Vacuum Ovens
Biosurface Technologies Corp CBR W/ STANDARD STIR PLATE
The CDC Biofilm Reactor® consists of eight (8) polypropylene coupon holder rods suspended from a UHMW-polyethylene ported lid. Each coupon holder rod can accommodate three (3) 1/2-inch (12.7 mm) diameter coupons, for a total of twenty-four(24) coupons. The lid (with coupon holders and coupons) is mounted in a 1-liter glass vessel with side-arm discharge port. A liquid growth media or biocide is circulated through the vessel while mixing and shear is generated by a magnetic stir bar and vane rotated by a magnetic stir plate.Sampling of the coupons is conducted by aseptically removing individual coupon holder rods with accompanying coupons (3). The coupon holder (or blank) rod is replaced in the lid after sampling to allow the time-course experiment to continue. The coupon removed from the reactor vessel is then used for treatment evaluations, scraped or vortexed to collect the biofilm sample for further study.ĉĉĉĉĉĉĉĉĉĉCDC Biofilm Reactor with Standard Stir Plate, Mid- to High-Shear Laboratory Biofilm Growth Device, BioSurface Technologies Corporation.ĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉ02-Apr-25 08:00:59:000 PMĉ
Sheldon Manufacturing Inc VAC OVEN, 1.7CUFT,120V
ECONOMY VACUUM OVEN, 1.7 CU FT, 115V SHEL LAB vacuum ovens provide exceptional capabilities for fast and gentle drying of heat sensitive materials. They prevent residue accumulation on products and also allow safe drying of materials at lower temperatures than typically required when using convection ovens. Please note that this vacuum oven does not include a pump or related accessories. Contact your SHEL LAB distributor for assistance with choosing the ideal pump and accessories for any application. More information available at www.shellab.com
YAMATO SCIENTIFIC AMERICA INC VAC OVEN PROGRAMMABLE 27L 115V
50-189-8031 VAC OVEN PROGRAMMABLE 27L 115V
Biosurface Technologies Corp AN. CBR W/ STANDARD STIR PLATE
The CDC Biofilm Reactor® consists of eight (8) polypropylene coupon holder rods suspended from a UHMW-polyethylene ported lid. Each coupon holder rod can accommodate three (3) 1/2-inch (12.7 mm) diameter coupons, for a total of twenty-four(24) coupons. The lid (with coupon holders and coupons) is mounted in a 1-liter glass vessel with side-arm discharge port. A liquid growth media or biocide is circulated through the vessel while mixing and shear is generated by a magnetic stir bar and vane rotated by a magnetic stir plate.Sampling of the coupons is conducted by aseptically removing individual coupon holder rods with accompanying coupons (3). The coupon holder (or blank) rod is replaced in the lid after sampling to allow the time-course experiment to continue. The coupon removed from the reactor vessel is then used for treatment evaluations, scraped or vortexed to collect the biofilm sample for further study.ĉĉĉĉĉĉĉĉĉĉAnaerobic CDC Biofilm Reactor with Standard Stir Plate, Mid- to High-Shear Laboratory Biofilm Growth Device, BioSurface Technologies Corporation.ĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉ02-Apr-25 08:00:59:000 PMĉ
Biosurface Technologies Corp CBR W/ 220 STANDARD STIR PLATE
The CDC Biofilm Reactor® consists of eight (8) polypropylene coupon holder rods suspended from a UHMW-polyethylene ported lid. Each coupon holder rod can accommodate three (3) 1/2-inch (12.7 mm) diameter coupons, for a total of twenty-four(24) coupons. The lid (with coupon holders and coupons) is mounted in a 1-liter glass vessel with side-arm discharge port. A liquid growth media or biocide is circulated through the vessel while mixing and shear is generated by a magnetic stir bar and vane rotated by a magnetic stir plate.Sampling of the coupons is conducted by aseptically removing individual coupon holder rods with accompanying coupons (3). The coupon holder (or blank) rod is replaced in the lid after sampling to allow the time-course experiment to continue. The coupon removed from the reactor vessel is then used for treatment evaluations, scraped or vortexed to collect the biofilm sample for further study.ĉĉĉĉĉĉĉĉĉĉCDC Biofilm Reactor with 220V Standard Stir Plate, Mid- to High-Shear Laboratory Biofilm Growth Device, BioSurface Technologies Corporation.ĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉ02-Apr-25 08:00:59:000 PMĉ
Biosurface Technologies Corp AN. CBR W/ 220 STANDARD STIR
The CDC Biofilm Reactor® consists of eight (8) polypropylene coupon holder rods suspended from a UHMW-polyethylene ported lid. Each coupon holder rod can accommodate three (3) 1/2-inch (12.7 mm) diameter coupons, for a total of twenty-four(24) coupons. The lid (with coupon holders and coupons) is mounted in a 1-liter glass vessel with side-arm discharge port. A liquid growth media or biocide is circulated through the vessel while mixing and shear is generated by a magnetic stir bar and vane rotated by a magnetic stir plate.Sampling of the coupons is conducted by aseptically removing individual coupon holder rods with accompanying coupons (3). The coupon holder (or blank) rod is replaced in the lid after sampling to allow the time-course experiment to continue. The coupon removed from the reactor vessel is then used for treatment evaluations, scraped or vortexed to collect the biofilm sample for further study.ĉĉĉĉĉĉĉĉĉĉAnaerobic CDC Biofilm Reactor with 220V Standard Stir Plate, Mid- to High-Shear Laboratory Biofilm Growth Device, BioSurface Technologies Corporation.ĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉ02-Apr-25 08:00:59:000 PMĉ
Fisherbrand™ Isotemp™ Model 282A Vacuum Oven
Ideal for general vacuum drying and heating applications.
Across International Accutemp AT19-UL Vacuum Oven
The AccuTemp 1.9 cu ft vacuum oven comes standard with the secondary over-temp protection dial, all stainless steel tubing/compression fittings, stainless steel vacuum/vent valve, oil-filled vacuum gauge, 5 sided pad heating technology and two year warranty. The thermal-conductive aluminum shelves provide excellent temperature uniformity inside the chamber, while our 3rd gen LCD low proportional gain temperature controllers keep your oven temperature within ±1°F accuracy, in either °F or °C.