Muffle Furnaces
Yamato Scientific America, Inc. Yamato 23.6L Standard Muffle Furnace with Communication Port, 220V
Standard 23.6L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C.
Mti Corporation 1100C COMPACT MUFFLE FURNACE
- Maximum temperature: 1100 °C (< 1 hour)
- Continuous temperature: 1000 °C
- Chamber dimensions: 100 mm x 105 mm x 130 mm
- Chamber capacity: 1 liter (65 in³)
- Overall dimensions (door closed): 230 mm x 200 mm x 360 mm
- Overall dimensions (door open): 230 mm x 440 mm x 360 mm
- Insulation type: High-purity fibrous alumina
- Energy consumption reduction: 30%
- Door type: Drop-down
- Safety features: Automatic power-off on door open, over-heating protection, broken thermocouple protection
- Controller type: PID automatic control with auto-tune function
- Programmable segments: 30
- Rated voltage: 110V AC
- Power: 950 W (15A fuse)
- Power plug: NEMA 5-15P
- Heating rate: Up to 30 °C/min
- Controller panel size: 48 mm x 48 mm (digital)
- Optional features: Gas inlet/outlet ports for purging (extra cost)
Cole-Parmer 1921303-31-010T Conductivity Cell; K=1.0; Epoxy, In-Line; 100 Ohm Pt RTD ATC
These 10-foot cables with stripped ends are economical replacements for a variety of controllers. There are flow-through, in-line, swage, and dip styles available.
NABERTHERM INC The muffle furnaces are for daily laboratory use. They stand out for their excellent workmanship and high level of reliability. Can come equipped with a flap door or lift door at no extra charge.
The muffle furnaces are for daily lab use, outstanding workmanship, high level of reliability, non-classified fiber insulation, housing made of structured stainless steel, heating from two sides (three sides L24/11-LT60/12), either flap (L) or lift door (LT)
Thermo Scientific™ Lindberg/Blue M™ Moldatherm™ Box Furnace PROMO
Minimize outer surface temperatures while maintaining uniform heat distribution within the chamber. Suitable for a variety of industrial and laboratory applications.