Beakers
Glass beakers can be heated to much higher temperatures than the plastic counterparts, while offering higher clarity for content visibility and measuring. Glass beakers feature uniform sidewalls and bottom thicknesses with a flat bottom and a beak, or small spout, for easier pouring. Glass beakers may have graduated markings on their side that are accurate within 10 percent, though a graduated cylinder or volumetric flask is recommended for precise volume measurements.
Laboratory are available in a range of materials and in sizes from 10 mL to 6 L. Although glass beakers are common, beakers are also made from a variety of plastic resins (PMP, polystyrene, polypropylene, PFA, polymethylpentene, HDPE, ETFE, PTFE, and more). You may also find beakers made from stainless steel, quartz, and carbon.
A variety of beaker types are available:
- Griffin or Low Form: Shorter versions, with or without pouring lips and made of standard weight or heavy-duty borosilicate glass or polypropylene plastic
- Berzelius or Tall Form: Taller and narrower than Griffin beakers, but with similar characteristics
- Pharmaceutical: Taller and more narrow, these beakers are usually graduated in both milliliters and ounces and may have double pouring spouts
- Tri-Cornered: Plastic, disposable, and stackable, these beakers feature a triangular top opening that offers three dripless pouring spouts
- Handled: Glass beakers can have attachable handles and plastic beakers may have molded-in handles; larger handled beakers with spouts may be called pitchers
- Colored Markings: Most beakers have areas on the side suitable for writing; these marking spots are also available in white or your choice of colors
Ace Glass, Inc. Beaker, 20L, heavy wall, 285mm OD x 430mm height, not graduated, Duran;
20L Duran heavy wall beaker with spout. Beaker is not graduated. Dimensions: 285mm O.D. x 430mm Height.
Cole-Parmer elements Plastic Beaker, Transparent PP, 600 mL, 25/pk
Featuring pour spouts, molded in graduations, and heat resistance from 5 to 248F (-15 to 150C) these polypropylene beakers are excellent for general use in the lab.
Ace Glass, Inc. 150L CYL,JKTD,FLASK,3in BP
Jacketed, cylindrical kilo scale reaction flasks featuring removable flush seal valves, beaded pipe jacket inlet/outlets and bottom drain. Double-sided graduations facilitate left or right hand orientation. 10 to 20L flasks have 200mm Duran style o-ring grooved flanges while larger flasks have 300 to 400mm KF style flat flanges. All flask sizes thru 50 liter have all glass lower seals, larger flasks incorporate silicone lower seals. Low aspect ratio saves hood space. Temp range: -60°C to 200°C. Max jacket pressure: 8 psig.
Ace Glass, Inc. 50L CYL,JKTD,FLASK,3in BP
Jacketed, cylindrical kilo scale reaction flasks featuring removable flush seal valves, beaded pipe jacket inlet/outlets and bottom drain. Double-sided graduations facilitate left or right hand orientation. 10 to 20L flasks have 200mm Duran style o-ring grooved flanges while larger flasks have 300 to 400mm KF style flat flanges. All flask sizes thru 50 liter have all glass lower seals, larger flasks incorporate silicone lower seals. Low aspect ratio saves hood space. Temp range: -60°C to 200°C. Max jacket pressure: 8 psig.
Ace Glass, Inc. Funnel, addition, jacketed, 2000mL, 29/32 joints, 6mm PTFE, stopcock
2000mL graduated addition funnel with outside jacket for cooling and/or heating. Jacket extends from just below shoulder of vessel down to the bottom tube just below the stopcock. Stopcock is a 6mm bore PTFE plug. Bottom drip tube extends to the edge of the lower, 29/32 inner standard taper joint. Top outer reinforced joint is also 29/32. Side hose barbs are size D for 3/8 I.D. tubing.
Ace Glass, Inc. 30L CYL,JKTD,FLASK,3in BP
Jacketed, cylindrical kilo scale reaction flasks featuring removable flush seal valves, beaded pipe jacket inlet/outlets and bottom drain. Double-sided graduations facilitate left or right hand orientation. 10 to 20L flasks have 200mm Duran style o-ring grooved flanges while larger flasks have 300 to 400mm KF style flat flanges. All flask sizes thru 50 liter have all glass lower seals, larger flasks incorporate silicone lower seals. Low aspect ratio saves hood space. Temp range: -60°C to 200°C. Max jacket pressure: 8 psig.
Ace Glass, Inc. 150L CYL,JKTD,FLASK,3IN BP
Jacketed, cylindrical kilo scale reaction flasks featuring removable flush seal valves, beaded pipe jacket inlet/outlets and bottom drain. Double-sided graduations facilitate left or right hand orientation. 10 to 20L flasks have 200mm Duran style o-ring grooved flanges while larger flasks have 300 to 400mm KF style flat flanges. All flask sizes thru 50 liter have all glass lower seals, larger flasks incorporate silicone lower seals. Low aspect ratio saves hood space. Temp range: -60°C to 200°C. Max jacket pressure: 8 psig.
Med Vet International Stainless Steel 3-Hole Plate, J1072NA
TTA (Tibial Tuberosity Advancement) PlatesStainless SteelPlate 3 hole x 42mm
Med Vet International Stainless Steel 4-Hole Plate, J1072NB
TTA (Tibial Tuberosity Advancement) PlatesStainless SteelPlate 4 hole x 52mm
MSC Tilsatec Cut and Abrasion-Resistant Gloves, GP2000MF, Polyester, Microfoam Nitrile, Small, 12/Pk.
These cut and abrasion-resistant gloves provide essential hand protection for industrial tasks. Constructed from a durable polyester knit, they feature a micro-foam nitrile coating on the palms and fingertips to ensure superior grip in various conditions. Designed with a seamless lining, these unisex gloves offer a comfortable fit and consistent performance across a range of applications.
- ANSI/ISEA cut resistance level A1
- ANSI/ISEA abrasion resistance level 3
- ANSI/ISEA puncture resistance level 0
- Micro-foam nitrile coated palms and fingertips
- Knit cuff style
- Seamless polyester lining
- Red glove color with black coating
