Freezer Storage Racks
Freezer storage racks help you make efficient use of space in chest and upright freezers, deep freezers, undercounter and ultra-low temperature freezers. To help you organize and optimize your storage, freezer storage racks, towers and shelf kits can be modular or color-coded for easy identification. Freezer baskets can be made from stainless steel, non-corrosive aluminum, clear acrylic or polycarbonate.
Freezer door opening time is typically limited to help maintain freezer temperatures, and racks can help users quickly access specific samples. Racks also allow users to temporarily remove a section of samples from the freezer without exposing the remainder to unwanted temperature changes.
Freezer racks may have horizontal access (for upright freezers) or vertical openings (for chest freezers). Some are wire baskets or sliding drawers and some have wheels to facilitate movement. Freezer storage racks may also have locks for security. For liquid nitrogen storage, racks may be “canes” or “straws” that hold multiple tubes in an upright position.
For optimal storage, choose racks designed to fit your particular freezer model or product. Racks are also made to fit specific sizes of freezer boxes. Most freezer boxes are roughly 5 inches square, but heights range from 2 to 5 inches depending on the size of tubes they hold.
Med Vet International McKesson Ultrasound Probe Cover, 1 X 9 Inch, 16-1007, 2000/Case
Ultrasound Probe Cover McKesson 1 X 9 Inch Polyurethane NonSterile For use with Ultrasound Probe Used as hygienic protection for ultrasound probes during ultrasound examinations Facilitates accurate ultrasound detection, while assisting in prevention of cross-contamination Straight-walled with a smooth surface and round end Non-lubricated rolled sheath
Alkali Scientific™ Upright Freezer Drawer Rack for 96-well & 384-well Microtiter Plates, Holds 45 with Lids, 60 without Lids, 10 15/16 x 12 1/8 x 5 7/16"
For 96-Well and 384-Well Microtiter Plates For Speciality Tube Racks (Matrix, Micronic, Fluidx, Abgene) H: 11/16″-2 1/8″ (17.3-53.5mm) Upright Freezer Drawer Racks for 96-Well & 384-Well Microtiter Plates, 96-Well Microtube Boxes and Micronics ROBO Racks are constructed of corrosion resistant stainless steel. Racks include handles and identification card holders. Drawer style rack design allows easy access to fewer microtiter plates at a time thus protecting other samples in the rack from warming up. Plate Capacity: 45 with lids 60 without lids 3×5 Configuration Dimensions (DxWxH): 11 1/8 x 5 7/16 x 12 1/8 inches (282 x 138 x 308mm)Compartment Dimensions: 3 1/2 x 5 1/8 x 2 3/16 inches (89 x 130 x 55.8mm) **Lock device is ordered separately.
Research Products International Corp Chest Freezer Rack for Cardboard Boxes Containing 15 ml or 50 ml Tubes, 6 x 6 x 24 3/4 Inches
Maximize your freezer storage with a stainless steel freezer rack. The freezer rack can fit 5 3/4 inch square boxes with a 4 3/4 inch height.
Research Products International Corp Slide-Out Freezer Rack for 2"" H Boxes, 16 Box Capacity, 4x4 Array, 22 x 5 1/2 x 9 3/4H
Ideal freezer racks feature slide out trays that maximize storage space in upright freezers or refrigerators. Constructed of corrosion resistant stainless steel for rugged durability. Racks will accommodate all 5" square x 2" high cardboard or plastic boxes. Racks are available in several convenient sizes and capacities.
Chemglass Life Sciences Freezer Box, Hinged Lid, Purple, 100-Place, Complete with Dividers
Freezer Box, Hinged Lid, Purple, 100-Place, Complete with Dividers. New FlipTop™ hinged lid boxes are made of recyclable cardboard, with a liquid resistant outer coating. They are shipped fully assembled with 81 place or 100 place cardboard dividers. Each box has drain slots on the bottom surface and numbered grid markings in almost every conceivable location (top, bottom, sides, etc.). 5-1/4 x 5-1/4 x 2 Inches - Standard Size, for Existing Racks. Alpha-Numeric Coding - Top, Sides and Bottom
CRYSTAL TECHNOLOGY AND INDUSTRIES Upright Freezer Rack, Mixed Use Storage, Various Tubes, Bottles, Boxes, Rack Dims 22 1/16L x 11H x 5 7/16W" (560 x 280 x 138mm) Drawer Area 21 9/16 x 10 15/16 x 5 3/16" (548 x 278 x 132mm)
Rack Designed to store a variety of tubes,bottles, Boxes etc. in 1 Bin, made of corrosion resistant stainless steel, with Lifetime Warranty, Double Welds and Smooth Edges, many other sizes of Upright and Chest Freezer Racks as well as Canisters and Frames for LN2 Tanks available. Custom Rack Design Services available. Security lock devices available for each rack. Great for organizing -20⁰, -30⁰ , -86⁰ Freezers and Cold Rooms
Alkali Scientific™ Upright Freezer Drawer Rack for 96 Deep-Well Microtiter Boxes; 5 x 3 Configuration, 15 Box Capacity
