Incubators
Bellco Glass, Inc. Vactrap G, 2L + 1L, Glass Bottles, Red Bin, GL45 Cap w/1/4" ID Tubingg, 1/EA
Vactrap G (Glass) is the ultimate vacuum trap system, adhering to the strictest CDC recommendations for laboratory safety. With its new continuous full vacuum rating, it is ideal for protecting vacuum lines and users. Vactrap G safely contains waste produced during supernatant removal, chemical separation, and cell or tissue culture media aspiration.Following in the footsteps of previous innovations, Vactrap G combines ease-of-use with revolutionary options and features to produce a new step forward in vacuum trap technology. From PUREGRIP glass media bottle versions to the inclusion of tangle-free VersaCap closures, to a brand new extra length tube, scientists now have access to better solutions at a lower cost.
Being Scientific BIC-120C - 4.2 cu ft (120 liters),14 - 176 ℉ , -10 - 80℃
BEING Cooling Incubators allow users to carry out applications that require temperatures ranging from -10° to +80°C. These incubators are ideal for biochemical oxygen demand (BOD) testing, bacterial research, seed germination, fish/insect breeding and much more. The BEING Cooling Incubator provides accurate and dependable temperature control. Each cooling incubator uses environmentally friendly refrigerants that ensure rapid cooling does not come at the expense of the environment.
Being Scientific BIF-55 - 2.0 Cuft (56 Liters), Temperature Range : Amb +5°C - 80°C
Laboratory incubator applications are diverse because of the many different industries and protocols they are used for, so we have designed the BEING LAB Incubator family to accommodate a wide range of applications. The BEING Controller guarantees temperature accuracy and control. We engineer the best safety features into all our products assuring piece of mind to our customers.
Percival Scientific Biological Incubator, I66LLVLH3, 62.4 cu. ft., vertical IncuWhite LED lighting, 4 tiers, pan-type hum., dehum. and electronic RH sensor, 4-44° C ±0.5°, IntellusUltra controller
The I66LLVLH3 incubator is frequently used for mosquitos, other insects, low light algae growth or low cost seed germination. IncuWhite LEDs are dimmable between 5-100% output with up to 230 µmoles/m2/s irradiance @ 6” from the LEDs. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Pan-type humidifier, dehumidifier, and standard sensor maintain optimal humidity. Eight white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. For additional options contact sales@percival-scientific.com for a free consultation.
Grainger Block 54 X 0.5Ml
The Grainger 30-Piece Wire Harness Assortment is a set of 30 different wire harnesses. The wire harnesses are made of PVC insulated wire and measure 12 inches in length. The wire gauge sizes range from 16 AWG to 24 AWG. The wire harness terminals include male and female disconnects, ring terminals, butt connectors, and blade terminals. This assortment of wire harnesses can be used for a variety of electrical wiring projects. The set is manufactured in the USA and is UL and CSA listed.
Bellco Glass, Inc. Vent Filter, 1.00um, Non-Sterile, 5/PK
EZFlow 1.0µm PTFE Vent Filter, 50mm PP Housing, 1/4" to 1/2" Stepped Barb, Non Sterile, 25/PK Carboy Vent Filters are used for hydrophobic venting and solvent filtration applications. The PTFE filter membrane is ideal for maintaining purified water stored in carboys, or for sterile venting during a slow exhaust/liquid autoclave cycle of EZgrip carboys.Hydrophobic PTFE membrane is reinforced with polypropylene housing and features a stepped hosebarb. Available in Non-sterile 1.00µm, 0.2µm pore sizes with platinum-cured silicone tubing, or in bulk packs (without tubing).Hydrophobic PTFE membrane reinforced in polypropyleneAvailable in 1.00µm and 0.2µm pore sizesAutoclavable up to 10 timesUSP Class VIFDA ApprovedAutoclavableMade in the USASpecificationsCasing Material: PolypropyleneFilter Material: PTFEFilter Pore Size: 1.0µm
USA Scientific Inc Thermoblock for 24x12 mm tubes
Mixer HC thermoblock for 24 x 12 mm diameter tubes
USA Scientific Inc Thermoblock for 0.5 mL tubes
Mixer HC thermoblock for 24 x 0.5 mL microcentrifuge tubes. Includes one ISO Rack.
USA Scientific Inc Mini DryBath blck .2mL tube
Mini Dry Bath Blocks, 40-place block for 0.2 mL PCR tubes
Bellco Glass, Inc. Vactrap Tubing 16Ft, , w/1/4" ID Tubing, 0.2 micron PTFE Vent Filter, 1/EA
Vactrap2 is the world’s most advanced vacuum trap system. Ideal for the protection of vacuum lines and scientists alike, Vactrap2 safely contains waste from supernatant removal, chemical separation, and cell or tissue culture media aspiration. Best of all, Vactrap2 comes ready to use; simply attach to your vacuum and begin your work.Vactrap2 tubing extensions allow users to replace or extend the tubing connecting their Vactrap2 system to their vacuum. NEW Improved heavy-duty EZBio TPE V tubing to avoid kinking. Each extension includes a replacement inline vent filter. The Vactrap Extension is suitable exclusively for systems equipped with Plastic Bottles. For more replacement vent filters, search ” vent filter”.Say goodbye to glass. Say hello to Vactrap2 .Specifications:Tube length: 16′Tube Diameter: 3/8″FDA Approved Autoclavable Made in the USA
Bellco Glass, Inc. VacTrap, 1L, PP, Red Bin, 1/4" ID Tubing, 1/EA
VacTrap, 1L, PP, Red Bin, 1/4" ID Tubing, 1/EA