Stands and Rings
Good Lite Company STND PSEUDOISOCHROM TEST 4TH
Standard Pseudoisochromatic Test, 4th Edition (730006)
Chemglass Life Sciences O-Ring, Viton, #104
O-Ring, Viton, #104. Viton o-ring is stocked in brown 75 durometer. They are suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Viton is especially good for vacuum service and low gas permeability and has a useful temperature range of -30 to 200 C. For complete chemical resistance and fluid compatibility, see chart in the specifications tab at the bottom of this listing. FOR VITON O-RINGS USED WITH DURAN FLANGES, SEE CG-147. 2.84mm ID x 2.62mm Cross section.
Chemglass Life Sciences Support Ring with Clamp, Small, 44mm ID, 180mm OAL
Support Ring with Clamp, Small, 44mm ID, 180mm OAL. Solid ring with built in clamp for attachment directly to support rod. Available in three sizes. Nickel plated zinc alloy.
Chemglass Life Sciences Benchtop Support Stand, Assembly Supplied with the Following: Support Frame, Single Base Plate, Support Rods, Cork Rings, 250mL Adapter Plate, and 300mL-1000mL Adapter Plate
Benchtop Support Stand, Assembly Supplied with the Following: Support Frame, Single Base Plate, Support Rods, Cork Rings, 250mL Adapter Plate, and 300mL-1000mL Adapter Plate. Features:• 3/4" Stainless Steel Pipe (1.050" OD) Uprights & Heavy Duty PTFE Coated Aluminum Fittings• All Stainless Steel Uprights are Passivated to Inhibit Corrosion• Middle Support Bracket is Vertically Adjustable and Supplied with a Set of Heavy Duty Clamps• Top Support Bracket is Vertically Adjustable & Provides for Attachment of an Overhead Stirrer. Mounting Clamps Accept a MAX Support Arm Of 5/8” Diameter. • Allows Easy Installation/Removal of Glassware• Compact Foot-Print: 14”W x 15”D x 40”H PLEASE NOTE:• STAND IS SUPPLIED WITH AN ADDITIONAL ADAPTER PLATE TO SUPPORT 300-1,000ML REACTORS.
Grainger 90 Stem Elbow 3/4 x 3/4 Tube PEX White
The Grainger Approved 90° Stem Elbow is a PVC fitting with a 90 degree angle. It has a socket end and a spigot end to connect PVC pipes. The elbow has a maximum temperature rating of 140°F and is made of PVC plastic for corrosion resistance. This elbow fitting allows you to change direction in a PVC pipe system. It is designed for use in industrial plumbing and process piping applications. The elbow has a pressure rating of up to 280 psi and comes in sizes ranging from 1/2" to 4". It meets ASTM D2466 standards.
Grainger Screen Frm Corners 5/16 Wht Pl PK100
The Grainger 170F41 is a 3/4 HP, 115V, single phase, open drip proof motor with a 1075 RPM base speed. It has a 48 frame size, 1.15 service factor, and features a cast iron body with standard foot mounting. The motor is thermally protected and suitable for continuous duty applications.