Bottle and Tube Labels
GA International Permanent Autoclave-Resistant Thermal-Transfer Labels 2" x 4" / 50.8mm x 101.6mm Rectangle Pink From -60°C to +150°C (-76°F to +302°F)
High temperature-resistant permanent labels for identifying various containers and surfaces that undergo autoclaving and dry heat sterilization. Temperature range from -60°C to +150°C (-76°F to +300°F). The labels can be applied to metal, plastic, and glass surfaces and withstand 20 autoclave sterilization cycles at +121°C (+250°F) and 16.5 psi pressure. The labels and the printout can withstand high temperature exposures as well as gamma irradiation (up to 50 KGy) and ethylene oxide sterilization. Ideal for identifying containers and surfaces that need to be sterilized inside autoclaves, dry-heat sterilizing equipment, and with gamma irradiators. Waterproof, weatherproof, thermal-transfer printable.The upper point temperature might slightly vary depending on the duration of the exposure.
GA International Removable Deep-Freeze Labels for Thermal-Transfer Barcode Printers 4" x 4" / 101.6mm x 101.6mm Rectangle White From -80°C to +100°C (-112°F to +212°F)
Deep-freeze, removable barcode labels for vials, tubes, as well as polypropylene and cardboard boxes. The freezer labels have a strong, glove-friendly adhesive that allows them to adhere firmly to containers in (-20°C, -40°C, -80°C) freezers and dry ice while still being easily removable at room temperature without leaving behind any residue.Waterproof and tearproof, these removable deep-freeze labels can also withstand temperatures ranging up to +100°C, making them suitable for general lab use such as the identification of beakers, flasks, boxes, plastic and glass bottles that are stored in fridges and freezers.
GA International Cryogenic Barcode Labels for Liquid Nitrogen Storage 4" x 1" / 101.6mm x 25.4mm Rectangle White From -196°C to +110°C (-321°F to +230°F)
NitroTAG labels are available in a range of sizes and configurations, perfect for identifying small-diameter cryo vials, microtubes and tube tops, cardboard or polypropylene cryo/freezer boxes, cell culture plates, and plastic bags.These thermal-transfer cryogenic labels have a strong permanent adhesive that will remain firmly and permanently attached in ultra-low temperatures. They are designed for long-term cryo-preservation under cryogenic laboratory conditions, including in liquid and vapor phase liquid nitrogen (-196°C/-321°F), freezers (-80°C/-112°F), and dry ice transportation.NitroTAG labels require zero cure time and can be immersed in liquid nitrogen immediately after application without the need for additional tape or lamination. Additionally, these labels are waterproof, weatherproof, and durable. NitroTAG labels will adhere to wet surfaces, resist multiple freeze-thaw cycles, and can withstand elevated temperatures up to +110°C.They are also resistant to spraying wi
GA International Cryogenic Multi Color Labels for 1.5 mL Microtubes 1.02" x 0.4" / 25.9mm x 10.2mm Rectangle Beige From -196°C to +110°C (-321°F to +230°F)
Ideal for the identification of vials, microtubes, plastic bags, and other containers used in deep-freeze storage and color-coding in harsh laboratory environments. These labels are designed for reliable performance in extreme cold conditions, including liquid nitrogen exposure.They write easily with permanent markers—recommended options include MP-1, F-1, and SM-1.
GA International Cryogenic Labels for Inkjet Printers 0.94" x 0.5" + 0.437" (circle) / 23.9mm x 12.7mm + 11.1mm (circle) Rectangle + Circle White From -196°C to +121°C (-321°F to +250°F)
Cryo-JetTAG™ cryogenic inkjet printable labels are ideal for identifying cryo vials, tubes, plastic bags, as well as cardboard and polycarbonate freezer boxes with eye-catching color logos, graphics, images, and data. These cryo labels are designed to withstand prolonged storage in cryogenic conditions, including liquid nitrogen (-196°C/-321°F) and laboratory freezers (-80°C/-112°F). Moreover, these inkjet labels also provide resistance to elevated dry heat and standard steam autoclaves, making them a good choice for use in scientific laboratories.The obtained printout has an impressive resistance to chemicals such as alcohol, acetone, and xylene, as well as to wiping and rubbing with alcohol sanitizing wipes.Various models of roll format inkjet printers can be used for Cryo-JetTAG labels according to the size of the label; These labels also can be written on with ballpoint pens, cryogenic markers, and ink stamped without smudging.
