Chromatography Systems
Waters Corp XSelect HSS T3 Method Validation Kit, 100Å, 2.5 µm, 3 mm X 150 mm, 3/pk
This method validation kit consists of three XSelect HSS T3 columns packed with three different batches of sorbent. The XSelect HSS T3 is a low-coverage C18 phase compatible with 100% aqueous mobile phase and should be your first choice when developing separations for polar and non-polar compounds. The XSelect HSS T3 columns exhibit ultra-low MS bleed and are fully scalable and transferable to UPLC separations. Packed in ultra-low dispersion hardware, 2.5 µm eXtended Performance [XP] columns enable exceptional separation performance, robustness and throughput for HPLC assays while enabling a seamless transition path toward UPLC adoption.
Perkin Elmer US LLC Online Mixing Kit for MEINHARD Plus Nebulizers, 0.5 mm I.D. - Orange
Includes: Low dead-volume, fluoropolymer mixing tee 0.5 mm I.D. (Orange) for flow rates > 1 mL/min Internal standard probe and addition line Fluoropolymer peripump fittings Peristaltic pump tubing starter pack for the MP2 micro peristaltic pump Note: The PFA Adapter for Glass nebulizers (N8145365) allows this kit to be used with other types of glass nebulizers.
Waters Corp CORTECS C8 Method Validation Kit, 90à , 1.6 µm, 3 mm X 30 mm, 3/pk
CORTECS C8 Method Validation Kit, 90à , 1.6 µm, 3 mm X 30 mm, 3/pk
Waters Corp CORTECS Shield RP18 Method Validation Kit, 90à , 2.7 µm, 3 mm X 75 mm, 3/pk
CORTECS Shield RP18 Method Validation Kit, 90à , 2.7 µm, 3 mm X 75 mm, 3/pk
Waters Corp CORTECS C8 Method Validation Kit, 90à , 2.7 µm, 4.6 mm X 100 mm, 3/pk
CORTECS C8 Method Validation Kit, 90à , 2.7 µm, 4.6 mm X 100 mm, 3/pk
Waters Corp Dual Spring, MP35N, High Pressure Seal .125 ID (2/pk)
Dual Spring, MP35N, High Pressure Seal .125 ID (2/pk)
Waters Corp Plunger Assembly WAT030547
Replacement Plunger Assembly. The Plunger Assembly for the 1525 HPLC pump is a sapphire rod which requires careful handling. Any nicks or scratches on the plunger can cause early seal wear. Therefore, a damaged plunger should be replaced immediately. Plunger seal (205000202) should also be replaced when replacing plunger.
Waters Corp CORTECS HILIC Method Validation Kit, 90à , 2.7 µm, 3 mm X 100 mm, 3/pk
CORTECS HILIC Method Validation Kit, 90à , 2.7 µm, 3 mm X 100 mm, 3/pk