Chromatography Autosampler Vial Inserts
Microsolv Technology Corporation Inserts, in Racks. Includes 96, Clear, 500ul Glass Low Volume Precision Inserts with wide conical points. For use in the Micro-Sample Management System. 18/CS.
Inserts are 1st Hydrolytic, Class A, TYPE 33 Borosilicate Glass made for use with the U-2D Micro-Sample Management System. These Inserts have a wide conical point for fast sample filling which minimizes bubble formation. Preloaded in Racks.
Microsolv Technology Corporation Inserts, Low Volume for Vials, Glass. Clear, Deactivated, 700ul fill volume with a conical, precision point and 8x40mm outer dimensions with plastic spring attached. For use in 4ml autosampler vials. 100/PK.
First hydrolytic, Class A, Type 33, Deactivated / Silanized Borosilicate Glass. Features a precision point conical tip for excellent recovery of sample. Residual volume is 8ul with most autosamplers with a 500ul useable volume. Polypropylene springs are attached to keep the inserts center aligned and reduce chances of the needle breaking the inserts during use. This product is manufactured in an ISO 9001:2015 Certified facility. Use with 4ml, 13mm, Screw Top, 15x45mm autosampler vials.
Chemglass Life Sciences Vial, 0.1mL, Glass Insert/Amber Plastic Vial, Standard Opening, Limited Volume, 12x32mm, 11mm Crimp
Vial, 0.1mL, Glass Insert/Amber Plastic Vial, Standard Opening, Limited Volume, 12x32mm, 11mm Crimp.
Chemglass Life Sciences Polypropylene Insert, 0.25mL, BM with Bottom Spring
Polypropylene Insert, 0.25mL, BM with Bottom Spring. Due to the conical design of the snap plug, limited volume inserts used in the shell vial stay centered and straight allowing for easy sample removal.
Chemglass Life Sciences Vial, 0.3mL, Amber with Marking Spot with Fused Insert, Large Opening, 12x32mm, 9mm Thread
Vial, 0.3mL, Amber with Marking Spot with Fused Insert, Large Opening, 12x32mm, 9mm Thread
Chemglass Life Sciences Glass Insert, 0.05mL, BM with Bottom Spring
Glass Insert, 0.05mL, BM with Bottom Spring. Both glass and plastic inserts have been engineered to fit the large opening in vials containing a nominal I.D. of 6mm. Inserts are available assembled with a polymer bottom spring or patented Top Spring™. The polymer spring acts as a shock absorber and provides a cushion against needle contact. The conical design permits complete sample removal.
Bellco Glass, Inc. Inserts are preassembled with a polymer bottom spring. The polymer spring acts as a shock absorbed that protects against breakage if the needle bottoms out. The conical design permits complete sample removal. Conical bottom Sizes: 150
Inserts are preassembled with a polymer bottom spring. The polymer spring acts as a shock absorbed that protects against breakage if the needle bottoms out. The conical design permits complete sample removal. Conical bottom Sizes: 150
Electron Microscopy Sciences Replacement Mesh Inserts, Set of 8
Set of 8 phosphor-bronzed screen inserts for micro-sieve in the following mesh: 25, 35, 45, 60, 80, 120, 170, and 320.
Neta Scientific Agilent 250 ul Inserts with Polymer Feet,100/pk
Agilent Vial insert, 250 uL, glass with polymer feet, 100/pk Insert size: 5.6 x 30 mm - High Recovery Vials & Inserts
UNSPSC Code 41121806
- 58
Neta Scientific Agilent 250ul glass inserts, deactivated 100/PK
Agilent Vial insert, 250 uL, deactivated glass with polymer feet, 100/pk Insert size: 5.6 x 30 mm - High Recovery Vials & Inserts
UNSPSC Code 41121806
- 58
Ace Glass, Inc. PTFE insert, 3/4" NPT, #18 compression fitting16 to 17mm OD tubing
Compression fitting PTFE inserts for 3/4NPT to #18 Ace-Thred. Fits 16 to 17mm O.D. tubing. For use with ACE PTFE reaction vessel heads.