Freeze Drying Chambers and Equipment
TA Instruments Ver 1 HA Aluminum Double Gap Concentric Cylinder Cup, Inner Radius 20 mm, Outer Radius 22.38 mm, Use with Upper Double Wall Rotor, Sample Volume 6.48 mL, Cup Insert Stainless Steel, for HR X0, DHR and AR-Series Peltier Jacket
Waters TA Instruments Ver 1 HA Aluminum Double Gap Concentric Cylinder Cup is for use with HR X0, DHR, and AR-Series Peltier Jacket. It is designed to be used with the upper double wall rotor. Cup inner radius is 20.00 mm, outer radius is 22.38 mm. Sample volume with the double wall rotor is 6.48 mL. The cup insert is stainless steel.
Chemglass Life Sciences Drying Chamber, #50 O-Ring Joint, Lower Vessel 50mm ID X 100mm Height, Airfree, Schlenk, #75 Clamp Size, #229 O-Ring Size
Chamber for use in drying small quantities of material in dram vials. Can also be used in the transfer of materials from glovebox to glovebox or to the vacuum line. Lower vessel has a flat bottom permitting it to be stood upright on the bench or in a glovebox. Top adapter has a 0-4mm Chem-Vac Chem-Cap valve. Complete item is supplied with the corresponding CG-150 S.S. pinch clamp and one Viton o-ring.
Hach Company UV Lamp Kit, 230V, 50HZ
Ultraviolet Lamp Kit, 230V. Includes UV Goggles (2113400) and UV Lamp/Power supply.
Norell Inc 5mm, 500MHz 7" VALVED THIN WALL NMR TUBE FOR INTERMEDIATE PRESSURE 1 Tube per pack
These pressure tubes facilitate experiments requiring conditions such as pressurized inert atmosphere blanketing, addition of reactive gaseous reagents under pressure, containment of low boiling point solvents or samples at elevated temperatures, and so on.We recommend that the maximum operating pressure should be limited to 600 kPa (6 bar, 87 psi) when using a thin wall pressure tube, up to 1200 kPa (12 bar, 175 psi) if using a heavy wall pressure tube. (Please see accompanying table for complete details).
Ace Glass, Inc. Flask, 6L, evaporation, 295mm height, large flange
Flask, 6L, evaporation, 295mm height, large flange
Chemglass Life Sciences Drying Tower, 250mm Overall Height
Cylindrical shaped drying tower has a 34/28 ground glass stopper. The stopper has a hole coinciding with a serrated hose connection sealed in the outer portion of the stopper neck and a second hose connection near the base of the cylinder. A hex base is sealed to the bottom of the tower for added stability.
Air Science Usa SAFESWAB Swab Drying Cabinet, Swab Dryer, 115V 60Hz
SafeSwab Swab Drying Cabinet, Benchtop with HEPA main filter formulated to contain any particulates or biological material that might be present on swabs, Safeswab is used to safely dry evidence swabs while protecting them from cross-contamination. Includes two 15 capacity swab drying racks. (FDC-001)
Norell Inc 5mm, 500MHz 7" VALVED MEDIUM WALL NMR TUBE FOR INTERMEDIATE PRESSURE 1 Tube per pack
These pressure tubes facilitate experiments requiring conditions such as pressurized inert atmosphere blanketing, addition of reactive gaseous reagents under pressure, containment of low boiling point solvents or samples at elevated temperatures, and so on.We recommend that the maximum operating pressure should be limited to 600 kPa (6 bar, 87 psi) when using a thin wall pressure tube, up to 1200 kPa (12 bar, 175 psi) if using a heavy wall pressure tube. (Please see accompanying table for complete details).
Ace Glass, Inc. Flask, storage, 6L, bottom hose connection, #11 stopper size beaded neck, cs/2
6L media storage flask with 1/2" bottom hose connection. Ideal for use with aseptic filling bells for transferring medias to various other flasks and vessels. Beaded rim neck takes standard cotton plugs or stoppers.