Evaporator Accessories
Ace Glass, Inc. PTFE connecting adapter, 15mm Ace-Thred to 24-410 GPI vial, Chemraz O-ring
13290-134 PTFE connecting adapter, 15mm Ace-Thred to 24-410 GPI vial
Med Vet International Dynarex Securestrip Adhesive Wound Closures, Sterile, 1" X 4", 200/Case
Adhesive backed, non-woven wound closure strips provide support following early suture/staple removal. Flexible non-woven material Skin friendly adhesive to minimize skin shearing or blistering Provides secure closure Allows maximum porosity and vapor transmission for rapid healing
Cole-Parmer Sample Concentrator Needles, SS, 127 mm; 100/Pk
Techne Sample Concentrator Needles, SS, 127 mm; 100/Pk, Quickly concentrate multiple samples in a block at onceVariable needle position suits various Dri-Block insertsNeedles, block, and block heater sold separately, Concentrator blows an inert gas over the surface of your samples via stainless steel needles (not included). Blown gas in combination with the heat from the heater produce ideal conditions for fast efficient evaporation. Insert needles into a silicone membrane in any configuration. Fully adjustable gas reservoir provides accurate height control. Maximum vertical traveling distance is 32 cm. Maximum gas usage is 15 L/min.
Grainger Window Screen Pull Tabs Black Plas PK50
The PRIME-LINE Window Screen Pull Tabs are made of galvanized steel and are designed to replace worn out or missing pull tabs on window screens. They feature a 1-1/2" wide tab with pre-punched holes for easy installation. The tabs measure approximately 2-3/8" in overall length and protrude about 1-1/8" from the screen frame when installed. These durable steel pull tabs allow for easy opening and closing of window screens. The pack includes 24 tabs which should be sufficient for most window screen repair jobs.
Fritsch Milling And Sizing Inc P-16 Collecting Vessel 30 Litres with Filter Hose
As standard the PULVERISETTE 16 is delivered with a collecting vessel 5 litres. For grinding large quantities this collecting vessel with a capacity of 30 litres and filter hose is recommended.
Hach Company Hach 5500sc Ammonia Monochloramine Standard 1 (0 ppm NH3), 2 L
The 5500sc Ammonia Monochloramine Standard 1 is a factory-prepared, zero-concentration calibration standard supplied in a 2 L bottle for verification and calibration of ammonia/monochloramine analyzers.
- provides a 0 ppm NH3 reference for calibration and verification.
- supplied in a ready-to-use 2 L liquid bottle.
- reduces analyzer drift and supports measurement accuracy over time.
- suitable for use with compatible ammonia-monochloramine online analyzers.
- store tightly closed in a dry, well-ventilated place.
Electron Microscopy Sciences Vacuum Vacuum Mounting Blocks, 2.186"
Vacuum Mounting Bocks are for use with the Models 155DV, 155D, and 155V lapping and polishing fixture. Made of stainless steel. Blank for Vacuum Pattern.
Diameter: 2.186" (55.5mm)
Use: 155D, 155V, 155DV
Research Products International Corp Large Capacity Sample Blocks, 100 x 0.5ml Tubes
Ideal dry bath incubator can freeze, chill or heat a variety of tube sizes including 0.2, 0.5, 2.0, 15 and 50ml. Aluminum blocks are also available for assay plates, test tubes and round bottom flasks. Compact and portable design requires minimal bench space.
Blocks are not included with unit. Order separately.
Across International Stainless Steel Flask Carrier for Ai 20L Evaporating Flasks
Stainless steel 20L evaporating flask carrier with silicone cushions, custom made for Ai 20L SolventVap series rotary evaporators. This carrier can be placed on top of our 20L SolventVap's water bath for safe and easy flask loading and unloading; it can also serve as a flask table stand.