Stirrer Accessories
Chemglass Life Sciences Digital Controller Only, for Brushless DC Motor, Closed Loop Controls, TFT Display, Wifi, 115V-230V
Digital Controller Only, for Brushless DC Motor, Closed Loop Controls, TFT Display, Wifi, 115V-230V. Velp/Chemglass Wi-Fi Enabled Laboratory overhead stirrer motor and separate controller. Controller features a TFT 3.5” Display that shows all setting information at a glance. Wi-Fi Connection to Velp Ermes Platform allows the end user monitor status and data logging on the cloud. USB interface for use with optional PC software to data log, monitor, turn off/on. USB also allow Software Updates. Stirrerfeatures torque compensation so the stirrer maintains a constant speed under varying viscosities. Display shows set and actual speed, torque trend and timer. Features: Timer For Unattended Operations, Compatible with CG-2033-B 1/4 HP Brushless Motor, Key Lock Function to Avoid Unintended Changes with Settings, Programmable methods to setup to 4 Time/Speed Ramps, PT100 Probe Connection for Temperature Monitoring: Measurement Range -200 to +550° C
Chemglass Life Sciences Agitator, PTFE, 10mm, Four Blade, 50mm Dia, Fits Shaft Size 10mm, 90° Impeller Angle
Agitator, PTFE, 10mm, Four Blade, 50mm Dia, Fits Shaft Size 10mm, 90¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Available in 45¿, 60¿ and 90¿ impeller angles. The 45¿ and 60¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the stirrer shaft and locks onto shaft with a glass filled TFE screw.
Chemglass Life Sciences Stirrer Blade, PTFE, Banana Shape, Solid, 10mm, for 5000mL Flasks, 45/50 minimum joint clearance
Stirrer Blade, PTFE, Banana Shape, Solid, 10mm, for 5000mL Flasks, 45/50 minimum joint clearance. Blade is shaped to resemble the contour of a round bottom flask. Blades are solid. Made of 1/8" PTFE to fit 10mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.
Chemglass Life Sciences Agitator, PTFE, Four Blade, 6in Diameter, Fits 25.4mm Shaft Size, 45° Impeller Angle
Agitator, PTFE, Four Blade, 6in Diameter, Fits 25.4mm Shaft Size, 45¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 25.4mm OD stirrer shaft CG-2097 and have 45¿ impeller angles. The 45¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the shaft. Locks onto shaft with a collet hub and nut and has a glass filled PTFE safety screw. PLEASE NOTE: ANGLED IMPELLARS DESIGNED TO STIR UPWARDS IN A CLOCKWISE DIRECTION ARE AVAILABLE. PLEASE CALL FOR PRICING.
Chemglass Life Sciences 13" One-Piece PTFE Lower Agitator, Four Blade, For Use with 30mm Shafts, For use with 400mm ID Flange Reactor
13" One-Piece PTFE Lower Agitator, Four Blade, For Use with 30mm Shafts, For use with 400mm ID Flange Reactor. High viscosity agitator. The body is made entirely from ONE PIECE of CLASS VI VIRGIN PTFE. One-piece machined body is much easier to clean. The smooth machined surface has no seams, joints or crevices for material to collect. The design provides excellent stirring at the bottom of CG-1968-W 400mm ID 100L reactor vessels, especially when heavy slurries are being mixed. Agitator attaches to stir shaft by both a compression fitting and a PTFE safety pin. Heavy duty blades 9mm thick. For use with 30mm CG-2097 stirrer shafts. PLEASE NOTE: THE LOWER AGITATOR HAS BUSHING TO ACCEPT A STABILIZING PIN FROM DRAIN VALVE PLUG. THE PIN EXTENDS INTO THE LOWER AGITATOR AND VIRTUALLY ELIMINATES ANY WHIPPING BY STABILIZING THE STIRRER SHAFT.
Chemglass Life Sciences Stirrer Blade, PTFE, Banana Shape, Perforated, 10mm, for 2000mL Flasks, 45/50 minimum joint clearance
Stirrer Blade, PTFE, Banana Shape, Perforated, 10mm, for 2000mL Flasks, 45/50 minimum joint clearance. Blade is shaped to resemble the contour of a round bottom flask. Blades are perforated. Made of 1/8" PTFE to fit 10mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.
Bellco Glass, Inc. Round Bottom Marine Impeller,8L
MADE IN THE USA. Dimensions: 1/2" od x 12 1/2" longStainless steel 4" od right hand pitch marine prop & e-clipMaterial: 316l stainless steel with electropolish finishFor round bottom omni vessel (1964-88405)Need l/f head plate, over head drive motorSize: 8l
Chemglass Life Sciences Agitator, PTFE, Four Blade, 9in Diameter, Fits 25.4mm Shaft Size, 45° Impeller Angle
Agitator, PTFE, Four Blade, 9in Diameter, Fits 25.4mm Shaft Size, 45¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 25.4mm OD stirrer shaft CG-2097 and have 45¿ impeller angles. The 45¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the shaft. Locks onto shaft with a collet hub and nut and has a glass filled PTFE safety screw. PLEASE NOTE: ANGLED IMPELLARS DESIGNED TO STIR UPWARDS IN A CLOCKWISE DIRECTION ARE AVAILABLE. PLEASE CALL FOR PRICING.
Bellco Glass, Inc. Over Head Drive PTFE Impeller Assembly ,15L
Ideal use for over head drive vessels. 15L OHD Impeller Assembly Consists of Paddle, Plug, Paddle Holder, andDrive Shaft. MADE IN THE USAPaddle [A523-214]: PTFE material, 171.5mm wide x 76.2mm tall x 1.6mm thickPlug [A542-49]: PTFE, 9.5mm OD x 19.1mm long (approx.)Paddle Holder [A542-50]: White PTFE, 279.4mm long x 19.1mm ODDrive Shaft [A542-47]: 316L SST, 215.9mm long x 6.4mm OD (approx.)
Cole-Parmer IKA 1296000 Propeller Stirrer, 3-Bladed, 13.75" (350 mm) Shaft
A variety of propellers, paddles, clamps, and stands are available.
Arrow Engineering Type 316 Stainless Steel Propeller 2-1/2"dia. 4 Blade
The Arrow Mixing Products Type 316 Stainless Steel 2-1/2″ 4 blade propeller with 5/16-24 tapped hole. Our stainless propeller selection is engineered for optimal performance, ensuring smooth and consistent mixing for various industries, including pharmaceuticals, food processing, and chemical production. With a carefully crafted design, these propellers maximize power and efficiency, helping you achieve the best results for your mixing needs.
Chemglass Life Sciences Stirrer Blade, PTFE, Banana Shape, Perforated, 19mm, Heavy Duty, for 5000mL Flasks, 45/50 minimum joint clearance
Stirrer Blade, PTFE, Banana Shape, Perforated, 19mm, Heavy Duty, for 5000mL Flasks, 45/50 minimum joint clearance. Blade is shaped to resemble the contour of a round bottom flask. Blades are perforated. Made of 3/16" PTFE to fit 19mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.