General Purpose Water Baths
Sigma Aldrich Fine Chemicals Biosciences MyBlockTM mini dry bath bl1EA
To fit MyBlock mini dry bath/block heater.
Grainger Water Bath 4L 20.32 x15.79 x32.2
The Benchmark Scientific 4L Water Bath is a general purpose laboratory water bath with a 4 liter capacity stainless steel tank. It has a temperature range of ambient +5 to 99.9°C, stability of ±0.1°C, and uniformity of ±0.5°C. This water bath has over-temperature protection, low liquid level protection, and a front panel digital PID controller. It measures 11.4 x 10.2 x 6.3 inches (WxDxH) and weighs 7.7 lbs. This 120V water bath is CE & RoHS compliant.
Cole-Parmer Stuart Digital Water Bath, stainless steel, 15 L, 230 VAC
These utility baths feature a clear LED temperature display with an analog dial, making set point adjustments quick and ensuring accurate temperature control. Polycarbonate lid provides full view of bath contents and reduces heat loss. Low water level sensor prevents dry boiling, and overtemperature protection system monitors temperature and controls heater in the event of a fault.
Built-in drain empties stainless steel tank for water changes and maintenance. The heater is mounted beneath the tank, so it is not in the way.
Yamato Scientific America, Inc. Yamato 4L Constant Temperature Water Bath, Analog, 115V
Easy to use, compact design, 4L water bath. Analog set up system . Thermometer is included to verify actual temperature. Protected water tank prevents burns caused by contact. Temperature range: ambient +5~95°C.
Cole-Parmer Techne FFLAT18 Bath Lid, Flat, for 18 and 26 Liter Baths
Lids, trays, temperature probes, and other accessories for your bath.
Thomas Scientific MyBath 4L Digital Water Bath, 115V
This compact 4 liter water bath features easy to use controls that allow the user to digitally select and monitor temperature. Its hinged lid provides a secure, covered environment and can be flipped open (to the rear) or completely and instantly removed at the user's option.
Electron Microscopy Sciences EMS MyBath™ Water Bath, 8L, 115V, Ambient +5 to 100°C temp range
MyBath is designed to guarantee superior accuracy and performance in a compact footprint. MyBath models feature seamless, stainless steel chambers for easy cleaning and long life. The chambers resist rust and have no corners to collect dirt or contamination.
Adjustable in 0.1 degree C increments, the temperature is shown on a large, 3-digit display. The Quik-CAL allows for simple, in-lab calibration. High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch. Easy to use controls to digitally select and monitor settings. Drains for water changes.
Temp range: Ambient +5 to 100°C
Accuracy: ± 0.5°C at 37°C
Increment: 0.1°C
Uniformity: ± 0.2°C at 37°C
Chamber: 12.8 (W) x 10.4 (D) x 5.9 (H)"
Electron Microscopy Sciences EMS MyBath™ Water Bath, 12L, 115V, Ambient +5 to 100°C temp range
MyBath is designed to guarantee superior accuracy and performance in a compact footprint. MyBath models feature seamless, stainless steel chambers for easy cleaning and long life. The chambers resist rust and have no corners to collect dirt or contamination.
Adjustable in 0.1 degree C increments, the temperature is shown on a large, 3-digit display. The Quik-CAL allows for simple, in-lab calibration. High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch. Easy to use controls to digitally select and monitor settings. Drains for water changes.
Temp range: Ambient +5 to 100°C
Accuracy: ± 0.5°C at 37°C
Increment: 0.1°C
Uniformity: ± 0.2°C at 37°C
Chamber: 12.8 (W) x 10.4 (D) x 7.9 (H)"
Cole-Parmer Revolutionary Science Dual-Chamber Poly Water Bath, 5.5L (each), 90 C; 120VAC
This economical dual-chamber bath provides you the flexibility of performing two different temperature based experiments simultaneously. Separate chambers allow you to set the temperature independently from ambient to 90° C, without temperature interference from the other bath. The dual 5.5 liter chambers allow you to heat samples of varying sizes. Each chamber has its own digital temperature display for easy setting and read-out. Each chamber interior is made from chemical and corrosion-resistant polypropylene, allowing for easy clean-up and durability. The rugged exterior resists dents, cracking, and chemicals. Low-level sensor automatically shuts the bath down and sounds an alarm if the water level goes below 1-inch.
Being Scientific BWB-0510 - 5L/10L, Dual Chamber Water Bath, Temperature Range:Amb+5℃ - 99℃
BEING Scientific General Purpose Laboratory Water Baths provide users with a constant temperature environment that only can be obtained when samples are totally immersed in water. Our line of lab water baths come in a variety of sizes and are suitable for direct heating and auxiliary heating of biological, chemical, physical, plant, chemical, and other experimental samples. Ideal applications for each Being Water Bath include routine laboratory temperature control, E.Coli detection, sample thawing, bacterial detection, incubation microbial experiments, cell culture, and food testing pretreatment.
Sigma Aldrich Fine Chemicals Biosciences MyBathTM Digital Water Bat1EA
MyBath water bath features easy to use controls that allow the user to digitally select and monitor temperatureThe temperature is shown on a large 3-digit display Accuracy /- 0.5C. Increments 0.1C. Uniformity /- 0.2CTest tube rack inserts are sold separatelyHinged lid provides a secure covered environment and can be flipped open (to the rear) or completely and instantly removedDrain allows for hassle-free water changesQuik-CAL user calibration functionSeamless stainless steel chamber the chambers resist rust and have no corners to collect dirt or contamination
Being Scientific BWZ-1 - 1.7 cu ft (48 Liters), Ambient+5 - 100℃, 17.1x12.5x9.5 (inch)435x317x250 (mm)
The BEING BWZ shaking water baths combine a general-purpose water bath with a reciprocating shaker motion to provide gentle stirring with precise laboratory temperature control suitable for direct and auxiliary heating of biological, chemical, physical, plant, chemical, and other experimental samples for Escherichia coli detection, sample thawing, bacterial detection, incubation microbial experiments, cell culture, food testing pretreatment, and more.