Microscope Lamps and Accessories
Ted Pella Inc Formvar/Carbon 200 mesh, Nickel, approx. grid hole size: 97µm, 50/pk
A Formvar film covered with a "light" layer of carbon. The heat and electrical conducting properties of carbon help to stabilize the Formvar films when exposed to the electron beam. This is a resilient, all-purpose specimen support film, ideal for mounting thin sections and for applications using lower ranges of magnification.
Electron Microscopy Sciences EMS Platinum Aperture with 40 µm hole, 0.24 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 40 µm
O.D.: 3 mm
Thickness: 0.24 mm
Electron Microscopy Sciences EMS Platinum Aperture with 200 µm hole, 0.24 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 200 µm
O.D.: 3 mm
Thickness: 0.24 mm
Electron Microscopy Sciences EMS Gold Aperture with 300 µm hole, 3 mm O.D., 0.24 mm thick
Advanced techniques of thin metal film application permits the apertures to retain a clean hole edge during prolonged beam exposure. Ultra-thin, half-micron design discourages contaminant accumulation and stabilizes astigmatic conditions to provide longer life. Conventional mechanical cleaning involving costly down-time is no longer necessary. Because the foil is ultra thin, care must be taken when handling the gold foil apertures.
Size: 300 µm
O.D.: 3 mm
Thickness: 0.24 mm
Electron Microscopy Sciences EMS Platinum Aperture with 60 µm hole, 0.24 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 60 µm
O.D.: 3 mm
Thickness: 0.24 mm
Electron Microscopy Sciences EMS Gold Aperture with 60 µm hole, 3 mm O.D., 0.24 mm thick
Advanced techniques of thin metal film application permits the apertures to retain a clean hole edge during prolonged beam exposure. Ultra-thin, half-micron design discourages contaminant accumulation and stabilizes astigmatic conditions to provide longer life. Conventional mechanical cleaning involving costly down-time is no longer necessary. Because the foil is ultra thin, care must be taken when handling the gold foil apertures.
Size: 60 µm
O.D.: 3 mm
Thickness: 0.24 mm
Rarecyte RareCyte RarePlex Developer Kit: 405 nm, Ventana
This Developer Kit (Version: 405-A-V) enables detection of an additional custom biomarker in the 405 nm channel on a CyteFinder instrument. Samples are stained by a Ventana DISCOVERY ULTRA automated staining system and are imaged on a CyteFinder Instrument. This kit must be paired with a RarePlex base kit (0900-VB) to run on automated stainer. The kit contains reagents needed for detection of a single channel (405 nm) biomarker stained with a customer‑provided rabbit or mouse antibody, instructions and protocols for staining and scanning and guidelines for interpreting results.
Morrell Instrument Company Inc MORRELL INSTRUMENT COMPANY INC
NC4012633 CFI PLAN ACHROMAT 4X 0.10 30
Electron Microscopy Sciences EMS Platinum Aperture with Spray 500 µm, 12.7 mm O.D.
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: Spray 500 µm
O.D.: 12.7 mm
Electron Microscopy Sciences Tripod Polisher Heater Block
Designed to hold any of the Lbrackets while being heated on a hot plate prior to mounting sample melted wax. Provides a slow, uniform temperature gradient, which minimizes thermal shock. - For use with Tripod Polisher.