GA International Deep-Freeze Color Dots for Tops of 0.2mL PCR Tubes 0.28" / 7.1mm Circle Moka From -80°C to +110°C (-112°F to +230°F)
Deep-freeze, 0.28” color dot labels designed specifically for the identification of 0.2 ml microtube caps. Waterproof, and with a strong permanent adhesive, these ultra-small diameter deep-freeze labels will resist prolonged freezer storage (-20°C/-4°F; -40°C/-40°F; -80°C/-112°F), refrigeration, and dry ice transport.Lab-Tag™ freezer-grade circle labels are available in 15 colors and packs of 15 assorted colors for color coding and easy identification of samples. Ideal for labeling polypropylene tubes and vials as well as other containers, they can be written on with permanent markers. FDA 21 CFR 175.105 compliant for indirect food contact, they can be used by the food industry for identifying food containers and freezer storage.We also provide these PCR dot labels in roll format for use with thermal-transfer barcode printers. The labels can be printed with serial numbers and 2D barcodes for enhanced sample tracking.
GA International Removable Cryogenic Labels for Laser Printers 1.26" x 0.87" / 32mm x 22.1mm Rectangle Green Apple From -196°C to +120°C (-321°F to +248°F)
Cryogenic thermoplastic laser labels with a glove-friendly removable adhesive. Ideal for long-term storage of samples in liquid nitrogen (on flat surfaces such as polycarbonate cryo boxes) and harsh deep-freeze environments (as low as -80°C; on vials, tubes, freezer boxes, microplates, and others) used in biomedical research and clinical laboratories. Cryo labels accept desktop laser printing and permanent markers. Water-resistant; wear and tear proof; do not jam printers; resistant to UV and gamma irradiation.
GA International Transparent Cryogenic Labels for Thermal-Transfer Printers 1" / 25.4mm Circle Transparent From -196°C to +100°C (-321°F to +212°F)
Transparent thermoplastic cryogenic labels for bio-medical research and clinical laboratories. Withstand long-term storage in deep-freeze and harsh laboratory environments, including liquid and vapor phase liquid nitrogen* (-196°C/-321°F), lab freezers (-80°C/-112°F), and dry ice transportation. Ideal for labeling vials where an unobstructed view of contents is required. Their high temperature and water resistance make these labels perfectly suitable for heated water bath thawing applications. When printed in mirror-image mode, these labels can be applied to the underside of clear plates for easy reading.
GA International Cryogenic Labels (Writable) 0.5" / 12.7mm Circle Green Apple From -196°C to +110°C (-321°F to +230°F)
These small diameter round cryo labels for microtube tops are made with a strong adhesive ideal for liquid nitrogen storage (Subject to prior verification of compatibility of labels and intended vial cap material in Liquid Nitrogen), -80°C freezers and dry ice. Specially designed to comfortably fit cryovials and Eppendorf tube caps. These waterproof deep-freeze dot labels are supplied in roll format and are available in 15 individual colors as well as packs of 15 assorted colors for color-coding and rapid identification.
GA International Deep-Freeze Color Dots for Tops of 0.2mL PCR Tubes 0.28" / 7.1mm Circle Yellow From -80°C to +110°C (-112°F to +230°F)
Deep-freeze, 0.28” color dot labels designed specifically for the identification of 0.2 ml microtube caps. Waterproof, and with a strong permanent adhesive, these ultra-small diameter deep-freeze labels will resist prolonged freezer storage (-20°C/-4°F; -40°C/-40°F; -80°C/-112°F), refrigeration, and dry ice transport.Lab-Tag™ freezer-grade circle labels are available in 15 colors and packs of 15 assorted colors for color coding and easy identification of samples. Ideal for labeling polypropylene tubes and vials as well as other containers, they can be written on with permanent markers. FDA 21 CFR 175.105 compliant for indirect food contact, they can be used by the food industry for identifying food containers and freezer storage.We also provide these PCR dot labels in roll format for use with thermal-transfer barcode printers. The labels can be printed with serial numbers and 2D barcodes for enhanced sample tracking.
