Beakers and Lids
Ace Glass, Inc. 2000mL pressure vessel body, one-piece, jacketed, #25 center, (3) #15, (1) #7 side necks, round bottom, 28/15 O-ring ball joints on inlet/outlet
2000mL one-piece jacketed round bottom pressure vessel with a #25 center neck, (3) #15 and (1) #7 side necks, and a 28/15 o-ring ball joint on the inlet/outlet. Vessel is part of pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Rated at 45psi at 100 degrees Centigrade.
Chemglass Life Sciences Chemglass 5,000 mL Heavy-Wall 3-Neck Round Bottom Flask - center joint 45/50, two side joints 29/42 (CG-1522-22)
Chemglass CG-1522-22 is a 5,000 mL heavy-wall, three-neck round-bottom flask designed for laboratory synthesis, distillation, and reflux. It features standard-taper outer joints and vertical side necks for secure multi-component assemblies.
- Capacity: 5,000 mL (5 L).
- Neck configuration: three-neck round-bottom flask with one center neck and two side necks.
- Joint sizes: center neck 45/50 outer; side necks 29/42 outer.
- Wall type: heavy wall for reinforced durability.
- Neck orientation: vertical side necks with standard taper outer joints.
- Country of origin: made in the United States.
Bellco Glass, Inc. Sealing Films prevent evaporation and protect samples during processing, storage, and shipment. They have superior quality film and uniform adhesive with two perforated end tabs for accurately positioning films. Packaged in zipper bags Material: 2
Sealing Films prevent evaporation and protect samples during processing, storage, and shipment. They have superior quality film and uniform adhesive with two perforated end tabs for accurately positioning films. Packaged in zipper bags Material: 2
Bellco Glass, Inc. These beakers are useful for general laboratory procedures and are autoclaveable. They have blue graduations to aid in viewing and dispensing liquids. Material: polypropylene Size: 25ml Dimensions: 31x47mm
These beakers are useful for general laboratory procedures and are autoclaveable. They have blue graduations to aid in viewing and dispensing liquids. Material: polypropylene Size: 25ml Dimensions: 31x47mm
Ace Glass, Inc. Beaker, 10L, heavy wall, 225mm OD x 340mm height, not graduated, Duran;
10L Duran heavy wall beaker with spout. Beaker is not graduated. Dimensions: 225mm O.D. x 340mm Height.
Ace Glass, Inc. 1000mL, two-piece jacketed pressure reactor complete with0-8mm valve and 28/15 ball joint bottom outlet, 28/15 ballpoint inlet/outlets, 100mm 5 neck head, addition funnel, condenser, pressure manifold and stirring assembly
1000mL, two-piece jacketed pressure reactor complete with0-8mm valve and 28/15 ball joint bottom outlet, 28/15 ballpoint inlet/outlets, 100mm 5 neck head, addition funnel, condenser, pressure manifold and stirring assembly
Accuflow Systems Saint-Gobain Chemware Beaker, PTFE, Griffin Low Form, 250 mL
PTFE Griffin low-form beaker with 250 mL capacity, designed for use with highly corrosive reagents and other demanding laboratory applications. Constructed from PTFE for exceptional chemical resistance and low contamination risk, this reusable beaker is suitable for mixing, heating, and temporary storage of aggressive chemicals.
- Material: PTFE (polytetrafluoroethylene).
- Capacity: 250 mL.
- Form: Griffin low form.
- Chemical resistance: inert to most corrosive reagents.
- Color: opaque white.
- Typical applications: mixing, heating, and storage of aggressive chemicals.
Ace Glass, Inc. Flask, jacketed, 2L, 100mm(4in) ground Duran; O-ring groove flange, #11 Ace-Thred™; inlet/outlet for3/8in ID tubing
2L jktd cylindrical reaction flask with 100mm (4) Duran flat, ground flange and o-ring groove. Features a water/steam jacket with #11 Ace-Thred connections on jacket inlet/outlets for use with 3/8 I.D. tubing. Flask is supplied with one CAPFE o-ring for Duran flange.
Ace Glass, Inc. Flask, reaction, 3L, jacketed, 168mm O-ring groove flat flange, 170mm bottom OD x 260mm H, #11 Ace-Thred joints on jacket inlet/outlet for use with 3/8in ID tubing
3L jacketed reaction flask with round bottom, and #11 Ace-Thred joints on jacket inlet/outlet for use with 3/8 I.D. tubing. 168mm o-ring groove flat flange is used to seal a head, instead of a flat gasket. Jacketed for temperature control of ingredients. Supplied with CAPFE o-rings. Dimensions: 170mm bottom O.D. x 260mm H.
CELLTREAT Scientific Products 600mL Graduated Beaker, Polypropylene, Non-sterile
Molded pouring spouts and rolled lip for dripless work environment. Angled walls for easier handling and sample retrieval. Nesting design for easy stacking and storage. Smaller case quantities are easier to store and are ideal for small scale users. Polypropylene material for resistance to a variety of strong acids, bases and solvents. Every case is printed with the lot number for quality traceability. Packed non-sterile, 100/case.