For 96 Deep-Well Microtiter PlatesFor Speciality Tube Racks (Matrix, Micronic,Fluidx) H: 9/16″-1 3/4″ (14.4-44.9mm) Our Upright Freezer Drawer Racks are constructed of high-quality, corrosion resistant stainless steel. Durable stainless steel freezer racks facilitate organization and maximize valuable storage space.. Handles at both ends accommodate freezers with right or left handed doors. Racks are for 96 Deep-Well Microtiter Boxes. Our freezer racks have been configured to fit all major ultra low (-80°) freezers on the market; racks are designed for ultra low upright freezers. Dimensions (DxWxH): 18 3/16 x 5 7/16 x 6 1/16 inches (462 x 138 x 154mm)Compartment Dimensions (l x h x w): 3 1/2 x 1 3/4 x 5 1/8 inch (89.4 x 45.4 x 130mm)
Alkali Scientific Stainless Steel Freezer Racks
The Vertical Freezer Racks for 50 Cell Hinge Lid Storage Boxes are designed to provide a secure and efficient storage solution for laboratories looking to organize and preserve samples in 50 cell hinge lid storage boxes within vertical freezer environments These racks are tailored to enhance space utilization facilitate easy access and ensure the longevity and integrity of stored samples Product Features Optimized for 50 Cell Hinge Lid Boxes These freezer racks are specifically engineered to accommodate 100 cell hinge lid storage boxes ensuring a snug and secure fit This design minimizes movement and provides optimal protection for the samples stored within Enhanced Space Efficiency The vertical orientation of the racks maximizes the use of vertical space within freezers significantly increasing storage capacity without sacrificing accessibility This allows laboratories to store a greater number of samples in a limited space improving organization and efficiency Robust Constructi
Cole-Parmer Argos Technologies PolarSafe 2D Storage Box, 81 Place for 2 mL Cryovials; 1/Ea
The PolarSafe polycarbonate storage boxes work in conjuciton with the 2D tubes to provide automatic identification of both the box and stored vials. Each box features a 2D Datamatrix code on the bottom of the box as well as a laser engraved Code 128 barcode on the side. These boxes are available in "short" (for 2mL tubes) or "tall" designs (for 5mL tubes). White grid and blue grid options are available for quick and easy identification.
Cole-Parmer Argos Technologies PolarSafe Upright Freezer Rack for 96-Well Microtube Boxes or Boxes w/ 2 1/8" Max H, 5 x 4 Array
These upright freezer racks come with a locking rod to securely hold boxes in place. Boxes can be accessed from either side of rack, which has handles on both sides to accommodate freezers with left- or right-handed doors. They are crafted of corrosion-resist stainless steel for long-term use.
Cole-Parmer Argos Technologies PolarSafe 2D Storage Box, 100 Place for 2 mL Cryovials; 1/Ea
The PolarSafe polycarbonate storage boxes work in conjuciton with the 2D tubes to provide automatic identification of both the box and stored vials. Each box features a 2D Datamatrix code on the bottom of the box as well as a laser engraved Code 128 barcode on the side. These boxes are available in "short" (for 2mL tubes) or "tall" designs (for 5mL tubes). White grid and blue grid options are available for quick and easy identification.
Alkali Scientific™ Upright Stainless-Steel Freezer Rack for 50-Cell Hinged Top Plastic Boxes, 3 x 5 Configuration, 15 Box Capacity
For 50-Cell Hinged Top Plastic Boxes The Alkali Scientific™ Upright Stainless Steel Freezer Rack is an essential storage solution engineered to optimize the organization and accessibility of samples stored in 50-cell hinged top plastic boxes within upright freezers. This drawer rack system is designed to enhance the efficiency and capacity of sample storage, making it an invaluable tool for laboratories seeking to maintain high standards of sample integrity and organization Dimensions L x H x W: 10 15/16 x 12 5/8 x 5 7/8 Inch (278 x 320 x 150mm)Compartment Size l x h x w: 3 1/2 x 2 5/16 x 5 9/16 Inch (88.5 x 58 x 142mm)
Cole-Parmer Argos Technologies PolarSafe Upright Freezer Drawer Rack for Standard 3" Boxes, 4 x 4 Array
Racks feature handles at both ends to accommodate freezers with right- or left-handed doors. Drawer racks facilitate access to samples without having to remove the entire rack from the freezer. Easily retrieve sample boxes by simply sliding out the individual rack drawer and then sliding the boxes out from either side of the rack.
Cole-Parmer Argos Technologies PolarSafe Upright Freezer Rack for 96-Well Microtube Boxes or Boxes w/ 2 1/8" Max H, 6 x 4 Array
These upright freezer racks come with a locking rod to securely hold boxes in place. Boxes can be accessed from either side of rack, which has handles on both sides to accommodate freezers with left- or right-handed doors. They are crafted of corrosion-resist stainless steel for long-term use.
Cole-Parmer Argos Technologies PolarSafe Metal Freezer Box, Stainless Steel, 2"; 1/Ea
These metal freezer boxes are guaranteed not to rust. They feature drain holes, making them ideal for storing samples in most liquid nitrogen tanks offered on the market. They are available in stainless steel or aluminum and can be stored in the same rack configurations as the 2 and 3 cardboard boxes. Cardboard dividers can be added depending on the application.