap PLUS
For ultrafast, aseptic sterilization of 2 to 10 L using vacuum filtration
Hach Company Sartorius Biosart 100 Monitor
Sartorius Biosart 100 Monitors, Case of 48 Sterile Monitors (Not individually packaged). By drawing vacuum across the membrane, your sample is quickly and efficiently filtered through the included 0.45 µm filter. After filtering, the monitor quickly converts into its own Petri dish, saving time and money, while eliminating waste. Simply cap the bottom of the monitor, remove the cylinder side tube, add media, and cap the Petri dish.
Waters Corp Air Filter, Bottom, UPLC System, Annual Replacement
This replacement air filter is designed for use on ACQUITY Sample Organizers.
- One unit per package.
- Air filter.
- For UPLC systems.
- Annual replacement schedule.
Bellco Glass, Inc. Air Stone Sparger,3L For MicroCarrier Spinner Flasks
Gently introduces bubbles into vessels. Includes 45mm polypropylene cap and white silicone gasket. MADE IN THE USA. 316l stainless steel 20 ra finish Size: 3l 12mm od coarse glass frit 0.2um Acrodisc filter w/ hose fitting
IW Tremont Co Inc Quartz microfiber, 4.7cm diameter, high purity (SiO2) microfiber filters , binderless, 1000°C+ temperature - 100/pk
LabExact Grade Quartz A glass microfiber filters are a fine porosity, binderless quartz (SiO₂) media with 99.999% air filtration efficiency for the retention of 2.2µm particles. This grade has an effective temperature range up to 1000°C and meets or exceeds the physical, performance, and elemental requirements for EPA PM10 ambient air monitoring methods. The material exhibits a flow rate of 1.1 to 1.35m³/min with a resistance of 95mm H₂O at 10.5ft/min, a loss on ignition of less than 6%, and tensile strength values of 215g per 15mm per ASTM D828 with a machine‑direction tensile strength of 7.3lbs/in per TAPPI T494. Grade Quartz A is primarily used in air pollution monitoring, atomic absorption spectroscopy, flame emission spectrometry, and other applications requiring critical analytical accuracy, and is ideal for use in acidic gases except hydrofluoric acid, aerosols, stack emissions, and flue gas monitoring.
Chemglass Life Sciences Chemglass Bottle Top Vacuum Filter System, 1,000 mL, 0.22 μm PVDF, Sterile (CGN-2009-015V)
Bottle-top sterile vacuum filter system for laboratory liquid clarification and sterilization. Uses a PVDF membrane with a 0.22 μm pore size and has a 1,000 mL capacity; designed for vacuum bottle-top filtration and includes molded graduations for volume monitoring.
- 1,000 mL capacity.
- PVDF membrane material.
- 0.22 μm pore size.
- Sterile, nest packaging.
- Designed for bottle-top vacuum filtration.
- Molded graduations for volume measurement.