Microscope Accessories and Replacement Parts
General accessories and parts for use with microscopes. Products include lens oil, lens cleaner, slide dispensers, microscope covers, vessel holders, light cubes, and flow cells.
Many parts of your microscope can be updated or replaced including microscope lamps, lenses, and eyepieces. Replacement lamps, light sources, and power cords can extend the working lives of your microscopy equipment. New or replacement objectives and lenses can help increase the total magnification available with your microscope.
Add greater magnification or exchange your eyepiece for one with a reticule to more easily estimate the sizes of the items being viewed.
Replace or update your mechanical stage or clamps or add cell culture vessel adapters to facilitate specimen positioning.
Condensers can also be replaced, and conversion kits are available to add phase contrast, polarization, fluorescence, or other capabilities to your current system.
Some microscopes can be adapted for use with still or video cameras. Look for cameras and adapters designed for your specific microscope brand. Film and documentation-related products may also be available to support your record-keeping.
Temporary, semi-permanent, and more long-term slide storage options include:
- Slide racks that securely hold slides during staining procedures
- Folding fiberboard or plastic slide holders with horizontal indentations that keep microscope slides in place
- Slide storage boxes with vertical dividers; made from fiberboard, plastic, and wood and available in multiple sizes
- Slide holders and mailers for transporting slides safely
- Slide storage systems and cabinets for large quantities of slides or archival storage
Electron Microscopy Sciences EMS Platinum Aperture with 20 µm hole, 0.165 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 20 µm
O.D.: 4 mm
Thickness: 0.165 mm
Electron Microscopy Sciences EMS Platinum Aperture with 70 µm hole, 0.24 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 70 µm
O.D.: 3 mm
Thickness: 0.24 mm
Electron Microscopy Sciences EMS Gold Aperture with 30 µm hole, 3 mm O.D., 0.12 mm thick
Advanced techniques of thin metal film application permits the apertures to retain a clean hole edge during prolonged beam exposure. Ultra-thin, half-micron design discourages contaminant accumulation and stabilizes astigmatic conditions to provide longer life. Conventional mechanical cleaning involving costly down-time is no longer necessary. Because the foil is ultra thin, care must be taken when handling the gold foil apertures.
Size: 30 µm
O.D.: 3 mm
Thickness: 0.12 mm
Electron Microscopy Sciences EMS Platinum Aperture with 15 µm hole, 0.53 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 15 µm
O.D.: 2 mm
Thickness: 0.53 mm
Electron Microscopy Sciences EMS Strip Aperture Hitachi, 10-10-20-70 µm holes, 41.0 x 4.0 x 0.10 mm
Strip apertures made from Platinum-Iridium (95:5).
Holes: 10-10-20-70 µm
Dimensions: 41.0 x 4.0 x 0.10 mm
Electron Microscopy Sciences EMS Gold Aperture with 100 µm hole, 2 mm O.D., 0.53 mm thick
Advanced techniques of thin metal film application permits the apertures to retain a clean hole edge during prolonged beam exposure. Ultra-thin, half-micron design discourages contaminant accumulation and stabilizes astigmatic conditions to provide longer life. Conventional mechanical cleaning involving costly down-time is no longer necessary. Because the foil is ultra thin, care must be taken when handling the gold foil apertures.
Size: 100 µm
O.D.: 2 mm
Thickness: 0.53 mm
Electron Microscopy Sciences Veco Thin and Thick Bars 100+ym, Copper Grid
Veco Grids offer superior handling characteristics. Plus, with a 0.8 mil thickness, Veco Grids are the most rigid grids available. 3.05 mm diameter.
Material: Copper
Hole: 100 µm
Electron Microscopy Sciences EMS 1/32" dia Aperture Flamer
For holding aperture discs or strips while flaming. Small discs can be flamed in the 3/16" diameter cup made from 6 mil platinum foil with a 1/32" diameter hole in the bottom to induce a good flow of air. The cup is attached by a 30 mil platinum wire to a heat resistant handle. The aperture can be hung from the hook for flaming.
For holding 1/4" to 1/2" diameter aperture discs while flaming. The flat pan is made from 6 mil platinum foil with a 1/32" diameter hole in the bottom to induce adequate air flow. A 30 mil platinum wire attaches the pan to a heat resistant handle.
Electron Microscopy Sciences Formvar Solution (Choose Percentage) 25 ML
Formvar Solution in Ethylene Dichloride is microfiltered and ready to use.
Electron Microscopy Sciences Immersion Cedar Wood Oil 100 ML
Refractive Index 20 degree C 1.515-1.520. Used as an immersion oil.
Electron Microscopy Sciences EMS Strip Aperture Hitachi, 10-50-100-200 µm holes, 41.0 x 4.0 x 0.10 mm
Strip apertures made from Platinum-Iridium (95:5).
Holes: 10-50-100-200 µm
Dimensions: 41.0 x 4.0 x 0.10 mm
Electron Microscopy Sciences EMS Platinum Aperture with 150 µm hole, 0.24 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 150 µm
O.D.: 3 mm
Thickness: 0.24 mm
Electron Microscopy Sciences MicroSaw Circular Diamond Saw Model MS 3
A circular diamond saw for precision cutting under stereo microscope, to be mounted under a standard laboratory microscope. Ideal for cutting and sectioning required during the TEM specimen preparation. The compact design and easy operation, MicroSaw allows the user cut almost any solid material with precisely and reproducibly prior to thinning for TEM. Thin ceramic, semiconductor material, hard metals can be further sectioned with 0.01 mm.
The Model MS 3 MicroSaw is driven by an electric motor through a helical transmission. The 12 V DC is provided by the power supply subunit. The speed at which the wheel turns is continuously adjustable. Adjustment of the specimen position, arm contact point, arm tension, and the down-stop control mechanism is possible. Two adjustment screws at the bottom of the instrument allow positioning of the stand, and leveling the MicroSaw underneath of the stereomicroscopy for precision sectioning.
World Precision Instrument Large Knob Cover Silicone
Silicone handle covers for use with the SurgiScope Surgical Microscope. The silicone handle covers protect the handles and knobs of your microscope during surgery and can be easily removed for cleaning.