Microscope Accessories and Replacement Parts
General accessories and parts for use with microscopes. Products include lens oil, lens cleaner, slide dispensers, microscope covers, vessel holders, light cubes, and flow cells.
Many parts of your microscope can be updated or replaced including microscope lamps, lenses, and eyepieces. Replacement lamps, light sources, and power cords can extend the working lives of your microscopy equipment. New or replacement objectives and lenses can help increase the total magnification available with your microscope.
Add greater magnification or exchange your eyepiece for one with a reticule to more easily estimate the sizes of the items being viewed.
Replace or update your mechanical stage or clamps or add cell culture vessel adapters to facilitate specimen positioning.
Condensers can also be replaced, and conversion kits are available to add phase contrast, polarization, fluorescence, or other capabilities to your current system.
Some microscopes can be adapted for use with still or video cameras. Look for cameras and adapters designed for your specific microscope brand. Film and documentation-related products may also be available to support your record-keeping.
Temporary, semi-permanent, and more long-term slide storage options include:
- Slide racks that securely hold slides during staining procedures
- Folding fiberboard or plastic slide holders with horizontal indentations that keep microscope slides in place
- Slide storage boxes with vertical dividers; made from fiberboard, plastic, and wood and available in multiple sizes
- Slide holders and mailers for transporting slides safely
- Slide storage systems and cabinets for large quantities of slides or archival storage
Electron Microscopy Sciences Thompson Graticle G23, 16mm
For counting particles in any of three areas of known size. The graticule is calibrated in the same manner as a normal eyepiece scale. The result is then used to calculate the area of any square.
Size: 16mm
Divisions: 10 mm, 7 mm and 4 mm squares
Electron Microscopy Sciences Formvar Solution (Choose Percentage) 25 ML
Formvar Solution in Ethylene Dichloride is microfiltered and ready to use.
Electron Microscopy Sciences Amray 1400 Pin Stub Slotted 1" head, Carbon, 1/8" Pin diameter
For use with Amray 1400 scanning electron microscopes. Made from spectroscopically pure carbon.
Head: 1/2"
Electron Microscopy Sciences JEOL JSM 840 SEM Cylinder Mount 1/2" surface, 1/4" height, Aluminum
Cylinder specimen mounts are for use with JEOL JSM-840 scanning electron microscopes. The mounts are made from ultra-pure aluminum with standard lathe finish.
Head: 1/2"
Height: 1/4"
Electron Microscopy Sciences AMP Passive Air Isolation Platform with Stainless Steel Surface 90 x 120 cm
These High Performance anti-vibration platforms for microscopes are designed to be pumped-up and left alone. Simple to use, they are ideal for use with fixed loads or in applications where pressurised air or gas cannot be used. The unique air damped rolling diaphragm sub 2Hz frequency isolator removes up to 99 percent of vibrations. And sound deadening construction eliminates unwanted surface vibrations. They support loads up to 100kg .
Size: 90 x 120 cm
Surface: Stainless Steel
Electron Microscopy Sciences ProScope Case
Case is made of durable hard plastic shell and a soft inner mold with slots for the ProScope, all the lenses and the ProScope stand. Perfect for safely and securely taking your ProScope and lenses into field.
World Precision Instrument PZMIV 20X Wide Field Eyepiece for PZMIV (pair)
- For use with the PZMIV
- One pair of microscope eyepieces
- 20x Magnification
Electron Microscopy Sciences MicroMounts™ Crystal Tool with Assortment A1, 11 mm pin
MicroMounts are the high performance tools for manipulating and mounting protein crystals, virus crystals, and small molecule/inorganic crystals, and other small, fragile samples. They are ideal for both conventional and high-throughput X-ray crystallography applications.
Each consist of a thin (7.5um thick) micro-fabricated polyimide film, attached to a solid non-magnetic stainless steel pin. Film is wrapped around the steel pin and it provides excellent stiffness and convenient scoop-like action in retrieving and handling crystals. Includes: 10, 20, 30 and 40 um apertures.
Aperture: 11 mm pin
Electron Microscopy Sciences PremaDisk S-SiC Grinding Disc P220, 300 mm diameter, 220µm Particles
Grinding disks made with silicon carbide grains with a 60 percent SiC concentration that is hard resin bonded. The disc can be used in wet or dry applications and have a consistent stock removal rate. They are designed with a flat grain curve that will not flatten after a few applications. They are a good alternative to SiC abrasive paper and SiC grinding foils (films), lasting 50-100 times longer.
Grinding disks come with self-adhesive backing. The discs have a thickness of 0.4 mm.
Diameter: 300 mm
Particles: 220µm
Electron Microscopy Sciences EMS 1/32" dia Aperture Flamer
For holding aperture discs or strips while flaming. Small discs can be flamed in the 3/16" diameter cup made from 6 mil platinum foil with a 1/32" diameter hole in the bottom to induce a good flow of air. The cup is attached by a 30 mil platinum wire to a heat resistant handle. The aperture can be hung from the hook for flaming.
For holding 1/4" to 1/2" diameter aperture discs while flaming. The flat pan is made from 6 mil platinum foil with a 1/32" diameter hole in the bottom to induce adequate air flow. A 30 mil platinum wire attaches the pan to a heat resistant handle.
Electron Microscopy Sciences Microwave Transparent Jars
These microwave-transparent jars with wide mouths and vented lids are ideal for use in light or electron microscopy microwave laboratory procedures. Includes two 500ml and one 1000ml jar.
Electron Microscopy Sciences Crossed Scale Microscope Graticle NE17, 16 mm, 10 mm with 0.1 mm subdivisions
Used as a horizontal and a vertical scale, they are especially useful when interested in measurement in different axis. Crossed micrometer scale.
Size: 16 mm
Divisions: 10 mm with 0.1 mm subdivisions
Surface: Chrome image
Electron Microscopy Sciences Paterson Globes and Circles Graticle NG1, 16mm
The graticule consists of a central rectangle, sub-divided into nine smaller rectangles with a number of increasing circles outside the top and bottom horizontal edges. The marked figures are the diameters of the circles in units. 250 units represent the horizontal length of the large rectangle. Rectangle size is 4.5mm x 2.025mm. Circle sizes in microns are 450, 360, 270, 225,180,145, 110, 74, 37, and 18.
Size: 16 mm
Surface: Glass sandwich
Electron Microscopy Sciences PS8 Micrometer Standard with NPL Cert
These stage micrometers are available with a calibration certificate that provides traceability for the precise calibration and confirmation of accuracy of optical measuring instruments, necessary under ISO provisions. The glass discs are mounted in stainless steel slides with engraved serial numbers. Each slide is supplied in a polished wooden storage case. Calibrated by the National Physical Laboratory by taking measurements at selected points on the scale.
Electron Microscopy Sciences PremaDisk Diamond Grinding Disc SH Hard Bond, 60 µm Particles, 250 mm diameter
PremaDisk Flexible Diamond Grinding Discs offer superior surface finishes that are usually only seen in lapping processes.
The SM disc is a medium-hard resin bond base for fine grinding and polishing of metals, ceramics and glass.
The SH disc is a hard resin bond base for applications where a very sharp edge must be maintained on the workpiece.
Both discs increase productivity by combining optimum surface quality, removal rates, and tool life in the same process.
Particles: 60 µm
Diameter: 250 mm