Microscope Lamps and Accessories
Morrell Instrument Company Inc CFI PLAN ACHROMAT 100X / 1.25
Morrell is only authorized to sell the following products in New York, New Jersey, Pennsylvania, Maryland, Washington DC, Delaware, Virginia, West Virginia, Ohio, Indiana, and Kentucky.
Ace Glass, Inc. Solvent return tubing, 1/4in OD x 12 inch, use in lighter than water extraction apparatus configuration
O.D. x 12 solvent return tubing for use in lighter than water extraction apparatus configurations.
Electron Microscopy Sciences SEM Large Single Pin Mount Storage Tube
A plastic tube and plug ideal for storage or mailing of SEM mounts. The pin, 1/8" (3.1mm) in diameter, is inserted securely to the plug and protected by the tube. Mounts can be up to 38mm diameter. Ideal for storage or mailing. The outer measurements of the tube are 1.57" (40mm) x 2.95" (75mm). Max height of sample on stub is 1.18" (30mm).
I.D.: 39 mm
Size: 40 mm x 75 mm
Sample height: 30 mm
Electron Microscopy Sciences High Magnification SEM Specimen Tin On Carbon on Grid, JEOL Stub
This high magnification test is supported by a grid with tin dispersion over a carbon substrate. Range is about 3 - 60nm. The tin spheres are easily found on the grid. The grid allows the test to be level with the tin spheres.
Type: JEOL Stub
Ted Pella Inc FORMVAR 400 MESH COPPER 01702F
Formvar, 400 mesh, copper, pkg/50 Substrates, Support Films for Transmission Electron Microscopy Grids Formvar: A film of pure Formvar, with no stabilizing coating. These films are useful for your customized coating of stabilizing material or for the support of thin sections.
Medicus Health Tube Agglutination Viewer, 3"L x 1"W x 0.375"H
Review microagglutination easily with this tube holder ∙Provides a consistent tube height so you don't have to re-adjust the microscope focus ∙Allows you to spin the tube in place to view all areas of the reaction ∙Provides unobstructed views of the cells ∙Holds any size tube in the U-channel ∙3"L x 1"W x 0.375"H
Dino Lite MS33A Adjustable Articulating Arm - Designed for Dino-Lite
MS33A is a fully adjustable articulating arm designed for Dino-Lite microscope cameras. The articulating arm can be handled and adjusted simply with one hand. Tighten the single knob locking mechanism to hold the Dino-Lite in the desired position. When extended flat, the arm has a 9" reach.
Electron Microscopy Sciences AMD-MA Microscope Workstation, 120 x 75 cm, Stainless Steel Surface
These isolation tables support most of the larger microscopes and their support equipment. The air isolation platform effectively removes most removes most vibrations. The rigid frame has levelling feet which ensure the table is in excellent contact with the floor. The damped rolling diaphragm isolators have a low natural frequency of 2Hz which effectively isolates out vibrations above 6Hz, well below the frequencies at which typical building vibrations begin to occur. Features an active 35x55cm isolation area and full width table guards.
Size: 120 x 75 cm
Surface: Stainless Steel
Type: Active Air Self Leveling
Electron Microscopy Sciences Cambridge Universal SEM Stub Interchangeable Carousel
Universal adapter to fit Cambridge SEMs which then accepts interchangeable multi carousel, single pin stubs, or re-entrant stubs. Holds 8 pin stubs.
Electron Microscopy Sciences AMD-SM Microscope Workstation, 75 x 75 cm, Stainless Steel Surface
Microscope workstations featuring a unique Sorbothane isolator design removing up to 98 percent of unwanted vibrations.
Size: 75 x 75 cm
Surface: Stainless Steel
Electron Microscopy Sciences AMD-MP Microscope Workstation, 120 x 75 cm, Surface
These isolation tables support most of the larger microscopes and their support equipment. The air isolation platform effectively removes most removes most vibrations. The rigid frame has levelling feet which ensure the table is in excellent contact with the floor. The damped rolling diaphragm isolators have a low natural frequency of 2Hz which effectively isolates out vibrations above 6Hz, well below the frequencies at which typical building vibrations begin to occur. Simply pumped up via cycle valves. Full width table guards.
Size: 120 x 75 cm
Type: Active Air Self Leveling
Electron Microscopy Sciences AMD-SM Microscope Workstation, 90 x 75 cm, Stainless Steel Surface
Microscope workstations featuring a unique Sorbothane isolator design removing up to 98 percent of unwanted vibrations.
Size: 90 x 75 cm
Surface: Stainless Steel
Electron Microscopy Sciences Anti-Vibration Platform Table Drawer
Modular accessories for AMF and AMP vibration isolation platforms.
Electron Microscopy Sciences AMD-MA Microscope Workstation, 90 x 75 cm, Stainless Steel Surface
These isolation tables support most of the larger microscopes and their support equipment. The air isolation platform effectively removes most removes most vibrations. The rigid frame has levelling feet which ensure the table is in excellent contact with the floor. The damped rolling diaphragm isolators have a low natural frequency of 2Hz which effectively isolates out vibrations above 6Hz, well below the frequencies at which typical building vibrations begin to occur. Features an active 35x55cm isolation area and full width table guards.
Size: 90 x 75 cm
Surface: Stainless Steel
Type: Active Air Self Leveling