Microscope Accessories and Replacement Parts
General accessories and parts for use with microscopes. Products include lens oil, lens cleaner, slide dispensers, microscope covers, vessel holders, light cubes, and flow cells.
Many parts of your microscope can be updated or replaced including microscope lamps, lenses, and eyepieces. Replacement lamps, light sources, and power cords can extend the working lives of your microscopy equipment. New or replacement objectives and lenses can help increase the total magnification available with your microscope.
Add greater magnification or exchange your eyepiece for one with a reticule to more easily estimate the sizes of the items being viewed.
Replace or update your mechanical stage or clamps or add cell culture vessel adapters to facilitate specimen positioning.
Condensers can also be replaced, and conversion kits are available to add phase contrast, polarization, fluorescence, or other capabilities to your current system.
Some microscopes can be adapted for use with still or video cameras. Look for cameras and adapters designed for your specific microscope brand. Film and documentation-related products may also be available to support your record-keeping.
Temporary, semi-permanent, and more long-term slide storage options include:
- Slide racks that securely hold slides during staining procedures
- Folding fiberboard or plastic slide holders with horizontal indentations that keep microscope slides in place
- Slide storage boxes with vertical dividers; made from fiberboard, plastic, and wood and available in multiple sizes
- Slide holders and mailers for transporting slides safely
- Slide storage systems and cabinets for large quantities of slides or archival storage
Electron Microscopy Sciences Brightfield Stage Micrometer S18
The S18 Brightfield Stage Micrometer features graduated metric and English scales for the calibration of measurement instruments across a wide range of magnifications. This flexible graduated scale stage micrometer is suitable for low magnification, stereo inspection microscopes to higher magnification compound microscopes. It features dual scales of 25 mm or 1 inch and graduated divisons, fine for low magnification, mid for medium magnification, and large for high magnification. It has high definition, chrome on glass image. The scales are centered on all glass slide 76 mm x 25 mm x 1.5 mm thick.
Electron Microscopy Sciences Cross Lines Graticle NE8, 24.5 mm, Nominal line width 0.020 mm
Used as NE50 but for measurements in two directions and for sighting and alignment. Image covers the entire field of view.
Size: 24.5 mm
Divisions: Nominal line width 0.020 mm
Surface: Chrome image
Electron Microscopy Sciences S7 England Finder Slide
S7 is a glass slide 75 mm x 26 mm marked over the top surface in a way that a referenced position can be directly read relative to the locating edges. It is marked with a square grid at 1 mm intervals. Each square contains a center ring bearing reference letters and numbers, the remainder of the square is subdivided into four segments numbered 1 to 4.
Reference numbers run horizontally 1 to 75 and letters vertically A to Z (omitting I). The main locating edge is the bottom of the slide, which is used in conjunction with either the left or right vertical edge of the slide.
Using the finder the position of a field of interest is easily recorded, ite can be relocated by another person when using a England Finder on another microscope. The location of the arrows is identical for all England Finder slides. Mark a label on the left hand side of the specimen slide, indicating the orientation. A total of 100 positions can be accurately located.
Electron Microscopy Sciences Grid Reticle RET 73, 19 mm, 10 mm x 10 mm Scale, 1 mm squares Divisions
High quality, precision made standard reticles are manufactured to use with our microscope eyepieces. All recticles are chrome on glass and positive polarity.
Size: 19 mm
Scale: 10 mm x 10 mm
Divisions: 1 mm squares
Line width: 25 µm
Electron Microscopy Sciences Grain Sizing Reticle NG60, 23 mm
For the determination of non-metallic inclusion content of steel. NG60 meets EN 10247 and NG61 Meets ISO 4976. Both are scaled for use eith 10x objective magnification Pattern
Size: 23 mm
Method: EN 10247
Electron Microscopy Sciences Grain Sizing Reticle NG61, 24.5 mm
For the determination of non-metallic inclusion content of steel. NG60 meets EN 10247 and NG61 Meets ISO 4976. Both are scaled for use eith 10x objective magnification Pattern
Size: 24.5 mm
Method: ISO 4967
Electron Microscopy Sciences Indexed Grid Graticle NE71, 24 mm, 20 x 20 Grid of 0.5 mm squares
Useful for particle counting, particularly when reference is needed between workers. Also, they are useful for area of specimen determinations. Index Pattern.
Size: 24 mm
Divisions: 20 x 20 Grid of 0.5 mm squares
Electron Microscopy Sciences Matthews Spray Droplet Graticle NE30, Custom
For size and distribution assessments of aersol droplets. Used in conjunction with a 40X Microscope for direct measurements of droplets from 50-400 micron diameters. The actual pattern sizes are 50, 100, 200, and 400 microns. W.H.O. (Details on Request) and G.A. Matthews. Imperial College.
Size: Custom
Electron Microscopy Sciences JEOL SEM Cylinder Mount 1-1/4" surface, 3/8" height, Aluminum
Cylinder specimen mounts are for use with JEOL scanning electron microscopes. The mounts are made from ultra-pure aluminum with a standard lathe finish.
Head: 1-1/4"
Height: 3/8"
Electron Microscopy Sciences Scale with Cross Line Microscope Graticle NE7, 23 mm, 10 mm with 0.1 mm spacing
Used as a horizontal and a vertical scale, they are especially useful when interested in measurement in different axis. Horizontal micrometer scale 10mm long with crosslines at 0.1mm spacing. Surface chrome image.
Size: 23 mm
Divisions: 10 mm with 0.1 mm spacing
Surface: Chrome image