Clamps
Adjustable devices designed to securely hold two objects together or to hold an object in place; used with standard-taper and ball-and-socket joints, glass and tubing assemblies, and with ring stands. Available as plastic joint clips, stainless steel pinch clamps, and taper clips.
A laboratory clamp is an essential piece of equipment used to support and secure labware and other laboratory apparatus such as flasks, reaction vessels, tubing, thermometers, probes, columns, funnels, and overhead stirrers.
Some laboratory clamps consist of a shaft and boss head, secured with hand-tightened thumbscrews, knurled nuts, or wingnuts onto a supporting rod, stand or scaffold. They may also include two- or three-pronged, adjustable closing jaws designed for gripping objects safely and securely.
Laboratory clamps are constructed of metals such as stainless steel, nickel-plated zinc, plated brass or diecast aluminum alloy for enhanced chemical, heat, and corrosion resistance. However, some components such as the adjusting screws may be made of plastic, and the prongs may also be lined or covered with cork, plastic, glass-fiber, or rubber for enhanced grip with minimal damage or breakage.
Laboratory Clamp Styles and Designs
• Universal, general-purpose clamps that are fully adjustable for accommodating and securing a wide range of items of different sizes such as columns and thermometers
• Retort clamps for securing round-bottom flasks and similar glassware
• Fork clamps for securing and supporting cone-and-socket ground glassware joints
• Three-prong extension clamps, sometimes available with spring-loaded jaws, for holding irregularly shaped or outsized objects
• Specialized clamps for securing burettes and condensers or reaction vessels
• Chain clamps, which incorporate a circular, adjustable chain loop to hold cylinders and beakers
Ace Glass, Inc. Flange clamp, 100mm (4in), SS, quick release, 5/8 x 12in support rod
100mm (4) stainless steel quick release flange clamp with 5/8x12 support rod, for use with two-piece pressure reaction flasks and for heads with flanges.
Ace Glass, Inc. Lab jaws clamp, 3 prong, dual screw, 3.6cm small grip, 4inarm, Troemner 916056
Lab jaws clamp, 3 prong, dual screw, 3.6cm small grip, 4inarm, Troemner 916056
Grainger Strap Fork End 304 SS Cable Size 1/8
The Strap Fork End 304 SS Cable Size 1/8" is a stainless steel cable end fitting designed to terminate 1/8" diameter 7x7 or 7x19 stainless steel cable. It has a forked end that allows the cable to be attached to various connection points. This cable end is made from 304 stainless steel for durability and corrosion resistance. It has a working load limit of 250 lbs and is intended for light duty applications. The overall length is 1-1/4" and it will accommodate 1/8" cable. This cable end provides a finished look when terminating stainless steel cable.
Chemglass Life Sciences Infusion Bottle Clamp, 1, 000mL, for Stackable Incubator Shakers
Infusion Bottle Clamp, 1, 000mL, for Stackable Incubator Shakers
Ace Glass, Inc. Lab jaws clamp and lab frame rod holder, jumbo, heavy duty
Lab jaws clamp and lab frame rod holder, jumbo, heavy duty
MSC Noga Holding Clamp, 4 inch Capacity, M10 x 1.25 Internal Thread
This holding clamp is a C-type open clamp with a 4 inch capacity and an M10 x 1.25 internal thread. It is designed as a lower clamp for stands and serves as an alternative to magnetic bases when the application environment does not permit their use. It is intended to be used with M10 bottom threaded clamps.
- C-type open clamp
- 4 inch clamping capacity
- M10 x 1.25 internal thread
- Designed as a lower clamp for stands
- Provides an alternative to magnetic bases
- Compatible with M10 bottom threaded clamps
Grainger Strap Fork End 304 SS Cable Size 3/32
The Loos Wire Rope Clevis Fitting is a 1/16" clevis fitting made of forged steel with a zinc finish. It has a working load limit of 250 lbs and is rated for general purpose use. The clevis has a 1/16" hole size and fits 1/16" wire rope. Overall length is 1-1/4" and weight is 0.8 lbs. This clevis fitting is ideal for creating an adjustable wire rope assembly and allowing the length to be changed. It can be used in a variety of light duty applications.
Grainger Fork End 304 SS Cable Size 3/32
The Grainger 16X650 is a 16-inch diameter, 650 CFM, direct drive, aluminum exhaust fan. It features a 1/3 HP, 115V motor with permanently lubricated ball bearings and automatic thermal overload protection. The fan has a galvanized steel housing with baked gray enamel finish and comes with wall mounting brackets. It is suitable for commercial and industrial exhaust ventilation applications. The maximum operating temperature is 104°F and it weighs approximately 31 lbs.
Grainger Clamp Steel 1-1/4 In
The Kindorf Angler Pipe Clamp is a steel pipe clamp designed for hanging pipes from ceilings or walls. It has a load capacity of 150 lbs and fits pipe sizes from 1/2" to 2". The clamp is made from high strength steel with a durable powder coat finish and features a unique angled design to provide stability. The clamp opens to fit over the pipe and tightens with a hex nut to firmly grip the pipe. Overall dimensions are 3-1/2" W x 4-1/2" H x 2-3/4" D. This heavy duty clamp securely mounts pipes in commercial, industrial, and residential settings.