GA International Cryogenic Barcode Labels for Liquid Nitrogen Storage 0.5" / 12.7mm Circle Red From -196°C to +110°C (-321°F to +230°F)
NitroTAG labels are available in a range of sizes and configurations, perfect for identifying small-diameter cryo vials, microtubes and tube tops, cardboard or polypropylene cryo/freezer boxes, cell culture plates, and plastic bags.These thermal-transfer cryogenic labels have a strong permanent adhesive that will remain firmly and permanently attached in ultra-low temperatures. They are designed for long-term cryo-preservation under cryogenic laboratory conditions, including in liquid and vapor phase liquid nitrogen (-196°C/-321°F), freezers (-80°C/-112°F), and dry ice transportation.NitroTAG labels require zero cure time and can be immersed in liquid nitrogen immediately after application without the need for additional tape or lamination. Additionally, these labels are waterproof, weatherproof, and durable. NitroTAG labels will adhere to wet surfaces, resist multiple freeze-thaw cycles, and can withstand elevated temperatures up to +110°C.They are also resistant to spraying wi
GA International Cryogenic Barcode Labels for Liquid Nitrogen Storage 1.18" x 0.31" + 0.37" (circle) / 30mm x 7.9mm + 9.4mm (circle) Rectangle + Circle White From -196°C to +110°C (-321°F to +230°F)
NitroTAG labels are available in a range of sizes and configurations, perfect for identifying small-diameter cryo vials, microtubes and tube tops, cardboard or polypropylene cryo/freezer boxes, cell culture plates, and plastic bags.These thermal-transfer cryogenic labels have a strong permanent adhesive that will remain firmly and permanently attached in ultra-low temperatures. They are designed for long-term cryo-preservation under cryogenic laboratory conditions, including in liquid and vapor phase liquid nitrogen (-196°C/-321°F), freezers (-80°C/-112°F), and dry ice transportation.NitroTAG labels require zero cure time and can be immersed in liquid nitrogen immediately after application without the need for additional tape or lamination. Additionally, these labels are waterproof, weatherproof, and durable. NitroTAG labels will adhere to wet surfaces, resist multiple freeze-thaw cycles, and can withstand elevated temperatures up to +110°C.They are also resistant to spraying wi
GA International Transparent Permanent Cryogenic & Autoclave-Resistant Laser Labels 1.75" x 0.5" / 44.5mm x 12.7mm Rectangle Transparent From -196°C to +150°C (-321°F to +302°F)
Cryogenic thermoplastic transparent laser labels for long-term storage in liquid nitrogen and deep-freeze harsh environments for biomedical research and clinical laboratories. The labels are also resistant to steam autoclave sterilization and boiling water. These transparent cryo labels accept desktop laser printing and permanent marker. Water-resistant; Wear and tear proof; Do not jam printers; Resistant to UV and gamma irradiation.
GA International Cryogenic Color Dots for Tops of 0.5 mL & 1.5 mL Microtubes 0.44" / 11.2mm Circle Lemon From -196°C to +110°C (-321°F to +230°F)
These small diameter round cryo labels for microtube tops are made with a strong adhesive ideal for -80°C freezers, dry ice, and liquid nitrogen storage. Specially designed to comfortably fit 0.5 ml, 0.6 ml, and 1.5 ml Eppendorf tube caps and microtubes, these circular, waterproof, cryo dot labels have a permanent adhesive that can withstand prolonged storage inside ultra-low temperature freezers. The freezer dot labels are supplied as Hagaki sheets and are available in 15 individual colors as well as packs of 15 assorted colors for color coding and rapid identification.
GA International Removable Deep-Freeze Labels for Thermal-Transfer Barcode Printers 1.5" x 2.5" / 38.1mm x 63.5mm Rectangle White From -80°C to +100°C (-112°F to +212°F)
Deep-freeze, removable barcode labels for vials, tubes, as well as polypropylene and cardboard boxes. The freezer labels have a strong, glove-friendly adhesive that allows them to adhere firmly to containers in (-20°C, -40°C, -80°C) freezers and dry ice while still being easily removable at room temperature without leaving behind any residue.Waterproof and tearproof, these removable deep-freeze labels can also withstand temperatures ranging up to +100°C, making them suitable for general lab use such as the identification of beakers, flasks, boxes, plastic and glass bottles that are stored in fridges and freezers.